[HOAX] (Second) Mylow Bar-Magnet Motor on Glass Table

[Magneticitist]

even though this is supposedly a hoax, and mylow even admitted it himself, how the hell did he do it? the fishing line claim seems accurate at first, but it would have had to be a loop that was being spun by a small dc motor or something, and a second person provided the tension at the right time and activated the motor. the next problem is that he walked around the entire table seemingly without having to step over any wires and the point at which he walks around, the motor does not slow

[jotacril]

there is a 10 000 us$ reward to the first person to make a true perpetual machine work.

Youtube is full of people saying they did it.

Why has the reward not been claimed till now?

[MagneticSeer]

@jotacril

10,000 reward by who ?

give me a link i going to take the money , if it got nothing to do with the govermnet or other agency that will murder me , then cool !

[delvis11]

he sets the stator assembly back on top of the wood pieces. i was wondering how he got the bottom of the stator assembly through the two inch gap in the fishing line. on sec 1.58 you can see him moving his hand toward the back to pull the end of the line around the bottom of the stator. I think he is using one of his fingers on his right hand to widen the fishing line to fit around the bottom of the stator assembly. take a look

[ttward2]

Just like MythBusters would say Busted!!!

watch?v=dORKOhwLSP4

[ttward2]

and

watch?v=bw-8YJvicrw

[healdv]

I've been following this for a while now and read PESWiki etc.

Great work Mylow. I'm always skeptical but im open minded but this certainly looks like the real deal.

You just need to get it turning an alternator now and get it generating electricity for you.

When you make one out of easily bought parts im willing to have a go building a replication myself to further validate it.

[killawhat1]

Awesome you won me over with this Vid.

Respect!!!

[AnthonyBackman]

Good luck and God speed Mylow.

[SpellForth]

Mylow, awesome video! Thank you for sharing this here.

If I may ask two things, one - do you have access to a volt/amp meter? Could you check from center to edge if there is a current flow. And the second is can you make a sealed box with iron filings to show the magnetic field lines of the device when it is stationary and, as it is moving.

Your explanations are honest and by listening to your voice that you are sincere with what you are trying to show the world.

[gigvideo]

what ever and whoever validate it , people still doubt it... what a foolish attitude all you have! all you need is visit him and see it by yourself... that is the only solution for your foolishness. Mylow your great and focus on the next stage of your project and don't waste your time with them... Get focus of your work and do major improvements. God bless.

[foxxpup]

I would strongly suggest mounting the bearing assembly and the stator support on a common surface and try to rig some kind of xyz control for moving the stator magnet(s). Adjust them towards whatever settings are optimal. Make measurements and publish them. It would improve the chances of effective replication.

Great job!! Don't worry about the visceral verbal attacks. Imagine how much flack Christopher Columbus took for saying that the earth was round but he was right. I'll pray for you.

[waseatenbyagrue]

Also, seeing as the stator assembly is not even attached to the table, wouldn't the forces involved cause it to move, at least slightly, as the platter spins?

[waseatenbyagrue]

It doesn't really spin like you would expect, speeding up when the magnets approach, and slowing during the gap. I call shenanigans.

By the way, this is easily faked using a streaming column of air. Not saying that is how it is done here, since that would be speculation, but just pointing out that video never equals proof. It is just the first step toward validation.

[theoneagain]

i believe you mylow but mylow you need to have it verified by sterling this is a must .

becuase sterling is the only man who can make you credible

[HybridWaterMan2]

Way to go Mylow! You didn't owe anybody this demo, but you did anyway. This is the closest I have seen to HJ motor with your overlapping stator magnets. You also clear up that the motor starts and accelerates on it's own. Looks like the focus is on the neutral zone of the magnetic field.

Have you tried a dual stator assembly yet? Seems like it could be added on other side since you have the armature magnets properly aligned. Keep up the good work.

[PESNetwork]

Mylow shut down those accounts, as part of his frustration. -- Sterling

[waseatenbyagrue]

Frustration of what? You can't post a video of something that allegedly violates the laws of physics and expect that to go unchallenged. This is what science is all about. Challenging the conclusions of others. It is to be expected.

[slinky460]

Challenging the conclusions of others is one thing, but it got personal with name calling, that is when the problems started. That is why Mylow got upset.

[waseatenbyagrue]

Boo hoo, Mylow got upset.  He is a prankster. You really believe his feelings got hurt? You a sucka!

[SpellForth]

If this is a violation - then we need to repeal some laws. :-)

I think plexiglass would be the way to go... mabe greese the mount...

[dipster31]

Incredible. Way to go Mylow.

[tonysam11290]

I used to be skeptical, but now i believe he has built a 100% operational howard johnson magnet motor. Mylow, there will always be nae sayers but there are people, like me and many others, that have faith in you and believe you have done a fantastic thing by showing this technology to the world. Keep up the good work, and hopefully many more replications will be produced to verify your results. Also, have you tried to set up a second stator magnet assembly too help create more torque?

[mgslisser]

If a big replica of this could power a dynamo this is could be the solution to the energy needs of everyone. No more oil, no more polution! Keep on the good work.

[Abrin19]

Ive been watching mylows clip from the very begining and I still think this is important. We should help him come up with a sturdy structure and piece by peice build a controllable unit that could be shown to scientist, Making the unit more stable and more ridgid perhapse could lead to faster rotation. Im gonna get working on it right now.

Lets help eachother and maby we can get som actuall progress and get rid of some moronic (this dosent work cause it shouldnt cause ive been taught so) sayers

[eroutt]

i so want to believe! so i will! good job you have not given up so i will give you that! so how are you going to go about getting this out the the masses!

[onthecuttingedge2005]

Give it to the Smithsonian Institute as a permanent fixture in motion.

[DavidAKZ]

That's brilliant. Why not just filter the people who are nae sayers ?