How-to vid on cutting off roof's & clip's off your model cars

[Fsamchez14]

im 15, all i did was chop the top off, and cut about a centemeter off, and just glued it with super glue lol(:

[racerdbo]

Hey i just got my second model car its a 1932 ford 5 window coupe and i just cut out the sunroof thingy and i got an airbrush today cuz its christmas. oh and some paint soo i CANT WAIT TO PAINT but i cant cause its waay to cold up here in washington soo yea thanks for this vid it helped me ALOT on the cutting

[haffiti2000]

I think the subject car would have look great with a 2 tone paint job like black and blue with some daytons

[805dloc]

hey bro in this video i learned alo but you were saying to do the flip nose you have to go threw alot youthink you can make a video on how you do it thnx

[MrJUNE224]

I Have a trivia question the most of ur model fan don't know. Back in the days when u bought a model it came with free glue with all kit. The reason not now cause parent where finding car model in the box open but not built. The kids all over U.S.A where sniffing the glue to get high. They complain and that is why now u need to buy ur own. The glue were stronger than now. Today u have is junk. I once stuck my finger together and my dad had to help me to separated them.. lol I LOVE THE 80

[MrJUNE224]

LMAO..U kill me with the glasses. I used to built model as a kid. I love it. now 45 i got back into it cause i gotten hurt at work and was bored. I'm was glad to see that ur a old head like me.. I'm not as good as you but i'm learning. Jimmy the reason I laugh was i notice I couldn't see the number on the manual. especially that lindberg Comp. . Revell manual is a lot better. I notice i have gotten blind ,Old age crap. I went to the Rite aid and bought me some reading glasses. VIEJO PERO PALANTE

[micartecca]

Hey loved your work! check out one of my creations! tell me what you think! 1966 Oldsmobile Cutlass 442

[micartecca]

Hey loved your work! check out one of my creations! tell me what you think! 1966 

[TheMRrocker7]

thumbs up for al of the lights in the background good song

[MrMm713]

@fastjimmy71, have you ever used sewing thread to cut up your models? I had found a vid on here showing that, I used that method, using sewing thread to cut up your models is A LOT easier, and faster, sewing thread will cut a lot smaller lines within minutes.

[lukeyboy900]

Jimmy do you know how to paint the exhaust burn on exhaust pipes n manifolds?

[Clonesniper225]

where do u get the big wheels for your models

[mackadoeish711]

Ay bro where can I watch or get tips to do the carpet. I have the model masters powder but when I try to glue it, it just clumps

[2008ryanb]

gotta be real carefull with the exacto knives.. i cant tell you how many times a sliced my fingers open trying to cut pars off trees and cut bodies

[bad65stang]

@2008ryanb ikr? i cut myself at least 3 times for every model...and i bleed from my hands ALOT lol...its more of a mess than a pain

[oneslowride]

I got the truck for 20 then picked up the Van body from Flintstone for 10 at different times. Hope you got a sweet deal on it1

[takumifujiwara124]

@evil2392 man now i need the inspiration to finish my toyota estima because of the frikin neon wiring that keeps on messing up. btw thx for that!



[takumifujiwara124]

@evil2392 first of all you will need speaker wires, a soldering iron a switch and two watch batteries. Take your soldering iron and burn a hole in the main headlight and make sure that the hole is big enough to make an led light fit do this in all the light buckets that came with the kit. Then wire the whole thing up and you're done!

[hillbillyrockstar217]

sweet. hey im chopping the top off my 32 ford coupe. hope it comes out good. cant wait to see more on the red wagon. Peace!

[stig800]

great tip very good video.nice the pickup truck.

[carbonfootprintmyass]

thanks for answering my question jimmy much apprieciated :)

[TheRocketSilo]

thanks for the tips !, I'm a beginner but I have learned a TON from the advanced guys like Fastjimmy, sharing the knowledge is what it's all about.

[TheSlick1962]

words of wisdome bro way to inspire jimmy you da man

[MrWildworld64]

thanks for the how to vid keep up the good work

[CTspeedshop]

Great Vid Brother!!! Great Tips!!!

[ripgabby08]

amen brother on jumping in on the custom work !!! jump right in !!! great tip jimmy

[pcsman111]

Great video Jimmy learned a lot always wanted to know how that was done and you have answered that for me. Thanks and "peace chicken grease" to you. You have me saying that during the day and my wife still looks at me funny.

[cwazmann1]

Awesome tip bro on chopping off the top. Your tip just helped me find an easier way to make convertibles. I never thought of scoring the roof, but it's true, it makes for a cleaner cut. What I did to my merc the other day I almost murdered it...lol!! I do it the hard way usually, cutting off the roof with clippers then sand the edges even afterwards. Now I know. Keep up the awesome work, peace!!!

[railroading29]

THANKS FOR THE HOW TO VIDEO JIMMY

[TubeBkg]

Hey Jimmy, thanks for the vid man. Still want to see your tube work bro. You do a kick-ass roll cage!

Oh, by the way, you're right about age just being a number. Unfortunately, in my case, I can't count that high! LOL

Peace Bro.

[MrDaveyboy1212]

whats up fastjimmy71... im still trying to figur out how to put word intros on my videos, can you give me ideas on that? thanx ,, catch u on the rebound..

[FuKnsHytUp]

That's tight jimmy thanks for the tip ..but hey I would love to learn how to make a rotating stand like the one u got ur car on.

[MrDaveyboy1212]

what i would like to know fastjimmy71, is where did u get or how did u make that car turntable? inquireing minds would like to know.. lol.. Thanx.

[xfiles1952]

thank you for the great tip this will be real handy for when i chop the roof on one of my models. and where did you get that thin masking tape

[primativemodelling]

Great vid dude......awwwww shit i just cut my finger off with an Exacto knife !

[StuckiiProductions]

i inboxed you :) and great video mate

[MRlowrider305]

Nice video jimmy!!!!Thanks for the info

[damncranky666]

Great how-to vid! You are totally on fire, man. Loved it. I think that van body is going to turn out sweet. It's a great canvas for some multi-colored paint job.

[romero09x3]

Awsome vid man. Ive been waiting for one of you guys to do one. Kutgw!!

[nboldman]

Awesome. I think I will do this on the up coming mustang Mach 1 pro stock or pro sportsman good how too

[NorthernWolfman]

awesome how to Jimmy, hope to use it on one of my builds in the future even though i got a looong way to go..peace man