I suggest to turn off the : W, mAh, A, Time readouts, they are of no use in this plane with gasoline engine, also why did you select to see the GPS position two places on the screen ?
This is actually an electric plane. But to make things faster, we were able to plug the main battery in without removing the wing, but if we removed the wing, we could have plugged in the current and voltage sensors. The OSD features can be controlled by a signal from a standard RX.
It is meant for a three position switch so that you can have: Off, On, On with GPS. But we only had a two position switch, and we had programmed the gps to show up anyway, so when we activated the OSD, it also added the second gps reading.
Back to the drawling board.
Sp33dyD3m0n 1 year ago
looks like it hit someone
grame141 3 years ago
Almost, the orange thing which it just missed was a traffic cone outlining the mission boundary. A few guys did run out of the way though.
BlueSupremacy 3 years ago
Excellant overlay.
SgtRic58 4 years ago
ok I see electric cool, my fault.
well the extra gps position is due to your RC switch was not setup for 3 positions ?
it is : all-off, normal, normal+GPS pos.
so if your normal layout contain a GPS info, you will get two of them with the last switch position.
alfa49alfa 4 years ago
I suggest to turn off the : W, mAh, A, Time readouts, they are of no use in this plane with gasoline engine, also why did you select to see the GPS position two places on the screen ?
PS: I hope your plane is ok soon again
alfa49alfa 4 years ago
This is actually an electric plane. But to make things faster, we were able to plug the main battery in without removing the wing, but if we removed the wing, we could have plugged in the current and voltage sensors. The OSD features can be controlled by a signal from a standard RX.
BlueSupremacy 4 years ago
It is meant for a three position switch so that you can have: Off, On, On with GPS. But we only had a two position switch, and we had programmed the gps to show up anyway, so when we activated the OSD, it also added the second gps reading.
BlueSupremacy 4 years ago