How is the result if going from a darker original color to a lighter color? My door panels and plastic interior pieces are gray, and I'd like to dye them to a tan.
I bought a car with tan interior, but I have really nice black leather seats that I wanted to use, would it be feasible to paint/dye the entire dash/door panels?
The interior SEM paint on its own has a more glossy look when compared to the factory interior, especially the Lexus. In your video you added the clear coat. Does the clear coat have a more flat finish than just the paint without the clear coat?
i have a 1980 Z28 camaro, i was wondering if i can dye a dash pad, door panel, console, pillar pads, and all trim (pretty much everything inside the car?)? also would this work on seat belts and carpet?
Once you've dyed interior plastic/vinyl pieces, can the piece be treated like a normal/untreated piece? I.E. After I've put it back on the car, can I clean it like normal, and put on protectants like Armor all etc...?
Would you suggest using the clear coat on something cushiony if you will such as vinyl knee pads in the car or arm rests? Does the clear coat harden and prevent any expanding or shrinking due to temperature changes in the car? Would you just use it on hard surfaces?
We offer these online at Fbodywarehouse,com Type in "Interior Dye" in the search box and we sell them in 4 can sets which will take care of the whole cabin.
@cavedaddy48 They are one in the same being the dye has such a high degree of flex agent in it's formulation it has more of a dye quality then a "paint quality and hence called a dye. You can use SEM products on plastics and metal also.
Hi and great video, my questions, I have a Audi a4 and I like to paint the frames on the doors and dashboard which are made out of plastic. Can I u this ideal for this.
Hi and great video, my questions, I have a Audi a4 and I like to paint the frames on the doors and dashboard which are made out of plastic. Can I u this ideal for this.
Does this paint/dye leave a sticky residue? How does it hold up against constant contact. I wanted to dye my vinyl seats, dash, etc but don't want a sticky residue, chipping, peeling, etc.
I'm currently redying my interior on my 99 Camaro from Charcoal Grey to Landau Black using the SEM products. I have to say, I've only done the rear hatch so far but it looks amazing. Thanks for the Video!
Where can you get that SEM Low Luster Clear you mentioned and used? A thing i do to help with this stuff is put the part i'm painting on a lazy susan. you can get them for about 5 bucks at home depot and it makes it super easy to get even coats. great video, thanks!
Use a fruit brush and spray a coat of the dye and then brush it in to prevent it from becoming stiff. This also works the dye into the fabric deeper for a better color appearance.
Is there anything out there by you guys that I could use to redye the interior of my 06 gto? thanks!
SDpadresSD 2 weeks ago
2-3 thin coats on regular areas is fine, 3-5 on high traffic areas or areas which come in contact with weather seals is good also
Fbodywarehouse1 1 month ago
hhow many coats of clear i believe you only did 2?
TheItalianman69 1 month ago
How is the result if going from a darker original color to a lighter color? My door panels and plastic interior pieces are gray, and I'd like to dye them to a tan.
hunterjumper28 2 months ago
Flash time is 3-5 minutes.
When using the SEM low luster clear and dye you should not need to condition leather as this puts a shell on it and hence does not need hydration.
Fbodywarehouse1 2 months ago
After using this SEM dye product, can i use a conditioner or cleaner such as Leatherique without damaging the finish?
TheMartinG83 2 months ago
Whats your flash time between coats?
Motoveight 3 months ago
I bought a car with tan interior, but I have really nice black leather seats that I wanted to use, would it be feasible to paint/dye the entire dash/door panels?
soulevs 4 months ago
@soulevs Yes this product will do that with good results!
Pete
Fbodywarehouse1 4 months ago
Sounds like the guy on Napolean Dynamite lol
sdsand32885 6 months ago
The interior SEM paint on its own has a more glossy look when compared to the factory interior, especially the Lexus. In your video you added the clear coat. Does the clear coat have a more flat finish than just the paint without the clear coat?
Advancedlites 8 months ago
@Advancedlites Yes adding the SEM Low Luster clear will dull to a Satin finish on GM cars and trucks it will match to a tee.
Fbodywarehouse1 8 months ago
i have a 1980 Z28 camaro, i was wondering if i can dye a dash pad, door panel, console, pillar pads, and all trim (pretty much everything inside the car?)? also would this work on seat belts and carpet?
tylerdoussan 8 months ago
Once you've dyed interior plastic/vinyl pieces, can the piece be treated like a normal/untreated piece? I.E. After I've put it back on the car, can I clean it like normal, and put on protectants like Armor all etc...?
nightmathzombieethan 11 months ago
Would you suggest using the clear coat on something cushiony if you will such as vinyl knee pads in the car or arm rests? Does the clear coat harden and prevent any expanding or shrinking due to temperature changes in the car? Would you just use it on hard surfaces?
DMCSerenity 1 year ago
How Many cans of SEM would I need to do a whole 1980 Camaro interior? And are they available online?
heavy71chevy 1 year ago
@heavy71chevy
We offer these online at Fbodywarehouse,com Type in "Interior Dye" in the search box and we sell them in 4 can sets which will take care of the whole cabin.
Fbodywarehouse1 1 year ago
how exactly do the "dye" products for plastics differ from paints that are formulated for plastics?
cavedaddy48 1 year ago
@cavedaddy48 They are one in the same being the dye has such a high degree of flex agent in it's formulation it has more of a dye quality then a "paint quality and hence called a dye. You can use SEM products on plastics and metal also.
Fbodywarehouse1 1 year ago
Yes this works fine on both plastics and metal as well.
Fbodywarehouse1 1 year ago
Hi and great video, my questions, I have a Audi a4 and I like to paint the frames on the doors and dashboard which are made out of plastic. Can I u this ideal for this.
Again great VID...
SupraPorsche1 1 year ago
Hi and great video, my questions, I have a Audi a4 and I like to paint the frames on the doors and dashboard which are made out of plastic. Can I u this ideal for this.
Again great VID...
SupraPorsche1 1 year ago
This product will NOT leave any residue etc. That is one of the reasons we offer only SEM products.
AllGenTransAms 1 year ago
Does this paint/dye leave a sticky residue? How does it hold up against constant contact. I wanted to dye my vinyl seats, dash, etc but don't want a sticky residue, chipping, peeling, etc.
gunforme 1 year ago
@gunforme This will NOT peel or leave a residue that is why we choose only SEM products for redye of interior.
Fbodywarehouse1 1 year ago
We sell and use SEM paints
Fbodywarehouse1 1 year ago
@Fbodywarehouse1 Do you have any suggestions for cloth seats? I've seen two different brands (dupli-color, simplspray) with mixed reviews.
*Seats are beige, want to dye them gray.
VeritasIncrebresco 1 year ago
@VeritasIncrebresco Cloth seats can be tricky you may be best to recover and not redye
Fbodywarehouse1 1 year ago
WHAT BRAND IS THE PAINT THAT U USE
xv3stdemon 1 year ago
Does this work on plastics? Dies it crack or peel at all if so how long does it last?
ErikGP94 1 year ago
just a quick quesitons does this work on vinyl seats? they are from a datsun... Looks really goo btw
chipo022 1 year ago
@chipo022 Yes is made to work on that material
Fbodywarehouse1 1 year ago
Would this work good for a 1962 Lincoln Continental dashboard, taking it from turd brown to black?
gibbletz 2 years ago
I'm currently redying my interior on my 99 Camaro from Charcoal Grey to Landau Black using the SEM products. I have to say, I've only done the rear hatch so far but it looks amazing. Thanks for the Video!
Stealthcola 2 years ago
@Stealthcola SEM dyes are great!
Fbodywarehouse1 1 year ago
How much would be low luster clear and a SEM flat interior black? I think I can do this. Thanks!!!
IdahoVideo 2 years ago
How long do you wait between dye and clearcoat coatings?
Kurtis570 2 years ago
3-5 minutes is fine
Fbodywarehouse1 2 years ago
Where can you get that SEM Low Luster Clear you mentioned and used? A thing i do to help with this stuff is put the part i'm painting on a lazy susan. you can get them for about 5 bucks at home depot and it makes it super easy to get even coats. great video, thanks!
Mark37251 2 years ago
hello, so these steps apply to my dashboard of my car?
i have a 1997 eagle talon awd just in case.
50N1C800M 2 years ago
@50N1C800M Sure do same exact process
Fbodywarehouse1 2 years ago
@50N1C800M Follow the same steps as shown in the video
Fbodywarehouse1 1 year ago
yes follow the same steps for any auto or marine use.
Fbodywarehouse1 1 year ago
Yes same process would apply.
Fbodywarehouse1 1 year ago
Sure can and will look great!
Fbodywarehouse1 1 year ago
What can you do for door panels. I need to dye a 6 inch wide strip of carpet as well as vinyl on the panel. What would you suggest?
IdahoVideo 2 years ago
@IdahoVideo Use a nylon fruit brush to brush the dye in after spraying on.
Fbodywarehouse1 2 years ago
Use a fruit brush and spray a coat of the dye and then brush it in to prevent it from becoming stiff. This also works the dye into the fabric deeper for a better color appearance.
Fbodywarehouse1 1 year ago
does blow-drying really helps accelerates the paint to cure?
tomsterumbler 2 years ago
I have never heard of this or done this (blow drying) so can not give you an educated answer either way.
Pete Fbodywarehouse
Fbodywarehouse1 2 years ago
No problem glad we could help!
Fbodywarehouse1 2 years ago
i cannot thank you enough for making and posting this video, none the less THANK YOU :D!
carlosrawr 2 years ago
Thanki will be dying my 86 Monte Carlo using SEM burgundy.
mem01122 2 years ago
great work, thank you for sharing with us.
boost4g63 2 years ago
good video pete!
dgtldesigner 3 years ago