You watch this video and then you realize what all the younger generation of people missed out on... a great runnin tractor. on my farm we have 2 6080's a 7045 and a 170 and soon to be a 7080
I dont know how I can miss my allis chalmers any when I farm now. I started with a 7060 with duals and a Gleaner F. I now run deeres. I almost bought a gleaner last year just for fun.
great video! i have 3 D17's a project WC, 200, 7010, 7020, 8070, and a 5020, we also have a 98 Gleaner R52 which is a great combine!! nothing beats an allis chalmers!! Someday i hope to own a 4W-305, D21 and a 7080
@magnaflowedramx4 Yes i think so the only limiting factor might be weight we have a 3 bottom plow for our D17 and its a decent load on a tractor with weights... The WD 45 and the D17 actually had about the same 226ci motor in them so yes i believe that the same plow could be used on a WD45. I don't know if you are familiar with the Snap Coupler hitch that many of the earlier D17's had but i think some plows were pulled with those and a WD45 had that system too they were a very similar tractor!
I grew up with an old WC Allis Chalmers out in Uvalde County, Texas. I can open my desk drawer right now and show you the head end of a valve that broke off of the stem and rattled around in the cylinder chamber for a few seconds before I could get it shut down. The only thing that I have left is that old valve head. Makes a darn good paper weight now.
just today i finished fixing up my family's 1950's allis chalmers WD. we still use our wd45 to till the fields. finishing up the fields around 9 at night coming back to the house at night and the exaust manafold glowing red and flames coming out the stack. such a great tractor
Thanks for this video, even though there are probably more pictures than actual tractors-the older ones that is, I still am thrilled to see them. AC was all my dad and grandpa ever used and many or these tractors are a lot newer than what they had, I like seeing them. When I could finally push the clutch all the way in was when my dad let me start driving. I was 9 or 10 at the time and had a tight hold on the steering wheel, stretching my leg as hard as I could. Yes, I was a tomboy,no regrets!
I have great respect for the D21 II and the 210 220 tractors, from there it doesn't really matter. Neighbor had a 7060 that was apart more than it ran and an L2 that ate the feeder house chains within the first hour off the truck new!!
7060 had no seal on the air filter & it never really recovered from that. he wanted another machine but they wouln't go. after the L2 incident he went (yuke) blue tractor green combine. I liked the 7060 and the trans setup but he couldn't keep one end or the other together on the mtr. bottom then top, back & forth. truly, I miss the days of manufacturers besting one another, now they rip u blind keeping this good old stuff on the job.
@thegreenerthemeaner That's not typical. I love my 7050 and L2. Both great machines and have hardly done a thing to the 7050 in the 15 years I've been running it. The L2 I bought last year and the raddle chain went through harvest fine. Sound like your brother had bad luck with that 7060. My buddy's Dad got a 7060 new when he couldn't get a Deere at the time (70s tractor shortage). he loved it and then bought an M2. He was all Deere before then. Problem today is no dealerships. Stupid AGCO!
My brother has a AC 7060. It was sold to South Africa but is now in the Netherlands, Europe. The tractor needs some repairs but he has no time to do that. I think he MUST make some time to do that.
I work across the street from the old factory in West Allis and all that's left is a cheesy plaque. Someone needs to make a monument with an actual tractor on it and a history of why they failed. Allis Chalmers' history is one repeated all to often in Wisconsin industrial history.
I'm a Massey Ferguson guy, but I have alot of respect for A-C. Agco really needs to bring them back. A little G with some cultivators is just what my garden needs. Great video!!
I have a Allis-Chalmers tractor. Its a smaller one and it doesn't sit as high as all the ones in these pictures. It's a 1984 i believe. This thing sat for like 3 years because it needed a new front tire and we didn't really need it. It literally fired up within 30 seconds of turning over!!
You watch this video and then you realize what all the younger generation of people missed out on... a great runnin tractor. on my farm we have 2 6080's a 7045 and a 170 and soon to be a 7080
Allis7045 4 days ago
I AM I ALWAYS WILL BE ALLIS CHALMERS FOREVER I have a 1967 d15 series 2 my pride........
assfailure123 7 months ago in playlist all
Nice
velicu1000 7 months ago
I dont know how I can miss my allis chalmers any when I farm now. I started with a 7060 with duals and a Gleaner F. I now run deeres. I almost bought a gleaner last year just for fun.
blakelyfreddie 9 months ago
@blakelyfreddie
seedbox100 2 months ago
@abc123bengi it sure looks like a 7000 series tractor with a different grill
aglbwest 11 months ago
whats the tractor at 1:31?
fireburst102 11 months ago
what model is the tractor at 1:11 ?
aglbwest 11 months ago
@aglbwest I cant really tell.. but it looks like it says Agco Allis on the side
abc123bengi 11 months ago
@aglbwest
that is a 7000 series tractor prototype, when they were determining a paint-decal scheme. most of the tinwork looks production, except the grille.
rborneman 10 months ago
my dad had a one-ninety xt. great tractor
cragar92 1 year ago
that 7080 at 3:25. does it have front wheel assist?
lesandstone 1 year ago
I just realized upon watching this again that i have the exact same sign displayed at about 16 seconds in
allischalmersforlife 1 year ago
nice sounds like john fogerty :P lovley video allis chalmers will always be the best american machines
TheTractormaster 1 year ago
guys my b is for sale, im looking at a w-d, one day when im at least 14 im gonna get a d-21
lildjohnson95 1 year ago
great video! i have 3 D17's a project WC, 200, 7010, 7020, 8070, and a 5020, we also have a 98 Gleaner R52 which is a great combine!! nothing beats an allis chalmers!! Someday i hope to own a 4W-305, D21 and a 7080
goraczkowski 1 year ago
@goraczkowski For many years, An uncle of mine ran a D-17 pulling a 3-bottom
plow. The tractor was eventually sold to a restorer. Could this same 3-bottom plow be used on WD45 ? Thank-you
magnaflowedramx4 1 year ago
@magnaflowedramx4 Yes i think so the only limiting factor might be weight we have a 3 bottom plow for our D17 and its a decent load on a tractor with weights... The WD 45 and the D17 actually had about the same 226ci motor in them so yes i believe that the same plow could be used on a WD45. I don't know if you are familiar with the Snap Coupler hitch that many of the earlier D17's had but i think some plows were pulled with those and a WD45 had that system too they were a very similar tractor!
goraczkowski 1 year ago
@magnaflowedramx4 my guess would be yes...but that is just from what i read
abc123bengi 11 months ago
@magnaflowedramx4 my guess would be yes...but that is just from what i read. no personal experience
abc123bengi 11 months ago
I been looking for a CA Allis Chalmers,,but three weeks ago bought a 1949-B
1941pearl 1 year ago
we got a 7580 185 and a 5050 that just go forever!!
rabbit30997 1 year ago
we have a 7080 and it is going on and on !!!!!!
bumwhisenant1 1 year ago
i like seeing all of these 4wd's instead of the run of the mill wd's and d7's in everybody's fencerow
purduedude10 1 year ago
I grew up with an old WC Allis Chalmers out in Uvalde County, Texas. I can open my desk drawer right now and show you the head end of a valve that broke off of the stem and rattled around in the cylinder chamber for a few seconds before I could get it shut down. The only thing that I have left is that old valve head. Makes a darn good paper weight now.
TheTexn 1 year ago
just today i finished fixing up my family's 1950's allis chalmers WD. we still use our wd45 to till the fields. finishing up the fields around 9 at night coming back to the house at night and the exaust manafold glowing red and flames coming out the stack. such a great tractor
dealincraic 2 years ago
Thanks for this video, even though there are probably more pictures than actual tractors-the older ones that is, I still am thrilled to see them. AC was all my dad and grandpa ever used and many or these tractors are a lot newer than what they had, I like seeing them. When I could finally push the clutch all the way in was when my dad let me start driving. I was 9 or 10 at the time and had a tight hold on the steering wheel, stretching my leg as hard as I could. Yes, I was a tomboy,no regrets!
survivrs 2 years ago
I have great respect for the D21 II and the 210 220 tractors, from there it doesn't really matter. Neighbor had a 7060 that was apart more than it ran and an L2 that ate the feeder house chains within the first hour off the truck new!!
thegreenerthemeaner 2 years ago
well a John Deere dealer must have done somethin to your nebors 7060 and his L2!!!!!!
ACD19farmboy 2 years ago
7060 had no seal on the air filter & it never really recovered from that. he wanted another machine but they wouln't go. after the L2 incident he went (yuke) blue tractor green combine. I liked the 7060 and the trans setup but he couldn't keep one end or the other together on the mtr. bottom then top, back & forth. truly, I miss the days of manufacturers besting one another, now they rip u blind keeping this good old stuff on the job.
thegreenerthemeaner 2 years ago
@thegreenerthemeaner That's not typical. I love my 7050 and L2. Both great machines and have hardly done a thing to the 7050 in the 15 years I've been running it. The L2 I bought last year and the raddle chain went through harvest fine. Sound like your brother had bad luck with that 7060. My buddy's Dad got a 7060 new when he couldn't get a Deere at the time (70s tractor shortage). he loved it and then bought an M2. He was all Deere before then. Problem today is no dealerships. Stupid AGCO!
SilverGleaner 1 month ago
My brother has a AC 7060. It was sold to South Africa but is now in the Netherlands, Europe. The tractor needs some repairs but he has no time to do that. I think he MUST make some time to do that.
spiekerbukse 2 years ago
I work across the street from the old factory in West Allis and all that's left is a cheesy plaque. Someone needs to make a monument with an actual tractor on it and a history of why they failed. Allis Chalmers' history is one repeated all to often in Wisconsin industrial history.
sbukosky 2 years ago
what are the names of those 2 songs?
polarisam 2 years ago
the first one is looking out my back door by CCR and the second one is fortunate son by CCR
abc123bengi 2 years ago
my grandpa had a gleaner l2. Im a case man by i respect gleaners ive ran one before and it'ill beat the hell out of a deere
caseman1134 2 years ago
those 7000-7080 were bullet proof tractors, my buddy has a 7010, and a 7045. i got an old little wc
700wildcat 2 years ago 3
@700wildcat
oh yeah wats your buddies name i know a guy who has the same two
OrangepowerD21 1 year ago
This has been flagged as spam show
@OrangepowerD21 his last name is Waterman, send me a private message if you want me to tell you more
700wildcat 1 year ago
ALLIS CHALMERS FOREVER
allischalmersforlife 2 years ago 10
@allischalmersforlife agreed wd r good
SuperSlipman1 1 year ago
@allischalmersforlife
orange power 4 ever :P
TheTractormaster 1 year ago
I'm a Massey Ferguson guy, but I have alot of respect for A-C. Agco really needs to bring them back. A little G with some cultivators is just what my garden needs. Great video!!
FergusonTO35 2 years ago
I have a Allis-Chalmers tractor. Its a smaller one and it doesn't sit as high as all the ones in these pictures. It's a 1984 i believe. This thing sat for like 3 years because it needed a new front tire and we didn't really need it. It literally fired up within 30 seconds of turning over!!
Geck90 3 years ago
Now we have Kubota, Manhidra, Kioti, and Belarus. What a country!
EZ570 3 years ago
Thanks for all the Views, Good Comments and Ratings!!!
abc123bengi 3 years ago
LONG LIVE THE AC!
AirSOFTLOVER12 3 years ago 2
love the WD45
sabrefirefighter 3 years ago 2
great video I love Allis-Chalmers!!!!!
ACD19farmboy 3 years ago