RC ADVENTURES - PT3 - AXIAL SCX10 HONCHO SCALE RC TRUCK KIT BUILD - PROLINE SHOCKS

[hhhhjhhhful]

hey medic,

i was wondering what motor you would reccomend for a axial wraith, i want reasonable speed like a summit and torque. also i was wondering what you would recomend for a axial scx10 used for the same purpose. thanks:)

[WaylonC1978]

hey medic love this part of the build now i know what shocks im going to run when i build my truck..please answer me this...this will be my first rock crawler should i get the kit or the rtr and upgrade it some

[GtGills]

Hey medic when u put grease in the transmission would put the stock grease or marine grease

[partyoverseer]

The speed building is just his normal speed he slows down for most of the vid...lol

[202lloydy]

doese the truck come assembled?

[quadguy112895]

hey medic, can you put marine grease in the tranny?

[djmedic2008]

@quadguy112895 Only if you pay "her" enough

[quadguy112895]

@djmedic2008

at first i was like "wtf is her talking about"

*re-reads comments*

Me: oh... *facepalms*

No but seriously, can you put marine grease in the tansMISSION? im thinking about getting one. or the wraith, but i dont got 600 to put into an rc. also, i got few other q's if youre wiling to answer.

[djmedic2008]

@quadguy112895 Lol.. yes man, you can put it in the tranmssion. If you watch my MOST recent build video series, i really get into it :)

[quadguy112895]

@djmedic2008 yeah, ive been watching those on your build. i was just wondering with this cause the trans is so much smaller.

[djmedic2008]

@quadguy112895 you dont need to pack it full.. but a nice thin coat is very nice. Makes it quieter over time too!

[quadguy112895]

@djmedic2008 yeah "dont pack it full or you'll have no movement" (or something like that) and way back i asked where to get plastidip and fred meyer has it!

[n3qdz]

Dude, Why the hell is it always I watch you're builds and I soooo get sucked in! Once again great build and I am working on getting a xr10 and follow it in the build of that! I just gotta get some 'momma don't know money"! This hobby ain't cheap but, it's cheaper than going to the bar every night. Great fun keep up the "fun work"

[Tboninator]

Also "tooth gear" for the ring gear on the diff...

[Tboninator]

I've been enjoying these build videos, and they're very well produced... Just can't get over the terms you come up with for various parts... "Drive cup" for the diff carrier, "Y-harness" rather than link, etc... Not really a problem, just kinda' funny.

[RCWinnipeg]

Medic: Great tip on compressing the shock and putting the cap on I usually just leave piston at the bottom and let them sit for an hour... I will be trying your method next time :) thanks bro!

[zackeueo]

whats better an axial scx10 tr or the axial scx10 honcho tr

[Naturepheonix]

Your voice is so epic.

[MrBajaboy5b]

what is the last song u play?

[djmedic2008]

@MrBajaboy5b Its called "Happy Inside" Produced by DJ MEDiC in 2006. Its on the CD "Revolutions" avail on iTunes and other online music stores

[MrBajaboy5b]

@djmedic2008 thank u

[alexbeast14]

@djmedic2008 Wait, your really a DJ?

[djmedic2008]

@alexbeast14 you bet bud... I was a rave dj for 7 years, and produced techno for 3

[djmedic2008]

Part 4 is now available as a video response below

[TheBigtime56]

@djmedic2008 cool! i want a trail truck and i wonder what would be a good budget truck for me

[startazz]

Great couple of builds mate ;-) i used to have a few rc trucks but lost intrest in them to quick my age i guess but i did enjoy these builds so i shall be watching more,i'm more into my rc planes but i've just subscribed to your channel after beging friends for a while ;-) thumbs up.

[vaultstory]

i love these type of videos ,probably because i love to assemble the kits ,Now i will say when i went to get my scx10 honcho they where on major back order so i got the older version with the green body,used some steel brake line and threaded rod and stretched the links out to correct length and ordered the body it lacks only the bumper .

[4mods]

I've been using my teeth for the damn drive shafts, this is great!

Keep it up! ;)

[jacobtraxxasman]

those ilets are actually called rod ends.

[kyson555]

ever think about making ur own dvds and selling them?

[kyson555]

woot woot loving it medic!

[TraxxasRCFreak]

Its coming along really good Medic, still can;t wait for finished project!!!

[JOHNDEEBANK]

I had no idea how intricate building one of these can be. Thnx my friend . After #2, I couldnt wait for #3. Now I cant wait for #4. Ur instructional talents r great.

John. Guelph, Ont.

[djmedic2008]

@JOHNDEEBANK my pleasure my friend.. Im glad to hear you enjoying the show :) These kits can get incredibly intricate. My first build video series was on the Tamiya Toyota Tundra, last year. This build is in anniversary of that video series - so Im glad to hear you are having just as much fun watching it, as i do filming it for you

[xXShadowRejectsXx]

nice vid medic!!! im dying for more!!!!!!!!!

[keith179150]

Cool, that screwdriver is tiny i couldnt use that with my fat hands lol

[beastly239]

are you related to squirrelod?

[djmedic2008]

@beastly239 Hahaha.. no my friend.. we are not related... just like the same hobby

[kasea150jim]

@beastly239 the only diference is dj is more into crawling

[beastly239]

@kasea150jim haha yep

[Na8sap]

Awesome stuff medic..

[jauchiu]

Your videos are great. I you aren't in the teaching profession you should be.

[jauchiu]

@jauchiu Not I. If. Note to myself. PROOF READ BEFORE POSTING.