MAGPUL UBR Stock, Install

[jetfuel545]

I would say just read the instructions. You forgot the important part of tightening the entry receiver extension with an AR armors wrench. Not going to get that tight enough by hand. You might want to edit that in

[brdalbright]

could you tell me how you painted your rifle like what kind of paint did you use ect ect loooks very cool thank you take care

[Spetsnaz1220]

So if it comes with the buffer tube? you can put it on a full stock m4/m16?

[Mustangdriver113X]

Help I'm new to assort and I got a buffer tube That I need to twist on to my gun but there is a cap at the end that blocks the threads how do I get it off

[brattfaret]

Does this fit the King Arms colt M4A1 GBB rifle?

[hamcheesesalami]

@brattfaret this is for real guns, not toys

[Ascotyforfood]

@hamcheesesalami Will fit both

[Vectar84]

Good video. But one question: buffer tube for UBR have mil-spec or comercial-spec diameter?

[1artgtr]

Can I use my single tactical sling mount with this stock? I like the stock and would buy one, only if I can use my sling on my mount. OK Thanks and your video was great and very informative. Thanks again Artgtr

[PackPractical]

@1artgtr Yes you can if it uses a swivel QD

[kevo1264]

Does a buffer spring come with the stock?

[PackPractical]

@kevo1264 no

[klextacy]

Yet another great video, Tim. Looks like a great piece of gear!

[Demo7IIRider]

hey i got a mesa tactical high-tube stock kit, and i want to install a ubr stock. i know this may seem like a noobish question but is the detent spring important for the assembly? or will it just go on any AR15 based receiver?

[CarteRSqueezE]

does the ubr stock still come with the buffer tube?

[PackPractical]

@CarteRSqueezE yes

[Ultim8Soldier]

Git r' done!!!

[bangbang387]

how to put the battery into it?

[jebustheone]

In my personal opinion these are great for heavier uppers. I'm currently using one on my 'compact dmr' type noveske ss 16 middy and it balances really well with the heavy barrel.

I would also like to see this general idea used on the cav-15 (for whoever buys the rights to them that is)

[3mealsaday]

personally, I do not like these. I had on for two months then sold it, bought a Vltor, and have never been happier. It was just too bulky.

[Robalose]

Jesus christ how is that massive thing "All you had" lol

[Vietboy1st]

i like ctr stock than any other stock from magpul. Also i am not a magpul accessories whore lol.

[M3chan1calAP3]

is it just me or does that gun look green

[PackPractical]

@M3chan1calAP3 yes the gun lower receiver was painted

[piggykrap]

A note to all airsofters.  This is NOT an airsoft part. Magpul airsoft parts will have PTS somewhere in the name.

[geogre324]

can u switch it with a crane stock and it still hold the battery

[Vietboy1st]

@geogre324 it's real stock for fire arm kids... not for airsoft.. jesus christ..

[YouJustGotNoscoped13]

TIMMY <33333333

[PariahOfTheKOHLM]

My only reservation to buying one of these for my AR is that it looks heavy. How has it been using this badboy? I love my CTR to death, but with my bushy beard I am looking for something that might not rip my face off in operation. Great video and any comment is appreciated, PackPractical! I pray GOD bless you and yours.

[sabrewulf2099]

Should the take down pin be in or out when you put the retainer spring back in?

[Archangel292]

screwdriver win

[bloodangelusn]

the video review is great but for the love of all things "hole-y" we can't see things on a dark item if you don't have sufficient lighting. angle-ing the item helps but not enough; a light source behind or to the side of the camera helps tons.

[Antiworld23]

Can someone expalin why this piece of plastic is $265?

[kagamiismywaifu]

@Antiworld23 The quality of polymer, the consistent cheekweld, the sleek smooth lines of the stock, the excellent customer support Magpul has.

This is why its worth $265.

[Antiworld23]

@kagamiismywaifu

Well, you convinced me, I bought one a week ago. But I only paid $250 :)

[vash241987]

Geez I'm starting to feel that the BRD is slowing coming on to me. I just got a stag M3L on layaway with magpul front/rear MBUS. Now I have a YHM specter FF handguard and lo-pro GB coming in on monday. Now I want 5 pmags and a AFG.... now I want to change my stock :P...need to win the lottery.

[isaac19delta]

Magpul puts a lot of thought into making money ;) And they do a damn good job of it. Capitalism is Boss!!!

[silentlightningdice]

Pack,

What was on the bolt release that extended down to the trigger guard? It looked like a magpul BAD for southpaws, and being left-handed myself, I'm very interested if such a device exists.

Thanx

[PackPractical]

@silentlightningdice it is made by a company called RB Precision. It is a quasi BAD, but its about 4-5 yrs old

[njbrinley]

Whats the QD swivel? I just bought a ASAP and UBR yesterday and it was a bit of a rude surprise when i was installing them and found out the ASAP wont work with it...

[GeneralMazaki]

I guess you didn't really study pictures of rifles equipped with these things very well, huh?

[leeindy]

can you use the asap sling atachment with this stock?

[ForTehNguyen]

you cant use the ASAP on the UBR, it uses the A2 style mounting. ASAP requires the castle nut style of installation. But you can put a QD swivel and attach an ASAP to that

[jacksoni349]

5 stars for mega screwdriver!

[toymachine87]

great video dude and thanks for the easy instructions, 5 Stars

[DrTacTiC00L]

nice screw driver

[punumper]

Nice. Thanks for the video. These are quite a bit easier to install than the Magpul M93 series. I'm looking forward to the arrival of my FDE one this week.

[arbar98]

holy crap thats a huge freakin screw driver! Thats like wht you use to fix cars!! ? lol

[arbar98]

ooooooh ptw...

[geakoner]

Great video, thanks for the tutorial!

I'm anxiously awaiting the arrival of a black UBR now, and am tempted to go and purchase a FDE one for a future build as well, lol.

Cheers.

[SCCrusaders]

Can this MagPul stock hold a Lipo battery or no?

[PackPractical]

Lipo?

[SCCrusaders]

yes Litium pilomer (how ever you spell it)

[Flipnoy808]

@PackPractical

haha Li-poly is what he's trying to say...

he's refering to the airsoft version of this stock

but obviously this version is real steel

[CCShamrock13C]

@PackPractical

it's an airsoft thing

[TheTeamIntervention]

@PackPractical he thinks this is an airsoft gun

[inapinkhotel]

@PackPractical He's talking about airsoft. :p

[sk8erdude8804]

@PackPractical this kid thought it was a airsoft gun 

[CheytacOps]

@PackPractical i think he meant for airsoft guns cuz magpul makes airsoft products as well so he probably mistakened this video for airsoft guns insted of the real thing.

[JulioCHernandez]

This vid is made for Real guns, not toy airsoft guns.

check AirsoftGI and ask them if a Lipo battery fits in ur toy gun

[xxthehuskycaboosexx]

@JulioCHernandez as an avid airsoft i really disagree with your quote saying its a toy gun, its not, the army, and police to airsoft to train

[ostmash]

@SCCrusaders its not an airsoft

[DECICIVETOAST]

@SCCrusaders not airsoft dude,

[Archangel292]

@SCCrusaders this isn't airsoft lol.

[RonMarsala23]

@SCCrusaders lol i thought this was airsoft 2

[LWRCftw]

@SCCrusaders erm.. this is the real thing.

[RCDC93]

@SCCrusaders lol your an idiot this is a real gun not a pussy airsoft gun

[DragonTail9152]

@SCCrusaders it's not airsoft. on an airsoft ubr stock, you can put in a king arms 11.1 lipoly mini in the buffer tube

[jackl45]

@SCCrusaders hahah he doesnt airsoft i do the answer is yes it can

[stalker117]

@SCCrusaders

This is a video for a Real Steel installation, not an Airsoft one.

[Vietboy1st]

@SCCrusaders These are for real fire arm not airsoft kid..

[blackhatch46]

@SCCrusaders its a real rifle not an airsoft gun....

[Robalose]

@SCCrusaders This Is not airsoft.

[jebustheone]

@SCCrusaders Lipo=cr123?

[GeneralMazaki]

@SCCrusaders

Won't fit on an airsoft gun. Buy the airsoft version.

[TeamDeathStalker]

@SCCrusaders this is a real gun not an airsoft gun

[satan15107291]

Sweet AR you got there. Is that the MOE handguard too?

[PackPractical]

no, that is just a tube from yankee hill machine.

[trykp]

I miss the pre-production run that came in the box in the video. I just got some of the new production ones and the texture is a little different. more resembling the pmags. still good though.

also, the new production UBRs don't come with the extra cheek piece incase you wanted to use the sleeker one :p.

have extra ubr if anyone wants just msg me.

[taurran]

Awesome stock. Wish I could find one around here in green.

[izzyeco]

UBR is an extremely heavy duty tight stock. Balances out a Colt hbar perfectly. However, the ACS is half the weight for my light Bushmaster. The cheek rest on the ACS is perfect!!!! I highly recommend both of these stocks.

[Xlife93]

i like the stock but too much money

[m16a2m4]

when i see guns fired with this stock and with the massadas/ ACRs with this stock if u look carefully it looks like it rocks because of the gap and the stock being attached below the buffer tube i maybe wrong i love the stock and magpul :) just my two pence

[GeneralMazaki]

The whole point of the design is that it doesn't wobble. And by God, it sure as hell doesn't. The UBR is just as solid feeling as ANY solid stock.

[m16a2m4]

i didnt mean it like that i ment the rifle its installed on rotates on the axis of the end of the buffer tube when the stock is retracted its just a thought from what i have seen when firing im sure the stockis rock solid and looksthe nutts

[GeneralMazaki]

No, no. There is a nub that locks the UBR tube (keeping it prefectly straight with the receiver) and prevents canting of the stock. Don't worry, magpul doesn't make crap.

[ImLargeLarry]

Nice stock, nice video! Now all I need is the stock.

[johnsen305]

like your gun!

[vaccine23]

awesome video... any idea where can i get a spare M4 buffer tube?

[S33KY]

hi my buffertube on my m4 got unscrewed today when i was airsofting o have a regular m4 le stock and a regular m4 buffertube would this help me with putting back my bufferube

[headwreckswales]

nope. Airsoft stocks are differant

[driftinsti]

sigh...this is real steel not airsoft but i'll tell you anyway. At the end of your buffer should be this cap thing.

1. remove your stock

2. unscrew the hex screw @ the bottom of the buffer tube

3. take off the cap

4 inside the buffer tube there should be a cross screw. So you just tighten that screw and ur buffer tube should be tight again.(make sure you have a LONG screw driver)

5. Put everything back together

6. Your done!

[driftinsti]

i dun even use a normal m4 stock anymore. I use a magpul UBR stock. Way better imo. :)

[ElijahDarts]

This is incredibly helpful, thanks, I've ordered the UBR, and can't wait to put it on.

If you could, could you do a video showing removing the A2-type Fixed stock? I haven't been able to find one anywhere.

[PackPractical]

I'll do my best to get one put online in the next day or so.

Tim

[ElijahDarts]

Thank you very much! It doesn't seem too difficult, but I'd like to see it done.

[Ddubya77]

You could find a video on removing A2 stock and replacing with a tele on Brownell's website. Just go under instructional videos.. later..

[PackPractical]

Im not sure what you mean by this. The buffer tube will fit any mil-spec AR-15 receiver.

[I4boris]

better lighting would have been fantastic but this was very informative, thank you.

[PackPractical]

No, you can put batteries in the compartment inside the stock if you like. I stick 2 batteries in there, then a spare bolt in the grip.

[GaZam360]

does this mean that you would have to put the batteries in the front of the m4 when using this stock?

[asnmonkey6969]

Just about ALL online stores are on back order because they are in such high demand with obama in office. I recommend visiting local gun stores or go to gun shows. I bought mine 2 weeks at my local guns how. Another local gun store I saw had a nice stock pile of non windows for $25.

[ExistBMX]

I am getting an ECHO 1 M4 RAS and I am thinking about putting a Socom Gear SOPMOD stock is it the same basic assembly

[PackPractical]

to the best of my knowledge you will need to use the buffer tube that comes with it because it has a threaded hole on the end of it to attach the main tube on. I could be wrong though. I can check when I get home tonight and let you know.

[watcherofmovies93]

ok, thank you.

[watcherofmovies93]

do you have to use the magpul buffer tube that comes with it? or can i use my buffer tube that is already on my bushmaster AR?

[xdierockx]

You have to use their tube because of the screw in the back

[fuzzypeach777]

Fine product, but very difficult to purchase. The limited production sells out almost instantly when available. Took me 2 years to finally get mine.

MagPul, superior products, inferior distribution,

[PackPractical]

It is a production model, I bought from magpul direct.

[trykp]

hi, very nice review and video.

Is this the pre-production model or their current style? whered you get btw?

thanks!