@Skyfly195 I had a woven carbon fiber sheet 2mm thick and I cut a circle in the dimensions of the wooden firewall. After I sanded with sand paper I glued it with 30min epoxy.
@TheAviation2009 I use exactly what the instructions say, a screw in the front (you can see it in the video) and a rubber band (it is behind the rudder servo) in the back which holds on a wooden hook glued on the back of the canopy with CA. The two parts of the canopy the inside black and the clear outside window are glued with clear two side silicone tape. For safety I use a small piece of tape (you can see it also) where the canopy meets the fuselage.
@TheAviation2009. I sanded very well with sand paper and glue them with the wings with 30min epoxy. I also use the 4 pieces of strong wire (spars) to hold them in place. The holes for the wires don't fit but you can fix them. The two wings are held together with a tie wrap. If you build this plane try to reinforce the firewall. I lost it in the first flights and change it with a 2mm carbon plate glued with epoxy.
wat motor do u have on there
Lizzylooish 4 months ago
@Lizzylooish HXT 35-48 1100KV
vilis65 3 months ago
It doesnt fly without motor? You could fly longer with an elletric plane!
You must make your landings at the same direction with your takeoffs.
Giovanniram22 11 months ago
How do you made the firewall?
Skyfly195 11 months ago
@Skyfly195 I had a woven carbon fiber sheet 2mm thick and I cut a circle in the dimensions of the wooden firewall. After I sanded with sand paper I glued it with 30min epoxy.
vilis65 11 months ago
I want to know how you fix the canopy ?
TheAviation2009 1 year ago
@TheAviation2009 I use exactly what the instructions say, a screw in the front (you can see it in the video) and a rubber band (it is behind the rudder servo) in the back which holds on a wooden hook glued on the back of the canopy with CA. The two parts of the canopy the inside black and the clear outside window are glued with clear two side silicone tape. For safety I use a small piece of tape (you can see it also) where the canopy meets the fuselage.
vilis65 1 year ago
@vilis65
Thank you
One more question
how did you fix the winglets?
TheAviation2009 1 year ago
@TheAviation2009. I sanded very well with sand paper and glue them with the wings with 30min epoxy. I also use the 4 pieces of strong wire (spars) to hold them in place. The holes for the wires don't fit but you can fix them. The two wings are held together with a tie wrap. If you build this plane try to reinforce the firewall. I lost it in the first flights and change it with a 2mm carbon plate glued with epoxy.
vilis65 1 year ago
Ωραίο ανεμοπλάνο!!!
ARTSTUDIODES 1 year ago
@ARTSTUDIODES Και έχει οπως ακούς στα περάσματα και ωραίο ήχο.
vilis65 1 year ago
@vilis65 Ναι πράγματι, σαν αληθινό!
ARTSTUDIODES 1 year ago