Tesla Radiant Energy, highest energy gain from the Bifilar spiral coil

[stoni2041]

Loop Antenna + Crystal Radio Receiver w/ Self Powered Transistor Amp + Tesla Air Cavitation Radiant Energy Generator = Radiant Energy Generator ... Do Not use a frequency that is being broadcast on....change out the speaker for the spark gap. BE CAREFUL have fun

[SuperRorylewis]

can you show me a diagram of how to make it??? Please

[TheOldScientist]

@SuperRorylewis All details are on my website under tutorial. The 1/4 wave coil is 1/4 of the length of the full wave coil, simple. All other components are explained from earlier experiments. Watch them from the beginning for a recap.

[pleasanthacking]

dude... thats awesome what you do! i have some questions.

would it be possible to instead of tapping into the ground using another coil of some sort? rationale for it would be quite obvioius. using this device to power controlled flight :)

tesla was only vegetarian (he used to drink milk) im vegan (plant based only) and i can really tell the fog drops from the mind when being veg*

have you considered doing so? if so i have a page to get you started - google "positive plant based promos"

[TheOldScientist]

@pleasanthacking Hello, I did abandon ground connection in this test. And Yes, there are other coil contstructions where even more energy can be extracted. But it would also mean to energize the Bi-polar Tesla coil different. I have planned this Year to show that.

[pleasanthacking]

@TheOldScientist i wish you well on your journey :) I can only hope that you wont lose self in it, and wont feed the first wolf, so it wont win. google - "cherokee two wolves legend" although some things move forward rapidly, some stay the same :)

[MattBlytheTheOne]

May I ask how you are capturing/receiving the radiant energy? Or are you just powering the Tesla coil?

[TheOldScientist]

@MattBlytheTheOne Hello, if you want a simple answer then "no". A Tesla coil is not responsible. Is a propeller on a Wind Turbine responsible for the energy you harness through the sun? Please watch all my radiant energy videos. They will guide you through the process.

[MattBlytheTheOne]

@TheOldScientist hi OK but it looks like you are powering the Tesla coil then picking off the energy with bifilar wound coils and using that to power the flourescent lights? I was just wondering where the energy for the coils is coming from? Thanks :)

[TheOldScientist]

@MattBlytheTheOne As any so called Free energy devices. Form the field around an excited system. The principle is always the same. Tune in to the frequency of an excited system. Smash energy waves against each other. Either magnetic or electric. Like in a bath tub. Move the water with both your hands and against each other in the water. You create a counter running wave which shoots up in the middle when they meet each other. There you capture the energy. The principle is simple.

[TheOldScientist]

@TheOldScientist Execution sometimes is more difficult because the way to capture the energy has it's problems. However there are now so many examples how to avoid the downside of these problems like EMF. The Bifilar Tesla spiral coil is one example. The Rodin coil is another. I will show that in another video.

[MattBlytheTheOne]

@TheOldScientist OK I understand radiant energy and resonance! Something is exciting the circuit yes? Bifilar coils are unique because they cancel out magnetic interfearence and back EMF and produce a cleaner standing wave. They are also safer (low voltage at the circumference, high voltage at the center). What is exciting your system (antenna, wind turbine, mains?) and do you believe you are getting radiant energy added to it to produce overunity?

[TheOldScientist]

@MattBlytheTheOne Be sceptical as I am. You do not need to believe anything. Just test the things and grasp the concept. Nothing else. Once you have done it yourself then you can start to believe. However don't underestimate the power of yourself. Your will and believe has more power then you think. Your thought makes thinks happen. I have done so and did set myself a time when to achieve things. Everything so far did pan out.

[MattBlytheTheOne]

@TheOldScientist OK that is a great answer and not the one I was expecting. Are you suggesting you ARE receiving purely free radiant energy without a power source?? I believe it s possible.... and I believe in the power of the mind. I also like to see FACTS.... just tell me straight and I will give you the benefit of the doubt :P lol

[TheOldScientist]

@MattBlytheTheOne There are many systems which can capture just the environment energy but you need always something to harness it. I excite systems, in my example with high voltage and high frequency but with very little effort. Just enough to overcome the threshold. the main think about many of so called free energy or over unity systems is you need to overcome the critical threshold. some need little and other need lots of KW of energy.

[MattBlytheTheOne]

@TheOldScientist thanks, overunity is not really overunity which is of course impossible, it just means that in a closed system, the system is drawing energy from somewhere other than itself... whether it is atmospere, the aether, magnets or zero point.... there are no TOTALLY closed systems, everything is affected by everything else. Tapping into the something else is the important part. Namaste :)

[TheOldScientist]

@MattBlytheTheOne Matt, you are spot on. Now we can start to work on it. ;-)

[MattBlytheTheOne]

great vid love it, what is the music? :)

[ufopolitics]

Love your set-up...and your patience...

May I suggest to:

1-Sharpen the points of the Spark Carbon bars, to obtain a "cleaner" spark.

2-Use an Oscillator Circuit that renders High Peaks and short intervals.

3- Then enclose the spark electrodes within a plexiglass cylinder and two metal (copper) plates or cylinders surrounding the spark, Insulated and preferably adjustable forward-backwards inside cylinder, where you will connect the main wires to get cold electricity...

I want to do that also...

[TheOldScientist]

@ufopolitics I struggle with clean sparks and the 1B22 switches soft. the tungsten rod is not sharp enough and seams to draw energy rather then to release. No real control with them. My series spark gap does work only for a short time until the copper oxidises. I contacted some power equipment companies but there components need a couple of 1000 Amps to be used for power relay stations, no good.

[TheOldScientist]

@ufopolitics I have a couple of carbon brushes I will use for a new spark gap design. Can you get in touch with me via email on my contact form on my website under personal.

[GraffixWB]

After reading alot of Dr. Meyls work, he says that the recieving AND transmitting coils should both be pancake style. try a pancake style sec transmitting and prim recieving(the ones attached to the spherical electrodes).

[TheOldScientist]

@GraffixWB hello, Meyl is working on a different subject, the transmission of energy. I covered the same subject with my wireless transmitter. My approach here is different. I want to harness energy from the field. A normal pancacke design does experience emf and is also a transmitter. Only the Bi-Filar coil does avoid both of it and is merely an resistor antenna without resonating properties. With the 1/4 wave in between I synchronise the energy flow as you see in the result. Test it yourself.

[bbojbboj]

@TheOldScientist Hello. I very much enjoj your work. Would you mind explaining what kind of energy from the field do you intend to collect? Particles, waves or something else?

[TheOldScientist]

@bbojbboj hello, it is vibrational energy, you might also call it Zero point energy. Professor Mehl is talking about Neutrinos, wave particles. When you excite the field and tune in to the vibration you gain energy. This energy keeps all mater together. Why does an electron not stop spinning around an Atom core. Where does that energy come from? Or the Earth around the Sun. It is like sun, wind or water power. You harness the energy, you never create or destroy it. It is always there.

[bbojbboj]

@TheOldScientist I ask because you said that only D Smith talked about the resonant coils.

I know he didn't show the working circuit but as I understend Him - he used resonant coils for two purposes.

1. eficiency (E in ) and when the coil is in resonance it collects this vibration if it is of the same f or multiple.

So you excite the field with the same f of this vibration

[TheOldScientist]

@bbojbboj Hello, I have to admin I was inspired by Don Smith but did not achieve the results with the loose coupled coils. Also the Bipolar Tesla coil has properties a normal coil does not have. It is not simple to resonate to a frequency. That would not give you more energy out of the field. You simply exchange what you have. Having said that I have now achieved similar results as claimed with loose coupling. He made have had a point but he was a bad presenter and secrecy did not help either.

[TheOldScientist]

@GraffixWB Professorial Meyls made interesting discoveries which did encourage me to work in the dielectric field of a Tesla coil. I have his links on my website. His German lecture is more detailed and better presented than English one I am afraid. I still have a hard time to buy the neutrino story which is supposed to expand the Earth. It sound like the movie 2012 were the sun's Neutrino burst did again create the big flood on the Earth.

[godzillapimpin32]

Awesome work !!! 1000000 thumbs up. Whats the name of the music? its just as awesome.

[TheOldScientist]

@godzillapimpin32 Thanks,

it is from the "Wingmakers". You can find the details and links on my website under esoteric.

[sn1pe352]

such a beautiful setup, very professional and simplistic

"simplicity is the ultimate sophistication"-leonardo da vinci

keep up the great work thomas, love your style

[TheOldScientist]

It is a way to harness power. Goal here is to get out more of the field compared to the source. One sound fork will resonate with 1000 sound forks in the same room increasing the volume The wireless transfer requires a different set-up which I covered in the first phase already.

[blackbrolly]

Is the goal of this experiment to eventually deliver power wirelessly?