Hey, I just bought a 92 E36 coupe just like this one but white. I love what you´ve done to this one, you have good taste.. Mine is not in very good cosmetic shape, but the engine is fine (that´s all I care about, I love the way it sounds). I already ordered the same rims you have there, an exhaust, intake, and I have to do a good paint job to make it look decent. The interior is in bad shape. Do you know a seller that has interior parts such as door panels, etc? thanks.
@guillerod81 Bavarian Auto Recycling has hundreds of used bmws & parts worth checking out, or u can try my guy up here in canada at Bimmer Parts he has a smaller but usually good selection and can ship worldwide. good luck with your project and don't forget about suspension. Note: e36's will always have that ugly front wheel gap unless you upgrade to coilovers
@Bmwdonny honestly i really dont care for the color either, but i've tried to do what i can to make it work. The girls can stand in line all day long but my biggest challenge is actually stopping to let any of them in, just always having to much fun driving the damn things. And thats always been the best reason for owning bmw's, everything else is just a bonus.
@SKUSANWOLEK: Very nice ride! I just bought a '95 325iC a couple months ago w/ 98K miles on it. It's pretty clean and original. I've been wanting to swap out the factory steering wheel because it just feels huge. Did you put that Momo on there or was it already swapped out when you bought it? I want to swap mine out with a Momo or other type, but afraid that I might get an airbag warning light or electrical problem by doing that. Any issues w/ yours?
@superagent44 Soon as you disconnect the wheel or remove the front seats the SRS dash light will turn on and the only way to turn it off is using the SRS reset tool witch works on 95 or later models(obd2). You can buy one from peake research or just have your mechanic do it, witch ever is cheaper. My 92(obd1)is a little harder to reset but this was done before i got the car so i'm guessing the light was just disconnected when my wheel and M3 gauges were installed.
@BavarinMotorSportBMW You know, i get asked about that bar allot, but i don't have an answer because it was just part of the truck full of extra parts i got when i picked up the car . sorry, mabey i'l have to try to look it up
@SKUSANWOLEK ok well im completely jealous of your beautiful car. i have a little e36 325 but it needs loads of help and recomendations would be appreciated
@rosahairsalon I can't hear anything over the sound of exaust except the sound it makes scraping over speed bumps lol. "get you some fog lights"? WTF? you should get some fog lights is how it's said properly. Besides iv'e broken more fog lights that i can remember and i'm just sick of replacing them, fuck the fogs i don't need them anyways :P
@SKUSANWOLEK Thanks for the response, my 93 325is looks just like yours, same color, with tan interior, all windows are tinted, i use to have the same wheels you have until i got tire of all noise and the crap that goes with it,, i like mine as original as possible.
nice car thou. congratulations. And yes i do fog lights on mine.
@SKUSANWOLEK What is the off set on the Beyern rims?? I know they are staggered 8.5 and 9.5 but i really like how your car sits and i just wanted to know the offset of the rims.
@bmwgroetken i cant remember the exact number and i think the fronts are diff than the back, somewhere between 35 and 43 i think. the backs were actually rubbing on the inside wheel well because of the high offsett, but nothing a set of spacers and a fender roller didn't fix. if you run coilovers the fronts will contact the springs so a 8mm spacer at least will need to be used with these wheels
very clean build! love that you kept the OEM styling and took every mod under consideration whether it was trashy or not. Also, its weird that you can turn you car on with just the key. my 99 M3 requires you depress the clutch while turning the key to turn her on
@StereoSoundAgent For the most part i wouldn't put anything but OEM bmw parts on the body of the car,the fiberglass M style bumper is coming off and will be added to the pile of other cheap addons i've already removed from this car. I have a real oem M3 bumper sittin here plus i still have the original one that came with the car to change out come spring. And the 92 325 is kinda a relic compared to your 99 M3, so nothing to advanced like a clutch/ignition sensor or whatever. but my 03 s10 has it
@Neweraoutsourcing Thanks, hope ya find yourself a nice one. I'm also not huge on red my last two e36's were silver/gray and charcoal and my vw is drkblue, but when this one came along it was in such good condition i thought i'd give it a shot. hopefully my next e36 is a black M3
@Baschtian85 sometimes not being special is better than being confused. Your bipolar bmw doesn't know if it's a convertible or hardtop or even what model its trying to be. Mabey your car will figure out what it wants to be and mabey it won't but at least it'll keep itself amused with all it's going up, going down, going up again nonsense. Later
@Baschtian85 Dude, I saw your ride, yeah it looks good, but why not buy the real thing? It probably cost you more to pay for all that work than it would have to buy an actual e46.
By the way this "boring red e36" looks incredible, its a perfect example of true BMW power and in my eyes its better in every single way.
@Baschtian85 i believe your car falls in the special Olympics category, and you know what's better then placing first the special Olympics? Not being retarded. Seriously, lambo doors, air ride and a funny looking top. Cheeeeeeezzzzzyyyyy.
@Quanni90 So you think the car was wrecked and then rebuilt with later model fenders? Your wrong but also kinda right. If you look closer you'd notice marker light's placement on the fender is a little higher up than the oem marker position so your wrong on that(they're just smoked aftermarket fender indicators), but what really points out the car actually being in an accident is the slightly larger gap between the hood and grill.
@Quanni90 you know i can't really remember but i'm thinking i might have being it's the simplest solution. For now the car's covered and in winter storage but i'm gonna be ripping that whole front apart next spring and replacing the crappy fiberglass m3 bumper with a new oem m3 bumper that i've had siting around, mabey i'll have a better look at it then cause the gap really drives me nuts.
@AndreH5656 VW yes! i'm also into and own vintage vw's including a mk1 jetta coupe that i just swapped in a high compression euro spec 1.6l with 272 schrick cam & super sprint exaust that can easily out pull my bmw all day long. but its all good, my bmw tat,s on the other arm. i'd have a porsche tattoo but i just have to own one first
@panchitop619 spacers are just round pieces of billet aluminium to fit between the wheel and your hub(disk brake) to give a wider stance. 12mm spacers on back mean rolling fenders and stretching the tires a bit(225,s on 9.5inch rim), 8mm a must in the front to to keep inside of wheel from contacting the coilover,s.
I dont know about the rest of the world but the e30 was still produced in 1992 with the last ones coming out with a 2.7l evolution 2 325is. It had 155kw of power and the body was alluminium.
@BubbleboyJ here in north america the e36 starts from 06/92, so its seems we still had the e30 for the first half of the year but im not sure if we got the 2.7l evo in it?
@SKUSANWOLEK The exact same thing happend in SA. e36 was built from 06/92 but just before that they produced a very limited amount of completely aluminium body e30 325is. The reason for this was because the opel kadett superboss was kicking the evo1 ass at racing events and so they produced a faster version. You would not have the 2.7 if the e30 m3 was produced in your country. The e30 m3 never made it to our shores. all the m3s we have in the e30 are imported from north america:-(
@MrKaoVue the e36 started in 92 and went till 99. the e30 was discontinued in 91 except the convertible witch went till 92 then changed to e36 in 93. So if you bought a convertable in 92 it was e30 but if you bought a coupe or sedan that same year it was an e36. hope that clears it up for you
@randomNpointless the 325i is a very reliable car, just look up some info on maintenance and other issues for these cars, lots of info available as these cars have been around for awhile. The e36 m3 is also a great car and reliable but the parts are sometimes double the cost of the 325i, and the m3's s series engines were not really meant for real high milage, they are performance engineered to be fast and light weight, so try to find one with less than 80'000 km's
@quatroportte The car has aftermarket coilover suspension, no struts. What part of your strut were you hammering? Was it the spring perch? My last two e36's had aftermarket struts with lowering springs and had no prob running 18/40 and 17/45 tires and wheels. The only rubbing i get with this car is Wheel to fender because of it being so slammed and running stagered wheels with spacers.
@CcoxocC thanks, you can get the m style front bumper from ddm tuning its good, but don't buy the m style twist side skirts there. good M3 style side skirts aren't that cheap but they'll fit perfect and def stay put, even being this low or lower. Try bav auto,turner motorsports or beast power they might have them too.
Nice car !! I have the same,BMW 325is non vanos/92 (american model).Look at the sound of my car in STOCK in my videos,power filter is a nonsense for my opinion.Do you have chip to remove 206kmh ecu limiter?
@LUELMO thanks but i'm not sure what you mean by power filter,if its the air filter your talking about your right ive had nothing but problems with that short ram intake in my car and i'm thinking about going back to a stock air box. i've tried a couple different chips in my ecu but nothing yet to remove the speed limiter, do you know the name or # of that chip and were to get it ? the limiter is the only thing i hate about the car.
@SKUSANWOLEK Better STOCK AIR BOX, your power filter not well insulated of hot air. No original chips you have more o less for 50 euros in ebaymotors, usually all power chips remove ecu limiter,search copy of AC schnitzer
@SKUSANWOLEK I have the turner motorsport chip engineered by Jim Conforti for my car, I have read in many forums that it does indeed remove the top speed governer. If its 206 km/h stock, I can justify that I have indeed gone faster than that with the chip, so if your looking into another chip I'd suggest the TMC conforti one, its only about 250 bucks as well!
@SirYakToast Yes the Jim C chip seems like the only way to go, besides removing the limiter did you notice or feel any HP gains or higher rev limit with this chip? I'll keep my old jet performance chip in for now until i do the hot cam setup for the non vanos and then contact TMC about a custom Jim C chip for the new setup. But trying to find the schrick 256 intake cam for the non vanos is turning out to be a bit of challenge.
@SKUSANWOLEK in regards to your question about HP gains, I can say that this chip definetely adds noticeable power. Obviously any bolt ons that free up airflow such as exhaust / intake and other basics will compliment the chip. I wa thinkin about buying schrick cams for my car down the road, but for our non vanos motors i couldnt find any reliable information on the proper lift / duration for a racing cam. I remember readin 252 cams were thew way to go, but 256 seem to be the only ones avaialble
yea i just did a plug replacement and put in bosch coppers. a few of my ignition coils were a bit corroded and dirty looking along the rubber shaft so I was just asking to see if m3 coils might be an option if i wanted to replace. thanks for the info!
@SirYakToast i got the m3 coils for free of a buddy who had an extra set so i don't know what they cost new or used but i remember paying $100's each for stock bosh coils for my 318i, bav auto sells performance coils that are similar to the m3 coils and if your coils are toast you might as well upgrade just try to find a good used set if shopping for m3 coils. try bimmerparts up here in Canada in Duncan B.C. or bavarian auto recycling in california good luck man
@SirYakToast i got the wheels from bavarian autosport (bav auto) they are beyern mesh in silver made by tsw wheels. the inside of the front wheels hit the coilovers with out spacers(8mm at least) and i added 12mm on the back just to poke it out a bit. the performance of the coils depends on the cond of the motor and if you have the right ecu chip, also run the oem bosh copper plugs. I've noticed engine running better and a bit more throttle response feels a bit more torque too.
I love your fitment, I've bookmarked these specs to run on an E36.
OleDirtyBZA 4 days ago
Really beautiful and well looked after. Spray the front bumper grill black as well, will make the front look so much better and cleaner.
Gconry 5 days ago
@Gconry thanks, your right it would look better
SKUSANWOLEK 5 days ago in playlist Uploaded videos
Hey, I just bought a 92 E36 coupe just like this one but white. I love what you´ve done to this one, you have good taste.. Mine is not in very good cosmetic shape, but the engine is fine (that´s all I care about, I love the way it sounds). I already ordered the same rims you have there, an exhaust, intake, and I have to do a good paint job to make it look decent. The interior is in bad shape. Do you know a seller that has interior parts such as door panels, etc? thanks.
guillerod81 3 weeks ago
@guillerod81 Bavarian Auto Recycling has hundreds of used bmws & parts worth checking out, or u can try my guy up here in canada at Bimmer Parts he has a smaller but usually good selection and can ship worldwide. good luck with your project and don't forget about suspension. Note: e36's will always have that ugly front wheel gap unless you upgrade to coilovers
SKUSANWOLEK 3 weeks ago in playlist Uploaded videos
@SKUSANWOLEK excellent. thanks for the info
guillerod81 1 week ago in playlist Liked videos
Hey, What size Rims do you have on there? Also is that muffler stock or modded?
Driftster101 3 weeks ago
@Driftster101 No the muffler is not stock
SKUSANWOLEK 3 weeks ago in playlist Uploaded videos
Beatiful 325, I have 325is and 325i,but would not have been better in 17" those wheels?
LUELMO 3 weeks ago
@LUELMO 17"s look good at stock height but 18"s just seem to fit the body so nicely once its lowered
SKUSANWOLEK 3 weeks ago in playlist Uploaded videos
GORGEOUS
DibraEMadhePanorama 1 month ago
that is mint as, im saving up for my first car bmw e36 325is
TheFreddydawg 1 month ago
do u own a bmw , and livein a trailer? hehehhe nice car
heyITSmeWHATSupSON 1 month ago
@Bmwdonny honestly i really dont care for the color either, but i've tried to do what i can to make it work. The girls can stand in line all day long but my biggest challenge is actually stopping to let any of them in, just always having to much fun driving the damn things. And thats always been the best reason for owning bmw's, everything else is just a bonus.
SKUSANWOLEK 1 month ago in playlist Uploaded videos
the car looks fucking amazing!
omaifakingad 1 month ago
very original man i like that take care of that baby
Albert16babe 1 month ago
now that's an E36 with style!
MrYision 1 month ago
@SKUSANWOLEK: Very nice ride! I just bought a '95 325iC a couple months ago w/ 98K miles on it. It's pretty clean and original. I've been wanting to swap out the factory steering wheel because it just feels huge. Did you put that Momo on there or was it already swapped out when you bought it? I want to swap mine out with a Momo or other type, but afraid that I might get an airbag warning light or electrical problem by doing that. Any issues w/ yours?
superagent44 1 month ago
@superagent44 Soon as you disconnect the wheel or remove the front seats the SRS dash light will turn on and the only way to turn it off is using the SRS reset tool witch works on 95 or later models(obd2). You can buy one from peake research or just have your mechanic do it, witch ever is cheaper. My 92(obd1)is a little harder to reset but this was done before i got the car so i'm guessing the light was just disconnected when my wheel and M3 gauges were installed.
SKUSANWOLEK 1 month ago in playlist Uploaded videos
And take your valve cover off and have it powder-coated to the cars paint! SiiiiiiCK!
fortheLoveofuk 1 month ago
whats the stress bar brand?
BavarinMotorSportBMW 1 month ago
@BavarinMotorSportBMW You know, i get asked about that bar allot, but i don't have an answer because it was just part of the truck full of extra parts i got when i picked up the car . sorry, mabey i'l have to try to look it up
SKUSANWOLEK 1 month ago in playlist Uploaded videos
@SKUSANWOLEK ok well im completely jealous of your beautiful car. i have a little e36 325 but it needs loads of help and recomendations would be appreciated
BavarinMotorSportBMW 1 month ago
oops i meant what coilovers are you on? i posted a question about the rims but then i saw your answer in the video description..
rubberrice 2 months ago
@rubberrice its on KW variant 1's. check out my other vid for some shots of the coilover,s and install
SKUSANWOLEK 1 month ago in playlist Uploaded videos
Comment removed
rubberrice 2 months ago
How's the road noise on this car? and get you some fog lights.
rosahairsalon 2 months ago
@rosahairsalon I can't hear anything over the sound of exaust except the sound it makes scraping over speed bumps lol. "get you some fog lights"? WTF? you should get some fog lights is how it's said properly. Besides iv'e broken more fog lights that i can remember and i'm just sick of replacing them, fuck the fogs i don't need them anyways :P
SKUSANWOLEK 1 month ago in playlist Uploaded videos
@SKUSANWOLEK Thanks for the response, my 93 325is looks just like yours, same color, with tan interior, all windows are tinted, i use to have the same wheels you have until i got tire of all noise and the crap that goes with it,, i like mine as original as possible.
nice car thou. congratulations. And yes i do fog lights on mine.
rosahairsalon 1 month ago
Beautiful :))
Just wrong color :P
iRemixCJ 2 months ago
Perfect :D
StephaneLopes1 2 months ago
name of the song please,but car is very nice!!!!!
johny2504 2 months ago
@johny2504 song is called memorial by bring me the horizon
SKUSANWOLEK 2 months ago in playlist Uploaded videos 2
@SKUSANWOLEK What is the off set on the Beyern rims?? I know they are staggered 8.5 and 9.5 but i really like how your car sits and i just wanted to know the offset of the rims.
bmwgroetken 2 weeks ago
@bmwgroetken i cant remember the exact number and i think the fronts are diff than the back, somewhere between 35 and 43 i think. the backs were actually rubbing on the inside wheel well because of the high offsett, but nothing a set of spacers and a fender roller didn't fix. if you run coilovers the fronts will contact the springs so a 8mm spacer at least will need to be used with these wheels
SKUSANWOLEK 1 week ago in playlist Uploaded videos
Super nice clean E36, thats how they have to look. Congratulations !
Sc4tm4n 2 months ago
beautiful
amazing rims
dirkkan 2 months ago
very clean build! love that you kept the OEM styling and took every mod under consideration whether it was trashy or not. Also, its weird that you can turn you car on with just the key. my 99 M3 requires you depress the clutch while turning the key to turn her on
StereoSoundAgent 2 months ago
@StereoSoundAgent For the most part i wouldn't put anything but OEM bmw parts on the body of the car,the fiberglass M style bumper is coming off and will be added to the pile of other cheap addons i've already removed from this car. I have a real oem M3 bumper sittin here plus i still have the original one that came with the car to change out come spring. And the 92 325 is kinda a relic compared to your 99 M3, so nothing to advanced like a clutch/ignition sensor or whatever. but my 03 s10 has it
SKUSANWOLEK 2 months ago in playlist Uploaded videos
@StereoSoundAgent 1997+ models (US spec) got the clutch interlocks switch.
1D0N 2 months ago
BARDZO ŁADNE!!:))))very nice !!!!!!!
Damianosiso77 2 months ago
Love it, I'm getting one next year and outside of the colour I am looking at a similar setup...
Neweraoutsourcing 2 months ago
@Neweraoutsourcing Thanks, hope ya find yourself a nice one. I'm also not huge on red my last two e36's were silver/gray and charcoal and my vw is drkblue, but when this one came along it was in such good condition i thought i'd give it a shot. hopefully my next e36 is a black M3
SKUSANWOLEK 2 months ago
i´m sorry but that´s just a boring red e36 .... nothing special !!!!
Baschtian85 3 months ago
@Baschtian85 sometimes not being special is better than being confused. Your bipolar bmw doesn't know if it's a convertible or hardtop or even what model its trying to be. Mabey your car will figure out what it wants to be and mabey it won't but at least it'll keep itself amused with all it's going up, going down, going up again nonsense. Later
SKUSANWOLEK 3 months ago 6
Comment removed
xHeLLGuarDx 3 months ago in playlist Favorite videos
This has been flagged as spam show
@Baschtian85 Dude, I saw your ride, yeah it looks good, but why not buy the real thing? It probably cost you more to pay for all that work than it would have to buy an actual e46.
By the way this "boring red e36" looks incredible, its a perfect example of true BMW power and in my eyes its better in every single way.
xHeLLGuarDx 3 months ago in playlist Favorite videos
@Baschtian85 i believe your car falls in the special Olympics category, and you know what's better then placing first the special Olympics? Not being retarded. Seriously, lambo doors, air ride and a funny looking top. Cheeeeeeezzzzzyyyyy.
MrJasonfromcanada 2 months ago
Good car good video good music :)
RafaellM3 3 months ago
@RafaellM3 thanks
SKUSANWOLEK 3 months ago
must have been in an accident.... 92 325is's dont come with fender indicators
Quanni90 3 months ago
@Quanni90 So you think the car was wrecked and then rebuilt with later model fenders? Your wrong but also kinda right. If you look closer you'd notice marker light's placement on the fender is a little higher up than the oem marker position so your wrong on that(they're just smoked aftermarket fender indicators), but what really points out the car actually being in an accident is the slightly larger gap between the hood and grill.
SKUSANWOLEK 3 months ago
@SKUSANWOLEK i see! did you try the two spring loaded adjust pins under the hood?
Quanni90 3 months ago
@Quanni90 you know i can't really remember but i'm thinking i might have being it's the simplest solution. For now the car's covered and in winter storage but i'm gonna be ripping that whole front apart next spring and replacing the crappy fiberglass m3 bumper with a new oem m3 bumper that i've had siting around, mabey i'll have a better look at it then cause the gap really drives me nuts.
SKUSANWOLEK 3 months ago
perfect video to make anyone love a bmw e36.
ladiestreat27 3 months ago
:| sick :X
MrRwap 3 months ago
that fucker is sexy man doing a swap on minds now with the m3 motor
justin6500blk 3 months ago
OMG ur car is off the hook, big props!!!
carrier7676 3 months ago
this wheel is resistant ? because in brazilian streets is a piece of shit
AndreH5656 4 months ago
Volkswagen tattoo ? oh no! =/ BMW! VW no.
AndreH5656 4 months ago
@AndreH5656 VW yes! i'm also into and own vintage vw's including a mk1 jetta coupe that i just swapped in a high compression euro spec 1.6l with 272 schrick cam & super sprint exaust that can easily out pull my bmw all day long. but its all good, my bmw tat,s on the other arm. i'd have a porsche tattoo but i just have to own one first
SKUSANWOLEK 4 months ago
@SKUSANWOLEK Ok, if you say so.. hehe' i prefer bmw, here in brazil VW is so bad..
AndreH5656 4 months ago
@AndreH5656 is not important if VW or BMW. Just German Cars!
mmmetalrulezzz 3 months ago
@mmmetalrulezzz yes !
AndreH5656 3 months ago
beautiful! car man i have the same rims on my 93 325i how much did you get them for?
what are spacers? you say you have them on front and back
panchitop619 4 months ago
@panchitop619 spacers are just round pieces of billet aluminium to fit between the wheel and your hub(disk brake) to give a wider stance. 12mm spacers on back mean rolling fenders and stretching the tires a bit(225,s on 9.5inch rim), 8mm a must in the front to to keep inside of wheel from contacting the coilover,s.
SKUSANWOLEK 4 months ago
I dont know about the rest of the world but the e30 was still produced in 1992 with the last ones coming out with a 2.7l evolution 2 325is. It had 155kw of power and the body was alluminium.
BubbleboyJ 4 months ago
@BubbleboyJ here in north america the e36 starts from 06/92, so its seems we still had the e30 for the first half of the year but im not sure if we got the 2.7l evo in it?
SKUSANWOLEK 4 months ago
Comment removed
BubbleboyJ 4 months ago
Comment removed
BubbleboyJ 4 months ago
@SKUSANWOLEK The exact same thing happend in SA. e36 was built from 06/92 but just before that they produced a very limited amount of completely aluminium body e30 325is. The reason for this was because the opel kadett superboss was kicking the evo1 ass at racing events and so they produced a faster version. You would not have the 2.7 if the e30 m3 was produced in your country. The e30 m3 never made it to our shores. all the m3s we have in the e30 are imported from north america:-(
BubbleboyJ 4 months ago
@BubbleboyJ E30 M3 is my dream car, but thanks for the info on the aluminum body 2.7l e30 i'd like to get my hands on one of those too.
SKUSANWOLEK 4 months ago
yes they are depo
SKUSANWOLEK 5 months ago
Is that Depo headlights? Nice car!
Steeeewie 5 months ago
this is still a E36? even though its a 1992? man.. im confused, i thought only E36 where from 97-99 or so
MrKaoVue 6 months ago in playlist MrKaoVue's Favorited Videos
@MrKaoVue the e36 started in 92 and went till 99. the e30 was discontinued in 91 except the convertible witch went till 92 then changed to e36 in 93. So if you bought a convertable in 92 it was e30 but if you bought a coupe or sedan that same year it was an e36. hope that clears it up for you
SKUSANWOLEK 6 months ago
@MrKaoVue
if i am correct e36 is 1992-1999
jeckal91 5 months ago
Is this a reliable car because i want to get an M3 e36 sedan as my first car but everyone tells me maintenance is expensive?
randomNpointless 6 months ago
@randomNpointless the 325i is a very reliable car, just look up some info on maintenance and other issues for these cars, lots of info available as these cars have been around for awhile. The e36 m3 is also a great car and reliable but the parts are sometimes double the cost of the 325i, and the m3's s series engines were not really meant for real high milage, they are performance engineered to be fast and light weight, so try to find one with less than 80'000 km's
SKUSANWOLEK 6 months ago
@SKUSANWOLEK Thanks man i really appreciate ive asked everywhere and ur the first person to actually give me info.
randomNpointless 6 months ago
did you change your front suspension?or how did the 18inch rims with a 40 wall fit?
i have 17 inch with 45 and i had to hammer my struts a bit
quatroportte 6 months ago
@quatroportte The car has aftermarket coilover suspension, no struts. What part of your strut were you hammering? Was it the spring perch? My last two e36's had aftermarket struts with lowering springs and had no prob running 18/40 and 17/45 tires and wheels. The only rubbing i get with this car is Wheel to fender because of it being so slammed and running stagered wheels with spacers.
SKUSANWOLEK 6 months ago
beautiful e36
patryck0 6 months ago
what type of muffler is that? I have the same car in black.
yellowocean01 6 months ago
@yellowocean01 magnaflow
SKUSANWOLEK 6 months ago
what year is this car?
yellowocean01 6 months ago
@yellowocean01 1992
SKUSANWOLEK 6 months ago
Really Nice man <3
EndeL000 7 months ago
dude you started it without the clutch! nice.
yoeyoeyoeweeeeoo 7 months ago
@yoeyoeyoeweeeeoo obviously it wasn't in gear
SKUSANWOLEK 6 months ago
I there m8. Im getting a 325is soon and i was thinking what intake , srut bar and exhaust you have on your car. I hope u can aswer me.
Stormas3000 7 months ago
Keeping it slick i like it.
Where did you get the body kit?
CcoxocC 7 months ago
@CcoxocC thanks, you can get the m style front bumper from ddm tuning its good, but don't buy the m style twist side skirts there. good M3 style side skirts aren't that cheap but they'll fit perfect and def stay put, even being this low or lower. Try bav auto,turner motorsports or beast power they might have them too.
SKUSANWOLEK 7 months ago
0-60 12.7 seconds
planeman2233 7 months ago
Nice car !! I have the same,BMW 325is non vanos/92 (american model).Look at the sound of my car in STOCK in my videos,power filter is a nonsense for my opinion.Do you have chip to remove 206kmh ecu limiter?
LUELMO 8 months ago
@LUELMO thanks but i'm not sure what you mean by power filter,if its the air filter your talking about your right ive had nothing but problems with that short ram intake in my car and i'm thinking about going back to a stock air box. i've tried a couple different chips in my ecu but nothing yet to remove the speed limiter, do you know the name or # of that chip and were to get it ? the limiter is the only thing i hate about the car.
SKUSANWOLEK 8 months ago
@SKUSANWOLEK Better STOCK AIR BOX, your power filter not well insulated of hot air. No original chips you have more o less for 50 euros in ebaymotors, usually all power chips remove ecu limiter,search copy of AC schnitzer
LUELMO 8 months ago
@SKUSANWOLEK I have the turner motorsport chip engineered by Jim Conforti for my car, I have read in many forums that it does indeed remove the top speed governer. If its 206 km/h stock, I can justify that I have indeed gone faster than that with the chip, so if your looking into another chip I'd suggest the TMC conforti one, its only about 250 bucks as well!
SirYakToast 5 months ago
@SirYakToast Yes the Jim C chip seems like the only way to go, besides removing the limiter did you notice or feel any HP gains or higher rev limit with this chip? I'll keep my old jet performance chip in for now until i do the hot cam setup for the non vanos and then contact TMC about a custom Jim C chip for the new setup. But trying to find the schrick 256 intake cam for the non vanos is turning out to be a bit of challenge.
SKUSANWOLEK 5 months ago
@SKUSANWOLEK in regards to your question about HP gains, I can say that this chip definetely adds noticeable power. Obviously any bolt ons that free up airflow such as exhaust / intake and other basics will compliment the chip. I wa thinkin about buying schrick cams for my car down the road, but for our non vanos motors i couldnt find any reliable information on the proper lift / duration for a racing cam. I remember readin 252 cams were thew way to go, but 256 seem to be the only ones avaialble
SirYakToast 5 months ago
yea i just did a plug replacement and put in bosch coppers. a few of my ignition coils were a bit corroded and dirty looking along the rubber shaft so I was just asking to see if m3 coils might be an option if i wanted to replace. thanks for the info!
SirYakToast 9 months ago
@SirYakToast i got the m3 coils for free of a buddy who had an extra set so i don't know what they cost new or used but i remember paying $100's each for stock bosh coils for my 318i, bav auto sells performance coils that are similar to the m3 coils and if your coils are toast you might as well upgrade just try to find a good used set if shopping for m3 coils. try bimmerparts up here in Canada in Duncan B.C. or bavarian auto recycling in california good luck man
SKUSANWOLEK 9 months ago
love those wheels man whered you get them? and what does adding m3 ignition coils do in terms of performance?
SirYakToast 9 months ago
@SirYakToast i got the wheels from bavarian autosport (bav auto) they are beyern mesh in silver made by tsw wheels. the inside of the front wheels hit the coilovers with out spacers(8mm at least) and i added 12mm on the back just to poke it out a bit. the performance of the coils depends on the cond of the motor and if you have the right ecu chip, also run the oem bosh copper plugs. I've noticed engine running better and a bit more throttle response feels a bit more torque too.
SKUSANWOLEK 9 months ago