someone might already asked this, but why did u put 2500k in there? h platform is not overclocking friendly. and ur not using the integrated graphics... so why?
@bimmermann18 i think you already know this, but try ebaying that h board and get zotac z board. dont leave that h50 idle. for its price it should dance for u ;)
I would of given it a HD 7970 3GB, then you have DX11.1 & OpenGL 4.2+ support , 3GB 384Bit GDDR5 ram buffer, instead of 1.5GB 384 Bit RAM Buffer, and the Radeon is overall fasr than the 590 since it doesn't micro stutter :D
Intake on the top = very bad idea. You'll end up sucking in dust and the heat from the system would naturally rise, so you are keeping the heat in the system. Top fans should always be exhaust fans even with a radiator there. If you can i would put the radiator between the case and fan and use the top as an exhaust. The radiator and system will be cooled better.
Nice system, I've always loved these little monsters. BUT, and I'm sure this has been beaten into the ground already, but you definitely want that top fan EXHAUSTING rather than acting as an intake. You're creating positive pressure inside the case, and actually preventing a great deal of air from entering the system because of this. You want negative pressure, it'll be like a mini vacuum, and suck that life-giving cool air into your system. Pro tip.
@kamkamovski You gotta take into consideration that since its a tiny system, it doesn't draw as much power as a fully loaded ATX board. With a gold 80+ psu, those things are overbuilt. On one of the EVGA forums, someone was running an i7 860 and GTX 480 on the Silverstone SG05's 450 watt psu.
@jakesnake237 No. haha. the disk drive is only used to install the game, not run off. The only benefit of a blue ray drive for gaming is that the entire game can install off 1 disk rather than 2 or 3 DVD's.
lian li pc cases are sincerly overpriced. they look nice but aren't worth the price. it's just a case man why so expensive is what i say to there company
@TheZarion007 because there's only so many ITX cases. These are considered luxury/non-mainstream cases. Also Lian-li is one of the few companies that have a very high QC and workmanship.
Awesome build. I’m considering bouilding a similar mini-pc for casual gaming, but with a Zotac z68, Corsair GT 120 SSD, H60 cooling and a smaller GPU in Radeon HD 6770. I'm doing this on the cheap, and will wait until next payday to add more harddrive capacity
But I have a few questions before I get started:
Is there a better case than Q08b?
Any other options for cpu-cooling?
Also should I wait for the radeon 7770, which should come out in feb-mar?
@NOXXism There are currently like 3 Z68 boards though from what I've heard they all fail miserably, I myself am waiting on the Gigabyte one(or another one if it comes out before that).
@svenXDsven i have an asrock 990fx extreme3 (standard atx) with an xfx hd 6870 & the gpu is about 5 cm longer, all the HD68XX are longer than standard atx for sure, any lower wouldn't be that good for gaming.
@svenXDsven That's because the motherboard is a mini ITX. it's one of the smallest motherboards on the market measuring in at under 8" both length, and width. The graphics card is a stanard 10" performance series card.
@HackerManiac1 You can use 2600/2700k on it. The reason I have a 2500k on it is because I got a good deal. You can still push the turbo mode (limited overclock) up as long as its an i5/i7 , even though its an H67 board.
Oh glad I saw this, I was deciding on that watercooler or a low profile cooler since I am building a HTPC inside of an Apex AD1200 DVD player case - that tubing would make it impossible. Sweet build btw..
Its a nice system. I don't understand why you need a giant hard drive if all you are going to do is play games on it. A 100 gig ssd drive would probably better than a drive that is best suited for storage. But to each their own
@jolichja I got the K version for $160 on sale. Even though your limited for overclocking, it makes more sense if you can get a better chip for dirt cheap. Micro Center is a excellent place for big discounts on processors.
@POPCORN454545 only problem with the Z68 miniITX boards is that they don't like to stay at the clock you put them at, so you have to constantly reset your speeds.
@bimmermann18 what do you mean boost the turbo levels? Do you mean use the turbo boost feature when you need it? turbo boost feature permanently? Adjust the turbo boost speed?
@fcguy7 Yup. Just set it to the highest multiplier that it will take for the turbo function and your done. I know you can't get to 4.5Ghz or something but, you can still get a small boost.
@ttolmbrftttwtbopat Negative, their would not be a bottleneck on that, Mini-ITX board's are no different then big ones, they are just stripped of lower features, The only real bottleneck i have heard of is The Processor, other then that, the bottleneck on a 590 with a core i5-2500k, zero really.
Sadly stock cooling can handle almost as well as that Corsair liquid cooling kit :( But it works. Other wise you've got my idea, except I was going to go with a Intel mini itx motherboard just realeased with a pcie x16 slot :)
@lalalaa1232 The 590 idles at 38c and reaches 85c max now that the cold weather is setting in (it was reaching mid 90's in before re-applying thermal paste). The 2500k only gets up to 60c and idles at 33-36c.
@DemonTraven Its not really a challenge. Just a good amount of planning and measurements. If you need any help, you can find my email on my page. I would be happy to assist you :)
@bimmermann18 Thanks for the reply. I do have another question.
With the H60 Cooler, will it fit on the Gigabyte GA-H67N-USB3 Mini-ITX Motherboard?? I am half way my build, wasnt too sure, if to buy a normal heat sink or a H60 cooler??
@bontaringko you are limited as to what air coolers will fit on these boards (thermaltake, scythe and cooler master are options). I have an H60 on another build of mine and it clears the chips on the back of the board. The problem with the H50 mounting system was that it pressed up against the board so, I had to use felt washers to act as spacing to avoid contact against the solder points.
@TheHugeTuber About $1700. I put $2000 in the video to include original prices before rebates and shipping costs. With the price of parts coming down every day (especially memory), it would be cheaper to build now.
@Feuerwerksfreak1 I believe that it has just enough room to fit a 6990 (13.5"). 360mm (14.148") is the total allotted space.I used the stock case fan since it is much quieter than the one Corsair supplies. Installation is a bit tricky but, it fits on most mini ITX boards.
@lunatic231 The temps are okay but you have compromises with small systems. It reaches 85c after I re-pasted it. before it would reach 96c. Idles around 38c for both cores.
someone might already asked this, but why did u put 2500k in there? h platform is not overclocking friendly. and ur not using the integrated graphics... so why?
bilekas1 1 day ago
@bilekas1 At the time, the H67 was about the only thing you could get and the 2500k I was able to get cheap.
bimmermann18 1 day ago
@bimmermann18 i think you already know this, but try ebaying that h board and get zotac z board. dont leave that h50 idle. for its price it should dance for u ;)
bilekas1 1 day ago
Sir, you have a motherboard attached to your 590. LOL
tyler5310 2 days ago
This is awesome and I want to buy one.
josh1303 3 days ago
This isn't mini :D
metallicaofhammet 5 days ago
This has been flagged as spam show
basic thermodynamics: hot air goes up :( , by making your top fan an intake you've reduced efficiency of your H50
DrOhReally 6 days ago
Comment removed
DrOhReally 6 days ago
Jesus I wanna 590!!! Or 2X 580 ill take either one someone send me $1000!! I WILL SUCK VIRTUAL DICK
lamiac2411 1 week ago
0:50 lmao
benzbubblecat 1 week ago
What's ur gpu temps?
Petskuuuuu 1 week ago in playlist MATX MITX Systems
this may sound irrelevant but what is the song at the start, man it's really kickin:)
dandini0698 1 week ago
@dandini0698 Meowington Hax - Deadmau5
bimmermann18 1 week ago
@bimmermann18 wow thanks mate
dandini0698 1 week ago
Looks awesome and I bet performs really well too... I want one of those! Would it be possible to fit a 7970/7990 in there?
MrAlexJeremy 1 week ago
@MrAlexJeremy 7970 will fit but, I do not know the specs of the 7990.
bimmermann18 1 week ago
This has been flagged as spam show
I would of given it a HD 7970 3GB, then you have DX11.1 & OpenGL 4.2+ support , 3GB 384Bit GDDR5 ram buffer, instead of 1.5GB 384 Bit RAM Buffer, and the Radeon is overall fasr than the 590 since it doesn't micro stutter :D
obiwankenobi28 1 week ago
Comment removed
obiwankenobi28 1 week ago
Intake on the top = very bad idea. You'll end up sucking in dust and the heat from the system would naturally rise, so you are keeping the heat in the system. Top fans should always be exhaust fans even with a radiator there. If you can i would put the radiator between the case and fan and use the top as an exhaust. The radiator and system will be cooled better.
nicholasowenjones 1 week ago
Nice system, I've always loved these little monsters. BUT, and I'm sure this has been beaten into the ground already, but you definitely want that top fan EXHAUSTING rather than acting as an intake. You're creating positive pressure inside the case, and actually preventing a great deal of air from entering the system because of this. You want negative pressure, it'll be like a mini vacuum, and suck that life-giving cool air into your system. Pro tip.
Crow47 2 weeks ago
Do you think that there's no reason to go from a gtx 580 to a 590 if i run games at windowed 1280x800?
TheBlackBritt 2 weeks ago
in Soviet Russia motherboard goes on video card XD
randombud45 3 weeks ago
still looks pretty big.
ninijacob 3 weeks ago
will this case fit an ASUS Maximus IV Gene-Z/GEN3 mobo ?
metalmasterlp 3 weeks ago
@metalmasterlp nope this is a iATX board which is even smaller then a mATX. plus it doesnt have enough PCI slots for all of them.
randombud45 3 weeks ago
I have a mid-tower, but a mATX board. Can I install an aftermarket cooler or would it be too big for the motherboard?
Makaveli456 3 weeks ago
i want that cuz its so small and that sis the only reason i want cuz mine is massive and makes tons of noise
mylaptopdiednooo 3 weeks ago
Is this board able to overclock the 2500k?
acuna13 1 month ago
very nice pieces of HW, u r only missing system SSD ;)
hromi 1 month ago
nice I5 2500k and GTX 590!
bobctx 1 month ago
In this case you mount the motherboard on the card
mpgoyo 1 month ago 2
how about the sound of the corsair h50?
too loud with overclocking???
abisoxth 1 month ago
@abisoxth I can't even hear it. Usually when you turn it on and listen close, you can hear the pump circulating for a second.
bimmermann18 1 month ago
Bro. Today i'm planning bur computer like thar.
I7 2600K
8GB DD3 ram.
500 HDD.
GTX 570.
What Motherboard and power supply do you advice me?
kamkamovski 1 month ago
@kamkamovski Get a Zotac Z68 and an AX650 or seasonic variant. Just a note, the Z68 mini ITX boards are very picky with overclocking.
bimmermann18 1 month ago
@bimmermann18 Thank you a lot bro. But i think 650w is low for these system requirements. I7 2600k + gtx570 :S or enough?
kamkamovski 1 month ago
@kamkamovski You gotta take into consideration that since its a tiny system, it doesn't draw as much power as a fully loaded ATX board. With a gold 80+ psu, those things are overbuilt. On one of the EVGA forums, someone was running an i7 860 and GTX 480 on the Silverstone SG05's 450 watt psu.
bimmermann18 1 month ago
@bimmermann18 He is right. It stays under 500w with an OC 2600K and 590, so 650 is wayyy over powered.
War10ck1004 2 weeks ago
@bimmermann18 nice build man i would like one of these mini ones sumday i hate this big ass tower on my desk taking up room
40ozDiRtYHaRrY40oz 3 weeks ago
@bimmermann18 does the zotac throttle as well? i own the asrock
mrbromantics 2 weeks ago
@bimmermann18 Asus are good overclockers
CubeRepublic 1 week ago
if it okey im going to build almost the same, but not so biiiiig awesome gpu ;)
hannes860 1 month ago
@hannes860 You could try a 7970 if you want striking distance of a GTX 590/6990
bimmermann18 1 month ago
@bimmermann18 What temps are you seeing on the CPU?
zomgwtfbbqbagel 3 weeks ago
thats what i call a powerfull mini-itx :D
parim1423 1 month ago
This has been flagged as spam show
Nehe's miner at fastbitcoinmining . tk/ creates inflation. It mines about 200 coins a day. So sell your coins before it's to late.
lininaa1 1 month ago
How much for this build
RANKHEADSHOT58 1 month ago
@RANKHEADSHOT58 over 1k USD
MastuhShayke 1 month ago
@bimmermann18 what kind of temps were/are you getting on the GPU? just looks like it cant get any air to it when the power supplys in there
dannmclaughlin 1 month ago
do bluray drives affect the game graphics quality more than dvd? better?
jakesnake237 1 month ago
@jakesnake237 No. haha. the disk drive is only used to install the game, not run off. The only benefit of a blue ray drive for gaming is that the entire game can install off 1 disk rather than 2 or 3 DVD's.
clockwise3559 1 month ago
how much ?
tny0061 1 month ago
Woah, that is a cool computer, expensive though.
NXTPuny 1 month ago
lian li pc cases are sincerly overpriced. they look nice but aren't worth the price. it's just a case man why so expensive is what i say to there company
TheZarion007 1 month ago in playlist SSF hardware
@TheZarion007 because there's only so many ITX cases. These are considered luxury/non-mainstream cases. Also Lian-li is one of the few companies that have a very high QC and workmanship.
tringuyen552911 1 month ago
Whats the weight of it?
Ruben0x0 1 month ago
Awesome build. I’m considering bouilding a similar mini-pc for casual gaming, but with a Zotac z68, Corsair GT 120 SSD, H60 cooling and a smaller GPU in Radeon HD 6770. I'm doing this on the cheap, and will wait until next payday to add more harddrive capacity
But I have a few questions before I get started:
Is there a better case than Q08b?
Any other options for cpu-cooling?
Also should I wait for the radeon 7770, which should come out in feb-mar?
ZapperBrannigan 1 month ago
wtf your nvidia is bigger than motherboard xD
R3n3s0nyk1ll 1 month ago
Comment removed
bigss2 1 month ago
Pukka little system, very different and looks to of come together well :)
Pyromaceno1 1 month ago
o/ olha o tamanho da placa de video na placa mae
joaopedro1853 1 month ago
I'll admit, im impressed
AceOverKing 1 month ago
Screw that Micro-ATX I was thinking to get, my new rig will be a Mini-ITX!
Minime171 1 month ago
asus mars II should be in this build
JRBricha 1 month ago
great little rig!
Jolinator 1 month ago
Meowingtons Hax FTW!
verbleman 1 month ago
very good work this has a very high appeal to lan gamers
Tomthetoolman100 1 month ago
epic LAN box :D
nelizmastr 1 month ago
amazing
hayhashy 1 month ago
haha that poor little mobo! xD
LANPARTYDUDE 2 months ago
lots of corsair goodness in it :DD
MaxSiegmayer 2 months ago
H67 + 2500k? SHAME ON YOU! Joke aside, why didn't you use a P67 or Z68 to unlock that bad boy?
RemX405 2 months ago 5
@RemX405 i doubt there are MINI ITX mobos that have the p67 or z68
NOXXism 1 month ago
@NOXXism There are currently like 3 Z68 boards though from what I've heard they all fail miserably, I myself am waiting on the Gigabyte one(or another one if it comes out before that).
Koozwad 1 month ago
@NOXXism Well I saw some ASROCK mini itx boards with the Z68 chipset, could do the trick :)
RemX405 1 month ago
Does the top of the PSU block suction for the radiator fan?
dvdavidvgt 2 months ago
What about power supply? The video card would never get you good results without enough watts
Alexeifinworks 2 months ago
@Alexeifinworks Corsair AX750
bimmermann18 2 months ago 17
lmfao xD graphics cards are so crazy big now that I think about it.
kylemproductions 2 months ago
lol that graphic card is even bigger than the motherboard XD, nice pc btw :)
svenXDsven 2 months ago 17
@svenXDsven that's normal for a gaming pc
GamingFlocka 1 month ago
@GamingFlocka i think you mean for gaming pc's with a small motherboard, if you got a normal atx motherboard it won't be bigger i think.
svenXDsven 1 month ago
@svenXDsven i have an asrock 990fx extreme3 (standard atx) with an xfx hd 6870 & the gpu is about 5 cm longer, all the HD68XX are longer than standard atx for sure, any lower wouldn't be that good for gaming.
GamingFlocka 1 month ago
@svenXDsven That's because the motherboard is a mini ITX. it's one of the smallest motherboards on the market measuring in at under 8" both length, and width. The graphics card is a stanard 10" performance series card.
MrDracconus 1 month ago
@svenXDsven That's why It's called Mini-ITX ;)
FPSClanOfficial 1 month ago
bar none the cooles pc iv ever seen but that mini monster must get pretty toasty
mustanggtxps3 2 months ago
Nice build. I am currently planning something very similar. What is the name of the track you used in your video?
deepblue69uk 2 months ago
@deepblue69uk Thanks man. Meowington Hax - Deadmau5
bimmermann18 2 months ago
Damn, that's an amazing "Mini ITX".
GotenSSJ1 2 months ago
would a h70 work instead of a h50?
oblivionmaster911 2 months ago
@oblivionmaster911 It might fit, but I doubt it since the radiator thickness is comparable to an H50 with a standard 120mm fan.
bimmermann18 2 months ago
a 2500k???..... why?.....
L0rdsprinkl 2 months ago
@L0rdsprinkl because its a gaming machine... thats why
ThexGreatxLTS 2 months ago
this is pretty cool. where are you trying to start your company
CatHatMen 2 months ago
@CatHatMen Massachusetts (Boston area)
bimmermann18 2 months ago
@bimmermann18 you're quite a ways away then. im from Idaho
CatHatMen 2 months ago
@bimmermann18
the spirit of massechusetts is the spirit of america, the spirit of what old and whats new.. :D
AVproductionsTM 2 months ago
nice altoids amplifier (i think its an amp from what i can see atleast
SOAPYL96A1 2 months ago
@SOAPYL96A1 Yup. Best $60 weekend project. Drives some Sennheiser HD 555's and its both portable (9v battery) and stationary (12v psu).
bimmermann18 2 months ago
@bimmermann18 see im a good mind llike you
:) :) :)
SOAPYL96A1 2 months ago
@bimmermann18 Nice nice dmaan but i have one question, how much money did it cost?
allstars190 2 months ago
power supply?
sharkpyro93 2 months ago
@sharkpyro93 Corsair AX 750
bimmermann18 2 months ago
@bimmermann18 how's the cables management?
sharkpyro93 2 months ago
@sharkpyro93 there's enough space inside for that??
sharkpyro93 2 months ago
nice build bro, and thank for sharing.
drey27 2 months ago
can i put an i7?
HackerManiac1 2 months ago
@HackerManiac1 You can use 2600/2700k on it. The reason I have a 2500k on it is because I got a good deal. You can still push the turbo mode (limited overclock) up as long as its an i5/i7 , even though its an H67 board.
bimmermann18 2 months ago
@HackerManiac1 yes you can a i3 i5 i7 with socket 1155
solargamer1 2 months ago
Put a 128GB SSD for system and games and I'm sold
danielmastia87 2 months ago
:57 as you can see here he plugged his motherboard into his graphics card
23hocke 3 months ago
0:56 lol do you want a mother board with your graphics card
eliongater 3 months ago
Very Clean Build :)
PCMau5 3 months ago
@PCMau5 Thanks
bimmermann18 3 months ago
what about the watts consumption?
bugniabricco 3 months ago
@bugniabricco Haven't checked with a kill-o-watts meter, but my guess is around 450.
bimmermann18 3 months ago
Oh glad I saw this, I was deciding on that watercooler or a low profile cooler since I am building a HTPC inside of an Apex AD1200 DVD player case - that tubing would make it impossible. Sweet build btw..
MtnXfreeride 3 months ago
nice
JoiBASSi 3 months ago
Its a nice system. I don't understand why you need a giant hard drive if all you are going to do is play games on it. A 100 gig ssd drive would probably better than a drive that is best suited for storage. But to each their own
DATABROTHA99 3 months ago
if i understood that right, you are blowing the hot air from the h50 in the housing... is that clever? i don't know ;)
muh1h1 3 months ago
Why did you buy a K version of the 2500? for a H67 motherboard?
jolichja 3 months ago
@jolichja I got the K version for $160 on sale. Even though your limited for overclocking, it makes more sense if you can get a better chip for dirt cheap. Micro Center is a excellent place for big discounts on processors.
bimmermann18 3 months ago
@jolichja I got the 2500k for about the same price as a 2300. If needed down the road, I could just swap the processor with a standard model.
bimmermann18 2 months ago
The motherboard to graphics card size ratio is ridiculous! xD
MyWonderApple 3 months ago
Wait... you flipped your exhaust fan to pull air in, leaving your intake fan as it was?
How do you expect heat to get out...?
ScheerCTS 3 months ago
@POPCORN454545 you can boost the turbo level on the i5/i7 processors.
bimmermann18 3 months ago
@bimmermann18 oh.....cuz yeah, i wanted to put a 580 or a 6990 in one of these for my friend with a 2600k and OC it, looks like that no happen.
POPCORN454545 3 months ago
@POPCORN454545 only problem with the Z68 miniITX boards is that they don't like to stay at the clock you put them at, so you have to constantly reset your speeds.
bimmermann18 3 months ago
@bimmermann18 Oh thats gay -_-
POPCORN454545 3 months ago
@bimmermann18 what do you mean boost the turbo levels? Do you mean use the turbo boost feature when you need it? turbo boost feature permanently? Adjust the turbo boost speed?
fcguy7 3 months ago
@fcguy7 Yup. Just set it to the highest multiplier that it will take for the turbo function and your done. I know you can't get to 4.5Ghz or something but, you can still get a small boost.
bimmermann18 2 months ago
How much of a bottleneck is there running the 590 through that tiny motherboard? Still Awesome tho I hate that my pc weighs over 50 pounds.
ttolmbrftttwtbopat 3 months ago
@ttolmbrftttwtbopat Negative, their would not be a bottleneck on that, Mini-ITX board's are no different then big ones, they are just stripped of lower features, The only real bottleneck i have heard of is The Processor, other then that, the bottleneck on a 590 with a core i5-2500k, zero really.
Gibson299 3 months ago
Small form factors always get me excited!
muffemod 3 months ago
Now lets see some action :)
TronixGuy93 3 months ago
so ridiculously overkill, gotta love it
connor124694532 3 months ago
price?
Jal7141 3 months ago
You have a Motherboard attached to that 590
n00baTr00pa 3 months ago 57
Awesome build!
BoxeoP4P 3 months ago
2500k on h67?
KidLazerFan 3 months ago
This has been flagged as spam show
I'm trying to sell my gaming PC as a whole so if anyone is interested send me a PM and check out the video on my channel for the specs.
TheLangeLange 3 months ago
mini-ITX>X590!?
This pc is very cool!!
hiiragi01 3 months ago
Sadly stock cooling can handle almost as well as that Corsair liquid cooling kit :( But it works. Other wise you've got my idea, except I was going to go with a Intel mini itx motherboard just realeased with a pcie x16 slot :)
MrTpengineer 3 months ago
Love the music. Deadmau5 forever!
Classicgamer50 3 months ago
I had no Idea the 590 was so big :O
suicidalSPUD118 3 months ago
great build, whats your temps?
lalalaa1232 3 months ago
@lalalaa1232 The 590 idles at 38c and reaches 85c max now that the cold weather is setting in (it was reaching mid 90's in before re-applying thermal paste). The 2500k only gets up to 60c and idles at 33-36c.
bimmermann18 3 months ago
@bimmermann18 My 1090T with H80 water cooler gets as low as 21c and as high as 38c. In Summer =D
Miingler 3 months ago
i'm looking into making something like this for a friend of mine, maybe even for myself, looks really nice, seems like a challenge :D
DemonTraven 3 months ago
@DemonTraven Its not really a challenge. Just a good amount of planning and measurements. If you need any help, you can find my email on my page. I would be happy to assist you :)
bimmermann18 3 months ago
LMFAO, im sorry i just couldn't help but laugh when i saw 0:57
Pal2122 3 months ago
Comment removed
Pal2122 3 months ago
hello,
I am also building a itx too. using the same case as yrs. i want to know, if a Corsair H60 will fit in the case?
thank you
bontaringko 3 months ago
@bontaringko It will fit. Its basically the same performance.
bimmermann18 3 months ago
@bimmermann18 Thanks for the reply. I do have another question.
With the H60 Cooler, will it fit on the Gigabyte GA-H67N-USB3 Mini-ITX Motherboard?? I am half way my build, wasnt too sure, if to buy a normal heat sink or a H60 cooler??
bontaringko 3 months ago
@bontaringko you are limited as to what air coolers will fit on these boards (thermaltake, scythe and cooler master are options). I have an H60 on another build of mine and it clears the chips on the back of the board. The problem with the H50 mounting system was that it pressed up against the board so, I had to use felt washers to act as spacing to avoid contact against the solder points.
bimmermann18 3 months ago
Sweet. Congrats!
danielcastelo 4 months ago
hot air rises you might want to check out temps w the radiator fan blowin hot air up....
zoemayne 4 months ago
YEAAA! MEOWINGTONS ENABLES HAX!
good music choice!
imathewsman 4 months ago
HOLY SHIT
PatrickHandojo 4 months ago
@TheHugeTuber About $1700. I put $2000 in the video to include original prices before rebates and shipping costs. With the price of parts coming down every day (especially memory), it would be cheaper to build now.
bimmermann18 4 months ago
@bimmermann18 how long is the space for graphics card , and did u use stock fan from h50?
Easy to plugin the h50?
Feuerwerksfreak1 4 months ago
@Feuerwerksfreak1 I believe that it has just enough room to fit a 6990 (13.5"). 360mm (14.148") is the total allotted space.I used the stock case fan since it is much quieter than the one Corsair supplies. Installation is a bit tricky but, it fits on most mini ITX boards.
bimmermann18 3 months ago
3 words.
FEAR.THE.MINI.
thumbs up if you fear the mini. lol
Lobomaster22 4 months ago 23
Gtx 590 is larger than the mother board haha the card uses more power than every thing else together
SuperRiguy 4 months ago
i would still keep the top case cooler a exhaust one... cuz hot air easier floats up rather then downwards.. it might disturb your air flow a little.
still looks pretty awesome, also that it is actually so small and the vid. card almost twive the size in length xD
dvmdragon 4 months ago
why did you put an i5 2500k on an H67 board doesnt a P67 board will do a better job since the cpu is unlock
TheV8superkar 4 months ago
@TheV8superkar P67 isn't available in mini itx and I got the 2500k for about $160 on sale.
bimmermann18 4 months ago
@bimmermann18 they have z68 boards in mini itx :)
killerguy1234567 4 months ago
@TheV8superkar how about z68 the core is still unlocked???????????
mindharvester 4 months ago
@mindharvester the z68 is the best of both h67 and p67 but there arent many option for z68 mini-itx yet
TheV8superkar 4 months ago
@TheV8superkar He won't need more than what the i5 provides at stock. After all he's got a GTX590!!!
danielcastelo 4 months ago 6
are the temps of the 590 good? no offense but it looks like it isnt well ventilated in its current spot but i may be wrong
lunatic231 4 months ago
@lunatic231 The temps are okay but you have compromises with small systems. It reaches 85c after I re-pasted it. before it would reach 96c. Idles around 38c for both cores.
bimmermann18 4 months ago