when i try and select a sidechain on the fruity limiter it doesnt come up with channels to select why is this it only seems to work on the master but that doesnt really seem to have any effect on the track itself ARGHHH
is it not overkill putting a compressor on every channel you want to put sidechaining on? In Because in some electronic music you might need to sidechain 5-10 synths. Is this still better then using a peak controller and linking it to the volume fader, or even the gain?
I want it as a automation clip but it doesnt work! If i use sidechain it will sidechain the whole song and i just want to use i at some parts. how do i do??
if this way is too hard for some of you guys you can just do this.
hook up whatever you want to side chain to a mixer channel. then add the effect gross beat. once on gross beat there will be two sections. leave the top one on empty and on the bottom one, click the one that says side chain.
I had a problem understanding how sidechaining the kick to a different channel effects the pad sound, and its not too clear that you have to route the pad audio to the sidechain channel for it to have an effect, or have I done something wrong?.
Back again with another question! haha XD When i do sidechain my drums to my pads/synths, the effects on those pads/synths (delay, reverb, filters, etc.) are applied to my snares/kicks causing a mass amount of chaos especially when mixing down tracks. Any advice on how to fix/adjust things at all?
@imageline for some reason the when i try and select a channel to sidechain it doesnt com up with sidechain to this track only. Also when i tell the channel to sidechain (in my case the kick to the synth) and then try and select the channel in the fruity limiter as you did at 2:00 theres nothing there to select and i have no idea why can you help me?
@thukon once you try both, sidechaining will always sound more authentic. the sidechain isnt a perfectly consistent modulation, which is what makes it so cool.
Is it possible to link as many tracks as you want to the track you're sidechaining? I was going to try it but I'm nervous I might butcher my entire track eh. I want to link up to 10 synth channels to a kick and snare drum if that helps explain my issue a bit better? haha
thanks pal!!! all my tunes done on fl9 have sounded a bit basic but ive just watched your vid an made a beautiful sidechain within 10 minutes ! nice one
thanks pal!!! all my tunes done on fl9 have sounded a bit basic but ive just watched your vid an made a beautiful sidechain within 10 minutes ! nice one
I kind of want to do the opposite. When I do double kick (from the drums) It usually causes the drums and cymbals to duck in and out with the bass. What's the best way to eliminate this while keeping the kick now and thumpy sounding?
How do you do this with third party VSTs? For example, I'm using the Softube CL1B, which has a selector for external sidechaining. Doesn't seem to do anything in FL.
i finally get it! Taken me hours to figure it out. Before, I didn't understand the difference between an audio route and a side chain so i looked at Mr Special song which comes with FL and tried to find out what was used and realise now that the instruments are routed to the labelled sub groups and then those are routed to the master so it's clearly not a side chain and the fact you can adjust the send volume too whereas a side chain you can't (correct me if I'm wrong!), 100% confirms this :)
@Tozzywozzy - From the manual - In FL Studio, there are two independent audio paths initiated when one Mixer track is linked to another using the Track Send / Sidechain Enable Switch.
1. A regular send path that responds to the send volume knob and is audible on the destination Mixer track.
2. A sidechain path that is unaffected by the send volume knob and is NOT audible on the destination Mixer track UNLESS it is picked up by a plugin with (sidechain) input capabilities.
anyway, i was having troubles time ago trying to sidechain stuff using Wavearts Trackplug. This plugin (eq+2 comps+gate+limiter) has an "external" ducking source selector, though i never managed to get the sidechaining sound affect the compressor. I looked for the pugin's documentation, only to find out that every DAW setup but the fl studio one is covered in it.
I saw on zircon's "Just Hold On" a Sidechain sampler that triggers the effect on the song's chords without the kick's signal at the beggining of the song, how do I do that, how do I make that sampler?
. i recently just started making beats got em on my channel, checkem if you like :) any constructive advice or tips also appreciated, got that oldskool feeling
idno.. opinions keep me motivated & helps me craft and progress :)
i like the sound the gross beat gives me when i use the gate fade to sidechain. but when i export the sound it doesnt come out sidechained its all messed up. i dont know what to do about it. any help would be much appreciated?
@DJApeCat no its bought. its weird when it does it cuz the only way i can get my project out without it messing up is record it into edison then save the edison sample. i just get tired of using peak controller and this method taught in this tut doesnt work for me for some reason.
@DJApeCat no its paid for. what i have to do is record into edison for it not to mess up. i can show u some examples if you wanna hear exactly what its doing.
2nd there will be more talents who will show their talent to world, 3rd, youll compensate your free copy expenses through advertising sponsors ;) Because price of fl studio makes me do not use it at all or use cracked program.... I talk from user position ;)THe number of FL studio USERS should increase FAST... And more sponsors would like to show their products in your advertising window ;)
Hey Image line guys... You made excelent program..... After newtone is going out it will be cool program ;) I would advice to add non electric samples and generators to it.. and it would be as universal as all other soft together... Now i would like to say my idea about how make your soft more popular ;) 1) Make free version and not free version 2) Make Advertisement window in free version, and show Advertisement... two things will hapen..... 1st there will be more users of fl. CONTINUED....
@djkoen15 - You can. It may not be exactly the same tho. Depends on the audio material. You can also use the filter envelopes in Love Philter synced to tempo.
@Elementerials change your bitrate in ASIO. If it buffers to a low bitrate, make it higher. The buffer will take a fraction longer, but there will be no popping and crackling will be gone. It should default at 512 Samples, change it up to 768 and see how that works for you.
Hey, novice here. What genres is sidekicking generally used for besides Trance/Dance? Are there common or maybe even quirky but cool uses for sidechaining other than for making synths pump?
@Darkozl - Ducking music levels under a voice-over on videos. Subtle (non-pumping) sidechain can open up a mix. There is a point at which you can't hear it working but the mix sounds better. Also sidechaining is a generic term, it doesn't mean 'compression'. It can be any sidechain signal controlling any effect (that accepts sidechains). Possibilities are limitless.
HI I USED TO CONNECT MY CONTROLLER TO FL 9 BUT NOW I DOESNT MAKE ANY PITCH BENDINGS I TRIED EVERYTHING I EVEN RESETED FL STUDIO IN CASE I MESSED THINGS UP BUT IT DIDNT FIX IT , THE MIDI IN LIGHT SIGNAL FROM FL TURNS ON WHEN I MOVE THE PITCH WHEEL BUT THE KNOB IN THE WRAPPER WONT MOVE AT ALL ...
If you need to sidechain many synths with only one kick, do you need to ad one limiter/compressor) on each mixer track? Isn't the peak controller easier in that case?
I just wondered is it not possible to mute the kick track but still hear the effect ive tried this and it doesn't work i tried muting the kick track and putting the volume of the kick track to 0db but the effect dissapears , this is so i have a sidechain kick track in my tracks which is not heard and a different kick to use so i can still have the ducking effect whilst a kick is not playing. Thanks
It'd be SOOOO much easier if they had PreFader and PostFader effect sends... Really a shame they don't have pre and post sends... It's nice to send 100% of the effect with the click of a button. Ugh.
i used the peak controller method to side-chain for at least two years, and in the past two or three months i've almost exclusively used this method. it's much more direct, precise, it has fewer latency issues -- and it is WAY MORE VISUAL, you can actually SEE the reduction caused by the side-chain, which i love.
i still use the peak controller, but mostly only to control delays and reverbs or any plugins aside from the fruity limiter.
It is easy and I use it a lot. Don't know about 'more' easy tho. However note the peak-controller may not catch the fastest transients while the Fruity Limiter (compressor section) always will. The compressor is faster and more flexible.
Send me your beats!
Rayzilini 2 days ago
my song just went a few notches up, sounds a lot more professional thanks!! XD
aSOULproduction 3 weeks ago
when i try and select a sidechain on the fruity limiter it doesnt come up with channels to select why is this it only seems to work on the master but that doesnt really seem to have any effect on the track itself ARGHHH
relentlessaddict98jm 3 weeks ago
@relentlessaddict98jm It's because you have the limiter on the wrong track.
rootvalue 12 hours ago
finally someone who got to the point!! thank you.
Organonfire 1 month ago
i love this guy
jbarnett54 1 month ago in playlist FL Studio Greatest vids, updates and tips
how do you keep effects on the sound uve used with out it interfering with kick?
sinfielddub 1 month ago
2:20 !
"... now we are pumping... "
Best phrase in this video :D
lighthunter235 1 month ago
@lighthunter235 LOL HAAAA
I just heard him I'm still LMAO 3AM!
Rayzilini 2 days ago
I did this on a couple beats on my channel check em out
Mr763Productions 1 month ago
is it not overkill putting a compressor on every channel you want to put sidechaining on? In Because in some electronic music you might need to sidechain 5-10 synths. Is this still better then using a peak controller and linking it to the volume fader, or even the gain?
WibbisaurusRex 2 months ago
This has been flagged as spam show
Hey guys, i've been wodering what's better: FL Studio or Ableton? Please answer!
Thanks. -Kitte3H
Lbpbest1 3 months ago
i love these videos
wuziq 3 months ago
This has been flagged as spam show
Hey please check out my beats! Thank ou
PlumBeatz 3 months ago
I want it as a automation clip but it doesnt work! If i use sidechain it will sidechain the whole song and i just want to use i at some parts. how do i do??
TalentRecordings 3 months ago
Thanks for this, really helpful.
JBNiq 3 months ago in playlist More videos from imageline
This has been flagged as spam show
Nice! Check my page if you need some sample kits...
ltbproductionz 3 months ago
LOL AT 0:00 EPIC VOCODER
"EF EHL SHTUDEEO GOOROO" HAAHAHA
PSV7200 3 months ago
NOW WE'RE PUMPING
ZgtPe3PP3eRzzz 3 months ago
Check out my tutorial on 3 methods of sidechaining
/watch?v=ev5HtCpB_7o
prasanthannagan 4 months ago
Excellent tutorial.
marcuelcajon 4 months ago
lol' now were pumping"
if this way is too hard for some of you guys you can just do this.
hook up whatever you want to side chain to a mixer channel. then add the effect gross beat. once on gross beat there will be two sections. leave the top one on empty and on the bottom one, click the one that says side chain.
RocksnRagsProduction 4 months ago
I had a problem understanding how sidechaining the kick to a different channel effects the pad sound, and its not too clear that you have to route the pad audio to the sidechain channel for it to have an effect, or have I done something wrong?.
Digideus 5 months ago
Back again with another question! haha XD When i do sidechain my drums to my pads/synths, the effects on those pads/synths (delay, reverb, filters, etc.) are applied to my snares/kicks causing a mass amount of chaos especially when mixing down tracks. Any advice on how to fix/adjust things at all?
cudi1is3god 5 months ago
Tudai
MrReman23 5 months ago
i can i make a reverse sidechain? When the peak controll sound the compressor not sound and viceversa? is possible?
BenitoBerlusconi 6 months ago
Awesome!
MegaDnz 6 months ago
Wait, i dont understand, what are the benefits of using sidechaining as opposed to just using an LFO?
thukon 6 months ago
@thukon - Perfect synchronization with your percussion, and percussion waveform following. LFO is a blunt effect in comparison.
imageline 6 months ago 15
@imageline for some reason the when i try and select a channel to sidechain it doesnt com up with sidechain to this track only. Also when i tell the channel to sidechain (in my case the kick to the synth) and then try and select the channel in the fruity limiter as you did at 2:00 theres nothing there to select and i have no idea why can you help me?
relentlessaddict98jm 3 weeks ago
@thukon once you try both, sidechaining will always sound more authentic. the sidechain isnt a perfectly consistent modulation, which is what makes it so cool.
HyperSonic707 3 weeks ago
Is it possible to link as many tracks as you want to the track you're sidechaining? I was going to try it but I'm nervous I might butcher my entire track eh. I want to link up to 10 synth channels to a kick and snare drum if that helps explain my issue a bit better? haha
cudi1is3god 6 months ago
@cudi1is3god - You can't hurt anything permanently. Yes you can link as many sidechain tracks as you want.
imageline 6 months ago
@cudi1is3god Just save a new version mate and you are fine :)
BlackAera 6 months ago
Yes, fruity limiter is also a compressor... *yay!* And a gate, bonus! *BONUS GATE!*
LOL
LeBamdeBam 6 months ago
that chord progression could be used perfectly with Edge of Glory by Lagy Gaga.
stewie274 6 months ago
Miles Diego - Disaster Original mix
officialmilesdiego 6 months ago
Watch My Video For 3 Easy Methods On How To Sidechain
/watch?v=ev5HtCpB_7o
prasanthannagan 6 months ago
AHH! YES! I got it now.
Dooke80 7 months ago
can you sidechain with Maximus?
Iwantapplez109 7 months ago
Gracias uuffff q buen video
jordandgx620 7 months ago
thanks for the tutorial :) and yeah u should continue on that tune, has a good vibe to it ;)
Apexyy 7 months ago in playlist Music Production
I came here because Benn Jordan from The Flashbulb liked and favorited this video... now I'm asking, it's The Flashbulb using FL Studio?
TheIndustrialism 8 months ago
hey can you make a tutorial for mixing and mastering ? that would be great!!
jmarquies 8 months ago
@jmarquies agree :)
Apexyy 7 months ago in playlist Music Production
This has been flagged as spam show
thanks pal!!! all my tunes done on fl9 have sounded a bit basic but ive just watched your vid an made a beautiful sidechain within 10 minutes ! nice one
redcharlie90 8 months ago
thanks pal!!! all my tunes done on fl9 have sounded a bit basic but ive just watched your vid an made a beautiful sidechain within 10 minutes ! nice one
redcharlie90 8 months ago
lol bonus gate
odaxelagniaproject 8 months ago
Thank you so much! All the user-created videos are very misleading an unclear. This is so easy, it makes me feel stupid for not catching on sooner!!
quickbeeare 9 months ago
Doesn't this mean you can LFO anything. Holy fucking shit. I always wanted to do that.
Jannto 9 months ago
I kind of want to do the opposite. When I do double kick (from the drums) It usually causes the drums and cymbals to duck in and out with the bass. What's the best way to eliminate this while keeping the kick now and thumpy sounding?
ihavetourettesxx 9 months ago
How do you do this with third party VSTs? For example, I'm using the Softube CL1B, which has a selector for external sidechaining. Doesn't seem to do anything in FL.
futilerecordings 9 months ago
i finally get it! Taken me hours to figure it out. Before, I didn't understand the difference between an audio route and a side chain so i looked at Mr Special song which comes with FL and tried to find out what was used and realise now that the instruments are routed to the labelled sub groups and then those are routed to the master so it's clearly not a side chain and the fact you can adjust the send volume too whereas a side chain you can't (correct me if I'm wrong!), 100% confirms this :)
Tozzywozzy 9 months ago
@Tozzywozzy - From the manual - In FL Studio, there are two independent audio paths initiated when one Mixer track is linked to another using the Track Send / Sidechain Enable Switch.
1. A regular send path that responds to the send volume knob and is audible on the destination Mixer track.
2. A sidechain path that is unaffected by the send volume knob and is NOT audible on the destination Mixer track UNLESS it is picked up by a plugin with (sidechain) input capabilities.
imageline 9 months ago
is it possible to create a side chain bus?
Like using a mixer track as an aux send and have a fruity limiter in that track alone and then send any instrument I needs sidechaining?
AeonFlexMusic 9 months ago in playlist FL Studio | Mixing & Production Techniques
LOL at the end ''is this ducking ?'' nice Guru. your tutorials are always fun and easy to learn. thx a lot
BliTZBLaZR 9 months ago
is sidechaining the same as aux send?
lyricalgza 9 months ago
@lyricalgza - no. Aux send is an audio path on a mixer and sidechaining is a concept.
imageline 9 months ago
@imageline Thanks, I kinda get it. FL Studio's mixer would be 100x better if it had aux send don't you think?
lyricalgza 9 months ago
@lyricalgza - It has (the equivalent) of AUX sends already. Infact far superior, you can route any track to any other track.
imageline 9 months ago 4
@imageline Great! Thanks again Guru.
lyricalgza 9 months ago
how to do something like the opposite of this? i mean lowering the volume whenever the kick hits.....
malatement 9 months ago
Is it normal im missing a bunch of knobs and I dont have the sidechain option, only two curve options
greeksdorok 10 months ago
nice and funny video :)
anyway, i was having troubles time ago trying to sidechain stuff using Wavearts Trackplug. This plugin (eq+2 comps+gate+limiter) has an "external" ducking source selector, though i never managed to get the sidechaining sound affect the compressor. I looked for the pugin's documentation, only to find out that every DAW setup but the fl studio one is covered in it.
What am i doing wrong?
salvosuper 10 months ago
how to choose multiple sidehain source?
og882001 10 months ago
I did exactly what you did in the vid, but the only thing that changed is now my kick sounds distorted.
9toesmusic 10 months ago
2:19 Now, we are pumpin! :-))
Elnufo 10 months ago
This has been flagged as spam show
good!! :)
I like this
visit my channel and subscribe, enjoy my videos!! :D
DjLeoVillagra 11 months ago
Yeah! thank you!
Silvertoad99 11 months ago
IS there a way to create the side chain sound
without hearing the kick?
Nice upload thoo
i didnt know Limiter could do that
AdisaStrictlyBidness 11 months ago
@AdisaStrictlyBidness - Yes and it's explained/shown in the video. 1:30
imageline 11 months ago
@AdisaStrictlyBidness
u can do it with The Fruity Love Philter ! Search on YT : Sidechain Love Philter or something like that ! :D
DownFlex 10 months ago
I saw on zircon's "Just Hold On" a Sidechain sampler that triggers the effect on the song's chords without the kick's signal at the beggining of the song, how do I do that, how do I make that sampler?
Angel090890 11 months ago
@Angel090890 just set kick volume to 0% :)
lighthunter235 11 months ago
fuck yea! no more messing with peak controller
lolik66666 11 months ago 29
yes pump it! lol! Im so excited
StompNotes 11 months ago
Now we'r pumpin'! :D
M0ttes3n 1 year ago 2
is this better then using peak controller and compressor?
KINGxUxTUBE 1 year ago
@KINGxUxTUBE - It's the 'usual' way of doing it. Whatever sounds good is good :)
imageline 1 year ago
Is it possible to sidechain compress with other compressor insted of fruity limiter?
sergiofrias25 1 year ago
@sergiofrias25 - Sure, if it accepts multiple inputs.
imageline 1 year ago
@imageline ive'd tried with waves C1 but it only shows one input...
sergiofrias25 1 year ago
Comment removed
anonymousborn 1 year ago
Hey man, nice tutorial
What recording program do you use?
officialshintek 1 year ago
. i recently just started making beats got em on my channel, checkem if you like :) any constructive advice or tips also appreciated, got that oldskool feeling
idno.. opinions keep me motivated & helps me craft and progress :)
peonbeats 1 year ago
Hello there nice tut just got a few questions:
1. My kick is on Channel 1
2 My Bass is on Channel 2
I side chain my bass to the kick or kick to the bass what ever it was i forgot,
But All the Fx and EQ and Plugins i am using for my bass Route to my kick??
Say if i have some reverb on my bass (channel 2)
it will also go to my kick (channel 1) so my damn kick has reverb?!
cheers
123snargy 1 year ago
ไอ่สัดเอ๊ย-*- กูฟังไม่รู้เรื่อง
SommittSon 1 year ago
ไอ่สัดเอ๊ย-*- กูฟังไม่รู้เรื่อง
SommittSon 1 year ago
my fl studio keeps adding a crackling sound to my rendered track how do i stop this please help
MrFloydc2 1 year ago
i like the sound the gross beat gives me when i use the gate fade to sidechain. but when i export the sound it doesnt come out sidechained its all messed up. i dont know what to do about it. any help would be much appreciated?
TonyCassette 1 year ago
@TonyCassette
Free version of Gross Beat?
DJApeCat 1 year ago
@DJApeCat no its bought. its weird when it does it cuz the only way i can get my project out without it messing up is record it into edison then save the edison sample. i just get tired of using peak controller and this method taught in this tut doesnt work for me for some reason.
TonyCassette 1 year ago
@DJApeCat no its paid for. what i have to do is record into edison for it not to mess up. i can show u some examples if you wanna hear exactly what its doing.
TonyCassette 1 year ago
@TonyCassette - Why not ask in Looptalk?
imageline 1 year ago
This a very useful tutorial, the method is great and it works...xD
Davinci110 1 year ago
Does this FL Studio Guru have a Producing Name for any of his music? I wanna check his stuff out =)
newzealanddude92 1 year ago
nop, no work , i try but... no get it :S
famadj 1 year ago
2nd there will be more talents who will show their talent to world, 3rd, youll compensate your free copy expenses through advertising sponsors ;) Because price of fl studio makes me do not use it at all or use cracked program.... I talk from user position ;)THe number of FL studio USERS should increase FAST... And more sponsors would like to show their products in your advertising window ;)
FruityLoopsas 1 year ago
Hey Image line guys... You made excelent program..... After newtone is going out it will be cool program ;) I would advice to add non electric samples and generators to it.. and it would be as universal as all other soft together... Now i would like to say my idea about how make your soft more popular ;) 1) Make free version and not free version 2) Make Advertisement window in free version, and show Advertisement... two things will hapen..... 1st there will be more users of fl. CONTINUED....
FruityLoopsas 1 year ago
Bonus gate!!
sanakthe 1 year ago
IF I mute the kick on some parts of song,Fruty Limiter Sidechain do not work? How to mute a kick and sideshain do the same job with unmuted kick?
MaxPulseMusic 1 year ago
Hi Guys!
Want to listen to som music whit sidechain inside?
check out my Song.
Thanks!
richardampa 1 year ago
Ahh nevermind had to change to Comp. Lol.
thenetslug 1 year ago
Why does my limiter not look like yours? :3
thenetslug 1 year ago
thank you thank you thank you thank you thank you!!!!!!!!!!! <3
croatianthug 1 year ago
wher iits the peakcontroll????
kayastar89 1 year ago
You can't do this in FL 8 with the limiter , or am i wrong?
i mean exactly like the way in this vid.
homerboy77 1 year ago
@homerboy77 this sidechaining method was added in fl9 i think
Lotheareon 1 year ago
@Lotheareon okey thanks :P
homerboy77 1 year ago
frickin awsome man!
jimmytang77 1 year ago
best utube channel ever
mxtheriault 1 year ago
omg gracias por el tutorial muy usado en la musica electronica general...saludos
beatmaker17 1 year ago
thanks for the fast reaction!! checkout my new vid.. i used ur tip :P
djkoen15 1 year ago
instead of limiter i use 'peak controller'.. same result right?? or am i wrong
djkoen15 1 year ago
@djkoen15 - You can. It may not be exactly the same tho. Depends on the audio material. You can also use the filter envelopes in Love Philter synced to tempo.
imageline 1 year ago
@djkoen15 you`re right :-)
NicoQuedenbaum 1 year ago
yeah right, good tut, thanks imageline :-)
Elnufo 1 year ago
and ive been running mad circles in fl 8 these couple years to get the same side chain / silent side chains that you just got in seconds :|
i guess i should spend some time actually reading up instead of experimenting all day
syruf 1 year ago
THIS SOUNDS REALY NICE. JUST NEED A REALY NICE KICK FOR IT! :)
BluSUBsound 1 year ago
Thank you sooo much
Mondomania03 1 year ago
This makes the output crackle and pop all the time. changing the threshold/gain doesnt change anything.
Elementerials 1 year ago
@Elementerials - Try downloading the project linked in the video information and comparing it to your set-up. Something must be set incorrectly.
imageline 1 year ago
@Elementerials change your bitrate in ASIO. If it buffers to a low bitrate, make it higher. The buffer will take a fraction longer, but there will be no popping and crackling will be gone. It should default at 512 Samples, change it up to 768 and see how that works for you.
SignedAnon 1 year ago
@Elementerials
Thats your soundcard
mem10mem 1 year ago
HAHA! At 1:15, "Bonus Gate!" Lol!
1one3three2two 1 year ago 25
@1one3three2two I know, this guy's pretty funny. He reminds me of Jemaine from Flight of the Conchords. Do you know is he a Kiwi or Aussie?
pjcappaert 9 months ago
Goodbye X-Y Controller-sidechaining, hello easy mixer channel-sidechaining!
SkylerOfficial 1 year ago
Hey, novice here. What genres is sidekicking generally used for besides Trance/Dance? Are there common or maybe even quirky but cool uses for sidechaining other than for making synths pump?
Darkozl 1 year ago
@Darkozl - Ducking music levels under a voice-over on videos. Subtle (non-pumping) sidechain can open up a mix. There is a point at which you can't hear it working but the mix sounds better. Also sidechaining is a generic term, it doesn't mean 'compression'. It can be any sidechain signal controlling any effect (that accepts sidechains). Possibilities are limitless.
imageline 1 year ago
@imageline Thanks for the quick and informative response. Very help tut as well.
Darkozl 1 year ago
@Darkozl I like to sidechain reeverb on a snare when I make house.
Goldbloodeddragon 1 year ago
1:14 tat was funny :D
astroanu2004 1 year ago
Clear, simple & short tutorial as always :)! Good job, thanks alot!
Mjnkhr 1 year ago
HI I USED TO CONNECT MY CONTROLLER TO FL 9 BUT NOW I DOESNT MAKE ANY PITCH BENDINGS I TRIED EVERYTHING I EVEN RESETED FL STUDIO IN CASE I MESSED THINGS UP BUT IT DIDNT FIX IT , THE MIDI IN LIGHT SIGNAL FROM FL TURNS ON WHEN I MOVE THE PITCH WHEEL BUT THE KNOB IN THE WRAPPER WONT MOVE AT ALL ...
HELLRAISER657 1 year ago
@HELLRAISER657 - Sounds like something you should ask in our techsupport forum - Google "Image-Line technical support"
imageline 1 year ago
@HELLRAISER657 It doesn't work when caps lock is on.
SillyEagle1992 1 year ago
@SillyEagle1992 THANKS MAN IT WAS DRIVING ME CRAZY !!!
HELLRAISER657 1 year ago
@HELLRAISER657 Always glad to help. :D
SillyEagle1992 1 year ago
how do u record sidechaining when recording becuase the sidechain lasts for a couple of seconds then ends
BeanieBeat 1 year ago
@BeanieBeat - It sounds like you are in pattern mode, switch to song mode and lay out your patterns in the Playlist.
imageline 1 year ago
Ok. So what if i want to link the kick to a pad with effects such as reverb and delay, but i only want the kick to be sent through the compressor?
yankees529 1 year ago
@yankees529 - Use several Mixer tracks.
imageline 1 year ago
If you need to sidechain many synths with only one kick, do you need to ad one limiter/compressor) on each mixer track? Isn't the peak controller easier in that case?
verack22 1 year ago
very informative. Helped me a lot.
Thx
jamonit1000 1 year ago
There is a problem! if you mute the kick, everything goes back to its normal position. unless there is a solution for that!
atheistonly 1 year ago
For some reason I don't have the option to sidechain to the track only...
I don't want to hear the kicks in my song....any help?
babiinene 1 year ago
@babiinene - What version of FL Studio are you using? Sidechains were introduced in version 9.
imageline 1 year ago
@imageline
I"m using version 9
babiinene 1 year ago
Cool. But i just use Sidekick4 xD
elektrowhore 1 year ago
Same thing here!
i also want the same thing that zirco had in his demo song, but i don't know how
but this tutorial has been really helpfull!
DJGlennProductions 1 year ago
Hi Imageline ,
I just wondered is it not possible to mute the kick track but still hear the effect ive tried this and it doesn't work i tried muting the kick track and putting the volume of the kick track to 0db but the effect dissapears , this is so i have a sidechain kick track in my tracks which is not heard and a different kick to use so i can still have the ducking effect whilst a kick is not playing. Thanks
Arnieuk1 1 year ago
@Arnieuk1 I'm getting the same problem. zircon's demo song has the feature but it doesn't seem to work in my songs.
Elementerials 1 year ago
@Elementerials
Hi Mate
Apparently you have to disable the kick send to the master and it will work , because the kick won't be heard
Arnieuk1 1 year ago
@Arnieuk1 wont work. the phase effect disappears
Elementerials 1 year ago
@Elementerials have you turned the send level down?
Arnieuk1 1 year ago
@Arnieuk1 - Deselect the send to master of the Kicks Mixer track. As noted in the video.
imageline 1 year ago
@Arnieuk1
It'd be SOOOO much easier if they had PreFader and PostFader effect sends... Really a shame they don't have pre and post sends... It's nice to send 100% of the effect with the click of a button. Ugh.
jrhager84 1 year ago
And this is why i chose FL studio.......
I bloody love you Image-line !
NOMADLEON 1 year ago
i used the peak controller method to side-chain for at least two years, and in the past two or three months i've almost exclusively used this method. it's much more direct, precise, it has fewer latency issues -- and it is WAY MORE VISUAL, you can actually SEE the reduction caused by the side-chain, which i love.
i still use the peak controller, but mostly only to control delays and reverbs or any plugins aside from the fruity limiter.
great tutorial.
i encourage you all to use this method!
mp3dmp3d 1 year ago
very very well explained!! thanks bunch!
djtechno2010 1 year ago
awesome,now i am use limiter for the sidechain more function :) and..
jezter2k 1 year ago
killer
arjunkaul 1 year ago
and a gate bonus :))) Damn, that one was funny :D good work done here, Guru!
blabla12331 1 year ago
thankkk u sooo muchh
yankees529 1 year ago
How's the use of it with VST's with sidechain?
gustavoturm 1 year ago
How's the use of it with VST's with sidechain?
gustavoturm 1 year ago
awesome this is great =)
blubbergubberblubber 2 years ago 2
can u make a video about the same but with compresor?
subhanero92 2 years ago
This is so helpful :D Keep`em coming :D
0D0J0P0B0 2 years ago
thnx
XZibittt 2 years ago
The peak controller is more easy.
atalis1 2 years ago 5
It is easy and I use it a lot. Don't know about 'more' easy tho. However note the peak-controller may not catch the fastest transients while the Fruity Limiter (compressor section) always will. The compressor is faster and more flexible.
imageline 2 years ago
oh my, this is waaaaay easier than the way ive been doing it.
kloudtana 2 years ago 15