The deal is gather water from the rain, and spark the chain reaction.
You can lvl up your filter system by separating the layers by using ''moskitos nets''(there are many types of them), adding proper layers of rocks,charcoal,and gravel.
And to up grade that, you double it !! By using more filtering barrels :D
Nice work! Something you might want to look at is an article you can find if you paste the following into google: "sea shells used to clean up heavy metals"
I don't know whether adding a layer of crushed sea shells would be effective in improving biosand filters to remove heavy metals, but it's something to investigate.
I'm going to post this comment in a few places to help seed this idea, because I haven't seen anything being done with this.
the system needs to have dirty water run through it for 2-3 weeks to build up the layer of shmutzdecke, it must be kept moist at all times. Then the water can be used. I think. Correct me if im wrong.
After running it through that massive filter you might want to run it through one of those ceremic silver filters and a activated charcoal filter. Great work you have a little water for life we need to return to building cisterns to store water we are counting too much on ground water supply in some areas. Eventually cities will have to shed population due to lack of water.
Im not sure of the actual name of the bacteria. It costs nothing! It forms naturally on the top inch of the sand. This bio layer forms after a few weeks and is called Schmutzdecke. This biological layer traps and feeds on microorganisms and contaminants in the water.
Great video; thanks for the detailed instructions - every community shelter should maintain one of these - the convenience of bottled water and commercial carbon filters can disappear in a hurry,
Hello, Thank you for commenting. When the top bio layer was complete, it's flow rate was approximately 15 liters / hour. The flow rate increases and decreases according to the bio layer (the more gunk you have at the top, the slower the water passes through).
You are correct about how sand filters a water spring... HOWEVER, with a spring, the water passes through ALOT of sand, much more than what could be put into a barrel. (like 10 feet of it).
In order to filter correctly using the depth of barrel, you must use very fine sand, not the type you could dig up. I use super fine sand purchased from a sand gravel supply company. It's the fine sand used in swimming pool filters. Please note, the BIO LAYER is what does most of the filtering.
But I think the world could really benefit from this a whole lot more if you did give us a few more simple figures. How long does it take to filter one liter? Can you use a type of sand that can be dug for self-sufficiencies sake? I assume that is how water springs work. Cheers!
It should last for a long time, not sure how long though. It depends on how dirty the water is you are filtering. The more it filters, the more stuff gets trapped at the top layer. As this happens, the flow rate will decrease. You will have to remove some of the top layer of slime, and then let it regrow.
The deal is gather water from the rain, and spark the chain reaction.
You can lvl up your filter system by separating the layers by using ''moskitos nets''(there are many types of them), adding proper layers of rocks,charcoal,and gravel.
And to up grade that, you double it !! By using more filtering barrels :D
Thats it !!
Pesadelo80 10 months ago
clear water is not good water! it s lesson i ve teatched in haiti when i got there
sand filter does not remove the air pollution fro the rain water.
neither SO2 nore heavy metals (lead) nore the organic chemicals ( insecticide, light petroil maiden chemicals)
F0RD0Z 11 months ago
whats wrong with you, too proud to use normal stuff, like carbon
samljer 1 year ago
very informative. what is the solar panel on top of the barrel for?
WilsonStanley 1 year ago
very informative. what is the solar panel on top of thesrw barrel for?
WilsonStanley 1 year ago
Kool
smartbetta 1 year ago
Did u when and see ur doctor the next day? Lol
smartbetta 1 year ago
lol yeah don't try it at home until after you boil that filtered water. Might want to add that in there somewhere.
maidmercy 1 year ago
After a certain period of usage, many dirt and particles will be stuck inside the sand, right? How to clean them?
Zatataw 1 year ago
Now we just need to know if this can remove chlorine and fluoride, a main cause for concern in city water supplies...
I use Borax to fight fluoride, but this would be more self-sufficient yet. Please reply if you know.
fireseed23 1 year ago
Have you ever been ill from drinking the filtered water?
gavinwph 1 year ago
Excellent! Thanks for the video. I have watched dozens trying to find the info you presented here.
Raykenn1 1 year ago
@Raykenn1 I agree completely- much more informative about the specifics of how the biofilter works than other videos I have seen.
KeyCarist 1 year ago
DEZEVNICA JE NAJBOLSA KER NIMA NOBENE KEMIKALIJE,,,CE VODA IMA KEMIKALIJE JE POTREBNO SE POSEBNO KEMICNO OCISTITI....
lslavychecker 1 year ago
Odlicno za dezevnice in vode ki nimajo kemikalije-drugace je potrebno se dodatno ciscenje....
lslavychecker 1 year ago
Nice work! Something you might want to look at is an article you can find if you paste the following into google: "sea shells used to clean up heavy metals"
I don't know whether adding a layer of crushed sea shells would be effective in improving biosand filters to remove heavy metals, but it's something to investigate.
I'm going to post this comment in a few places to help seed this idea, because I haven't seen anything being done with this.
doodadica 1 year ago
Thanks for the info about the sea shells, I'll check it out. Keep posting the idea!
ArashiNage 1 year ago
Would it be benificial to add a layer of charcoal?
MrB0TT 1 year ago
lol schmutz decke
MrElektrolyt 1 year ago
Why can't I try it at home?
HideousMonsterHank 1 year ago
...because if the filter is not built properly, the bacteria in the water could give you some explosive shits! :D
ArashiNage 1 year ago 3
@HideousMonsterHank
the system needs to have dirty water run through it for 2-3 weeks to build up the layer of shmutzdecke, it must be kept moist at all times. Then the water can be used. I think. Correct me if im wrong.
wonderboy9083 1 year ago
where can I buy this type of sand? you can send info to..shootitto@aol.com
StrictlyJmD 1 year ago
What is your active carbon reservoir? Charcoal??
daviddpb75 1 year ago
would be cooler if you did number 1 in the bucket then filter it then fill a cup up etc jk.
cool video, wonder how well that filters the water and how long the filter lasts.
theafrodude22 2 years ago
After running it through that massive filter you might want to run it through one of those ceremic silver filters and a activated charcoal filter. Great work you have a little water for life we need to return to building cisterns to store water we are counting too much on ground water supply in some areas. Eventually cities will have to shed population due to lack of water.
cdltpx 2 years ago
great video, What's the name of the beneficial bacteria and how much does cost?
gilberto2012 2 years ago
Im not sure of the actual name of the bacteria. It costs nothing! It forms naturally on the top inch of the sand. This bio layer forms after a few weeks and is called Schmutzdecke. This biological layer traps and feeds on microorganisms and contaminants in the water.
ArashiNage 2 years ago
@ArashiNage anybody done any testing with urine, will it clean it enough to drink? thanks
405george 1 year ago
Great video; thanks for the detailed instructions - every community shelter should maintain one of these - the convenience of bottled water and commercial carbon filters can disappear in a hurry,
gfpfan 2 years ago
Hello, Thank you for commenting. When the top bio layer was complete, it's flow rate was approximately 15 liters / hour. The flow rate increases and decreases according to the bio layer (the more gunk you have at the top, the slower the water passes through).
ArashiNage 2 years ago
You are correct about how sand filters a water spring... HOWEVER, with a spring, the water passes through ALOT of sand, much more than what could be put into a barrel. (like 10 feet of it).
In order to filter correctly using the depth of barrel, you must use very fine sand, not the type you could dig up. I use super fine sand purchased from a sand gravel supply company. It's the fine sand used in swimming pool filters. Please note, the BIO LAYER is what does most of the filtering.
ArashiNage 2 years ago
This is really, REALLY cool man.
But I think the world could really benefit from this a whole lot more if you did give us a few more simple figures. How long does it take to filter one liter? Can you use a type of sand that can be dug for self-sufficiencies sake? I assume that is how water springs work. Cheers!
fireseed23 2 years ago
see above reply, thanks!
ArashiNage 2 years ago
how many liters does it make in an hour?
please reply
bassamry 2 years ago
you didn't swallow that water did you? looks like you spit it out off camera. this is go green trickery.
razormanxx 2 years ago
It should last for a long time, not sure how long though. It depends on how dirty the water is you are filtering. The more it filters, the more stuff gets trapped at the top layer. As this happens, the flow rate will decrease. You will have to remove some of the top layer of slime, and then let it regrow.
ArashiNage 2 years ago
you're a fricken hippie. how long can it keep filtering, and does that slim form naturally or did you add something
razormanxx 2 years ago