RC UAV Drone 98" Wingspan * Built & Ready-to-Fly * w/ FPV Camera installed

[cochise7969]

This is so sick!

[TheStevenatorz]

so the video does it just record or does it do real time like you see what its seeing like in the military

[nitroplanes]

@TheStevenatorz There is camera systems that will give you real time video and some is just record and then play back. So it all depends on what camera system you use.

[TheStevenatorz]

@nitroplanes how much does that camera cost

[nitroplanes]

@TheStevenatorz Depends which one you get but most of them is several hundred dollars.

[FeWolf]

actually I would like to know where to get it

[nitroplanes]

@FeWolf The item is listed on our website and the item number is PROJET-DRONE-2500MM-Kit

[legendnemesis]

@nitroplanes how much will it cost me ?

[nitroplanes]

@legendnemesis The airframe cost about $125 before shipping and then you will still need the electronic to make it fly. The price of the electronics can vary between what you get.

[legendnemesis]

@nitroplanes ok i'll check it further on your website but tell me can we see the live video on a screen or laptop at the ground and secondly how much does the shipping cost out of the country ?

[nitroplanes]

@legendnemesis There is camera systems that is able to give you real time video but those systems are usually some what expensive. Shipping out of the country would be quite expensive too. We don't ship this item out of the lower 48 states because the item is so big and it can get damaged during transit. If you want to ship this out of the country you will need to ship it to you location in the states and then find a carrier to send it to the final destination.

[legendnemesis]

@nitroplanes oh ok .......thanks for the information ....and can you tell me the name/model number of the camera system that can give real time video suitable for these type of planes?

[nitroplanes]

@legendnemesis We use to sell a real time camera system, and we had it for about $999.00. This is the item number for it PilotVision_Combo-11

[legendnemesis]

@nitroplanes thanks that was really helpful :)

[sjpictures]

and what is the range of it

[nitroplanes]

@sjpictures The range of the drone depends on the radio that you use on it. So if you use a 2.4ghz radio you can pretty much fly the plane as far as your eye can see.

[sjpictures]

Is it a live Video feed or just recorded



[FeWolf]

wondering if you could convert to gas?

[MebeVeejay]

UAV online

[otowise]

Can you control this with a laptop?

[neonbluen851]

our uav is online

[n5iln]

Dear Santa...

[zibiz100]

IM SORRY HOW MANY POUNDS OF TOTAL WITH ALL INSTALLED WEIGTH???

[BIGISLANDAIRSOFT]

How do you see the film? fromm the drone is it on the remote, or like a separate monitor?

[isaacmagovero117]

I'm confused,is theres a camera on the drone.if there is,are you able to see where your going on the remote.like is there a little screen on the remote.or does it just record where your going. ??????

[arielwollinger]

OMG, the cameraman has parkinson sindrome!

[VeteranAirsoft]

what did come in the package was it a kit or an arf or rtf?

[metaknight95]

@VeteranAirsoft ARF

[johnnydrack1]

yo were u buy the uav tell yo

[rnakata808]

i wanna get this put some miny model rockets loaded with those one time used engines hook up an arduino and use it to fire the rockets and get it shoot down by the military

[marwano1223]

AWSOME!! put some firecrackers so that it'll act ;like a predator missile!

[dishizo]

What kind of flight characteristics does this plane have? It looks like it needs to maintain a good speed to stay aloft... You said you changed the motor, What kind of motor and how does the plane react? I am looking into one of these, and no one has one at my hobbyshop to ask :D

[edescrambler]

i have some questions about this model.

How many time you can flight without change battery ?

has any chance to be hand launched ?

sorry for my poor english

[emmetgb]

@edescrambler dont i think it last 8 hours and no you cant hand laungh but you can take it of grass i think. o and your english is not poor

[JFCalvano]

@versitaley. Good luck!

[versitaley]

the shaft is smooth

[unfairtrout]

@versitaley lol

[JFCalvano]

What make motor? Have you tried turning the motor around (pushing the shaft through the other side)? I had to add spacers inside between the mounting plate and motor because I wanted to reduce the gap between the fuselage and spinner. Still no maiden flight yet.

[versitaley]

@JFCalvano found out my motor was to small, I have the right one now and its a little more than I need but it will do the job

[Vaslet21]

@versitaley what motor did you get for it?

[versitaley]

@Vaslet21 I got an Eflite Park 480, the only thing is it's an outrunner. Do you know of any inrunner that may work?

[versitaley]

@Vaslet21 sorry I have been away for a while...I bought the EFlight Park 480

[bimbox15]

airsoft uav

[JFCalvano]

Just finished building my own. Running a Power 25 w/ 12x6 prop using the new DX8. No maiden flight yet, but it's a great looking plane. Thanks for the videos!

[versitaley]

@JFCalvano I am building mine now, but I need a little help with the motor instalation, I bought an outrunner motor but the shaft is to short for the prop, any sugestions?

[catamaranman333]

@versitaley is the shaft threaded or smooth?

[SuperScguy]

is it hard to fly and who would you recomend it to

[comeinlaugh]

Cool.May I ask how much these are?

[GEOCA123]

@comeinlaugh i payed like 300 or 400 usd

[Sexomaniakos4ever]

Men, I hate you... Its beautiful.. What a a doll!!

[iscozky]

What's the power set up?

[blackviper15]

when u buy it do u have to buy anything else for it to fly?

[torcsip]

Hello

Congratulations. The flying and the airplane are beautiful.

It is possible to ask it what the accurate configuration ?

[poerik]

flaps are cool ..

nice vid

grtzzzz

[miGsKills]

Smooth lander! Pretty cool stuff. . .

[startazz]

Yet another good flight video Dave (nightflyyer) thumbs up