MY HANDMADE STAINLESS TRENCHKNIFE

[londonTown1989]

wow thats very nice great job on the knuckleduster i dont want to no how much fileing went into this :) 

[ARCEYE78]

@londonTown1989 Cheers mate,never again,killed the file too X)

[lacerta69]

holy shit! you weren't kidding! i wouldn't want to run into you in a dark alley lol.

very good work though, nice and clean.

[ARCEYE78]

@lacerta69 Cheers mate,although this never comes out of my house,just too risky for many reasons :)

[Mr5point56]

HOLY CRAP! that is amazing great work!

[ARCEYE78]

@Mr5point56 X) Thankyou very much :)

[ARCEYE78]

@1987Airgunner Thankyou very much,yes im a welder/fabricator and especially love to use a TIG for real fine welding,i really wish i had a lathe & mill & learn to produce technical stuff and hopefully one day i will once i have mouse proofed the workshop,yep the feckers had a shite n piss party in there :(,not nice but it will be a fully operational workshop latter this year once i line it with 5mm galv mesh :)

[tatorsal]

Freakin sweet, carry you carry it?

[MrNightshade69]

very nice spray paint it

im just getting into knife making

[ARCEYE78]

@MrNightshade69 cheers mate but this is not to be painted as its made from 316 stainless steel which will never rust,this final brushed finish is perfect imo,although mirror finish is beautiful but takes more work,good luck with yours :)

[derstrumer88]

that turned out really nice

[ARCEYE78]

@derstrumer88 Thankyou :)

[7689568]

awesome work!

[ARCEYE78]

@7689568 Thankyou :)

[n1ckf0r3m4n]

wear did u get the blade?

[ARCEYE78]

@n1ckf0r3m4n It was a basic stainless blade from greece with a paracord wound handle.

[n1ckf0r3m4n]

@ARCEYE78 thanks i wouldnt mind tryin to make one like it

[ARCEYE78]

@SnyperMac i bet but im sure my files would dissagree X) this was hard enough to work with :)

[SnyperMac]

@ARCEYE78 yea a grinder is somewhat important

[SnyperMac]

@SnyperMac gorgeous knife btw

[funnyrees]

nice job!!!!

[ARCEYE78]

@funnyrees thanks :)

[ArtistBlade1972]

Excellent job on the knife, but why did you choose a low carbon stainless? Is it just for decorative purposes?

[ARCEYE78]

@ArtistBlade1972 Thankyou and yes purely for decorative reasons as i love stainless steel and i happened to have a nice lump craving attention :)

[ArtistBlade1972]

@ARCEYE78 Cool :) Don't try forging it though because it'll work you to death..

[ARCEYE78]

@ArtistBlade1972 i bet...maybe one day i'll make a forge as im keen to try it, i have a youtube friend who has invited me to come over to use his forge,i will take him up on that offer soon X)

[ArtistBlade1972]

@ARCEYE78 Oh you should definitely make one. You will become addicted. It's very easy to get started forging... The possibilities are endless also. Check out some of my vids..

[znile1]

Very nice would be really cool if u made the knife like stiletto making the knife part of the knuckle duster hidden.

[ARCEYE78]

@znile1 thankyou, i was thinking of making the blade to fold into the duster but the project would of dragged out too much for me and i am very limited with tools, just if i had a mill then many more things could be made :)

[BriFryeProductions]

That knife is amazing that its handmade.

[ARCEYE78]

@BriFryeProductions thankyou :)

[hatsan71]

opinion of my son Adam is : awesome knife!! hi love stuff like that!!

[ARCEYE78]

@hatsan71 thanks.... he has good taste X) 

[hatsan38]

oh man!! amazing knife!!! one of my is homemade 10 inch full steel!! great gadget for throwing!!

[ARCEYE78]

@hatsan38 thanks very much :) you should get some vids up of yours...its good to share X)

[hatsan38]

@ARCEYE78 i will ! but my nives still in poland !! is to difficult take the stuff like that on the aircraft xD!!

[ARCEYE78]

@hatsan38 mmmm yes have to declare em and put em in non hand luggage :)

[hatsan38]

@ARCEYE78 yes mate i know about them :) last time have a litlle problem for my scope in the hand lugage ! but never for riles in my bag :))

[MrToflyy]

i like the ideo of the phesant hunting and wht accent do u speak with

[ARCEYE78]

@MrToflyy thanks im a pure breed Essex boy >:)

[adamr2yeah]

this is a compliment.

it relly looks like its from a shop but i sooo know it isnt. i believe u soooo much that u made it.

4 a next homemade thing maybe you culd make if u wanted 2 could be a katana(samurai sword).

[ARCEYE78]

@adamr2yeah thanks adam i appreciate it, well i may make one as it is one of my fav weapons but no time at the mo, im trying to purswade myself to build a full size road legal sand buggy but doing homework on it first :)

[MrToflyy]

thats not hand made bitch

[ARCEYE78]

@MrToflyy LOL!! so jealous, yeah i used my cock to push out the holes and polished it with my chocolate starfish, you are such a loser,get back to your lego dimwitt XD

[MrToflyy]

@ARCEYE78 how s it hand made it looks fake jus sayin

[ARCEYE78]

@MrToflyy well i used my hands to make it LOL, im assuming your not 19 as your channel states as your comments are sounding like someone much much younger,you would go further in life by avoiding comments like your first on here, i like to think the pics at the end explain it all.

[TamrynRimfire]

Never seen a Stainless steel one before looks excellent weldone m8 5*

[ARCEYE78]

@TamrynRimfire thanks Tamryn, i have a thing for stainless steel, love the stuff :)

[BekkerOnGunsNHunting]

Dude you made that...Thats some awsome work awsome job,,,

[ARCEYE78]

@BekkerOnGunsNHunting thankyou Bekker, yep all by my hands X) oh and some tools:)

[butaangas]

Awsome man! Really good job on the stainless steel stuff. Really, really hard to work with for sure! Job well done mate! Did you see my 25mm aluminium knuckleduster yet?

[ARCEYE78]

thanks very much butaagas, i'll check it out now :)

[butaangas]

Awsome man! Really good job on the stainless steel stuff. Really, really hard to work with for sure! Job well done mate! Did you see my 25mm aluminium knuckleduster yet?

[dnahoghunter]

Nice work!!! I've never played with stainless. Don't know if I'ld have the tools. Did you make the blade too or did I hear you say that you welded it in?

5*s

[ARCEYE78]

thanks D no the blade was from a knife i got from greece but looked right so yes i welded it in :), im building a stainless replica pistol with a bayonette under the double barrel and that blade has come out very nice, not sure when it will be finished as im building shotgun targets at the moment including a Texas star for my practical shotty club as their targets are very poor so i thought i'll do em some proper ones, if you have any vids of stuff ya made send em to me :)

[dnahoghunter]

@ARCEYE78 that would be too many vids. I'm gonna be doing some work to a Black Buck Antler/Horn that I will tape.

[ARCEYE78]

yeah can be a pain video'ing whilst working, look forward to it .

[llBassmanll]

amazing job! way better than any factory's machines can do.

[ARCEYE78]

cheers bassman i really appreciate your comment and thanks for watching:)

[katanaswordmaster]

thats very nice, well done. :)

[ARCEYE78]

thanks ksm glad ya liked it :)

[reasoning777]

An extremely nice and successful project there. A lot of effort is evident in the finished item, especially the way you managed to incorporate the blade so well. A passion for the material reflects in the quality of any project, Nice one !! 5X5Fav&Save !

[ARCEYE78]

thanks r777 im very glad you liked it :)

[AirgunTester]

Excellent piece indeed. Do you think you may need to put a couple of cross-pins in to hold the blade? Can you make me a video cam scope holder?!!!!!! ;)

[ARCEYE78]

thanks mate...the blade is fully welded into the handle/duster so wont be going nowhere :) sorry i have not got back to you on the mount yet, i'll send you my details on the weekend:)

talk soon.

[jam3z1000]

realy nice m8 i got a trench blade profesionaly made and yours is just as well made well done

[Olliedfox]

wow that things niiiiice...

perfection.

[cressy7]

nice job 5*

[Schnmnn]

Beeindrückende saubere Arbeit! Sehr gut!!!

[ARCEYE78]

Dank sehr viel Schnmnn.

[Jordenkl]

nice job !

[druzz82]

Respekt, gute Arbeit!

[ARCEYE78]

Danke druzz82 :)

[MacsCanfly]

wow man you finaly made it wow its awesome very cool

[ARCEYE78]

thanks alot Mac, im very proud of it :)

[MacsCanfly]

welcome, oh i don't mean this in a mad way but when i say macscanfly i mean mac as in macintosh computers can fly!, my name is josh.

[ARCEYE78]

LOL!! yeah dont worry......thats what they all say XD

[assassin616]

nice little knife phil 5*

[ARCEYE78]

thanks james, its sooooo shiny XD

[WeaponCollector]

Beautiful mate, makes me jealous, lol, i don't really have the tools for Steel, maybe one day,

looks great, and must have took a long time to make.

5 stars and faved,

Mike.

[ARCEYE78]

Thanks mike your comment really means alot:)as i said months ago seeing your vids reminded me of my unfinished trench knife & gave me the motivation to get it finished, to be honest i didn't use any special tools,just

like yourself i chain drilled the holes, filed them smooth and just used a grinder with a flap disk to smooth and shape, just takes a lot more effort, that fileing was a nightmare lol!! really done my hands in as im not used to it :)

i have a 2 finger to upload u may like too:)

[WeaponCollector]

looking forward to seeing that too mate.