i have a friend who detonated a ford 9" at the launch and oiled the whole track down. he went with a curry axle after that cause its alot stronger than factory 9"
Actually looked like some good driven too. Appeared the guy was quick enough to get on the brakes before the nose hammered the wall. Seemed to slow real quick there in the last few feet.
@Resulant32 Actually it was ment to be funny. Usually we use this phrase to express somebody to be nuts. An english version is: "You got a screw loose!". The same phase exists also in german ("Du hast 'ne Schraube locker!"), by the way. It can be used to express despite but also for (indirect) recognition or just kidding. It's always a matter of the context.
At least the driver suffered no injuries and the car should've been able to be rebuilt. Still unfortunate to put all that hard work in preparing your car to be able to do what you love, only to have the axle break. Poor guy - or gal!
um no its not shredded tire its fucking sheared wheel studs it happends when a drag car does to much of a burn out an they take off it shears the studs
The title of the video says "Pro Stock Shootout." When I think of pro stock, I think drag racing. But, considering your evident dislike of drag racing, a little ignorance should be expected.
And by the way, if you don't think drag racing takes skill, why don't you post a video of you trying to drive a Top Fuel dragster to over 300 mph in less than 4 seconds?
It should be simple, you don't even have to shift!
Just a reminder, here's what I wrote in my previous reply:
"And by the way, if you don't think drag racing takes skill, why don't you post a video of you trying to drive a Top Fuel dragster to over 300 mph in less than 4 seconds?
It should be simple, you don't even have to shift!"
If you don't agree that piloting a Top Fuel dragster to speeds and times as mentioned above, than your biased opinion of motorsports is not valid.
Do I think drifting takes skill? Absolutley! The pros are some of the most talented drivers out there. However, do I watch drifting competitions on TV or attend events?
No. I don't enjoy it. At ALL! But, the little I have seen, I recognize the skill it takes to "drift" high performance race cars around the track like that.
But to not recognize the skill to blaze down the 1/4 mile, 1000 foot now, at 300 mph is just plain ignorant.
Thats was Russ Jung of Jung Performance out of Ft Lauderdale Give 'em a call and ask him what happened That was at Moroso Motorsports Park which is now named Palm Beach International Raceway
Great save. Very little body damage too. New rear end, repair ladder bars, little message of the quarter, good as new. I bet they were back racing in the next round.
Considering how hard they're coming out of the hole, he did a great job of stopping it so quickly. I thought he was going to seriously mess up the front end of that RS. Well done man!
camaroz2881666 you stupid its not a powerful block its a weld and an american car!!! you will never see that kind of shit on japanese cars cause the are hella powerful and well made
@MagikDick Japanese cars can and do have just as much power as vehicles like that. You don't see them lose their rear wheels because the cars are built much better, and probably not race prepped by rednecks, such as the case with this vehicle.
Really what fucking Japanese car has 2,000 -3,000 HP, you let me fucking know. I've only seen one Eclipse with like 1800 or something, which set the world record for fastest Import, so your talking right outta your ass.
Impressive but still, the not faster than the eclipse I'm speaking off, and have you seen PRO MODS? Those things do 3-4 Sec 1/4 mile. And it's all muscle!
And sorry to tell you but Mazda your talking off has no more than about 1600 HP.
@2pimpinout LOL The reason Japanese cars do not do that is LACK OF TORKE AND LACK OF REAR TRACTION.
Your "toy" cars do not have enough mass and power to even strain your parts... I hope you understand that before continuing talking things you do not know about.
i think you are an other japanese import lover or ford mustang gay lover .... the wheel break because its a gm block with real power.... go play with yourself in your made in japan car.... you are a mistake ....
Time to purchase some c clips! Yeah he snapped an axel! I have had this happen before, but if you have the right rear you can stop this from happening! I almost took out the tree when it happened! The wheel went further than I did!
i have a friend who detonated a ford 9" at the launch and oiled the whole track down. he went with a curry axle after that cause its alot stronger than factory 9"
cbr900rr919 7 months ago
Actually looked like some good driven too. Appeared the guy was quick enough to get on the brakes before the nose hammered the wall. Seemed to slow real quick there in the last few feet.
SixSpeedSS 8 months ago
torque = win
metalero19882 11 months ago
I like the part where his wheel fell off.
phillymetalhead 1 year ago
made in china
DelighT112 1 year ago
better that the wheel came off at the beginning than at top speed.
mikester9er 1 year ago 3
We germans would comment an accident like this with: "Der hat doch ein Rad ab!"
In english: "This guy has got got a wheel loose!"
TheBigTittyTwister 1 year ago
@TheBigTittyTwister
=D der spruch passt
Fasesure93 1 year ago
@TheBigTittyTwister ROFLOL!!!! man im sorry but i dont know if you were being funny or not but that was freakin hilarious
Resulant32 8 months ago
@Resulant32 Actually it was ment to be funny. Usually we use this phrase to express somebody to be nuts. An english version is: "You got a screw loose!". The same phase exists also in german ("Du hast 'ne Schraube locker!"), by the way. It can be used to express despite but also for (indirect) recognition or just kidding. It's always a matter of the context.
TheBigTittyTwister 8 months ago
At least the driver suffered no injuries and the car should've been able to be rebuilt. Still unfortunate to put all that hard work in preparing your car to be able to do what you love, only to have the axle break. Poor guy - or gal!
refusetoassimilate 1 year ago
um no its not shredded tire its fucking sheared wheel studs it happends when a drag car does to much of a burn out an they take off it shears the studs
Corbin4538 1 year ago
darg raceing sux
i mean really they just go straight and switch gears
try drifting for once
asifh13 1 year ago
@asifh13
Then why are you watching drag racing vids?
rootypootooty 1 year ago
@rootypootooty dis waznt a drag race vid
it was about da car loseing its wheel
asifh13 1 year ago
@asifh13
The title of the video says "Pro Stock Shootout." When I think of pro stock, I think drag racing. But, considering your evident dislike of drag racing, a little ignorance should be expected.
And by the way, if you don't think drag racing takes skill, why don't you post a video of you trying to drive a Top Fuel dragster to over 300 mph in less than 4 seconds?
It should be simple, you don't even have to shift!
rootypootooty 1 year ago
@rootypootooty u know wat fuck this video
lets talk about cars here
u think that drag raceing is hard
well i do think the guys puts alot of works to their cars
but its not that hard to shift gears and go strait
but its harder to do quick turns and corners
asifh13 1 year ago
@asifh13
Just a reminder, here's what I wrote in my previous reply:
"And by the way, if you don't think drag racing takes skill, why don't you post a video of you trying to drive a Top Fuel dragster to over 300 mph in less than 4 seconds?
It should be simple, you don't even have to shift!"
If you don't agree that piloting a Top Fuel dragster to speeds and times as mentioned above, than your biased opinion of motorsports is not valid.
rootypootooty 1 year ago
@asifh13
Do I think drifting takes skill? Absolutley! The pros are some of the most talented drivers out there. However, do I watch drifting competitions on TV or attend events?
No. I don't enjoy it. At ALL! But, the little I have seen, I recognize the skill it takes to "drift" high performance race cars around the track like that.
But to not recognize the skill to blaze down the 1/4 mile, 1000 foot now, at 300 mph is just plain ignorant.
rootypootooty 1 year ago
@rootypootooty look i know all the motorsports takes skill
but im just saying drag raceing sucks cuz some ppl think that drag raceing is da best and they only think american muscles are the best
i didnt mean that drag raceing really sux
we cool now??
asifh13 1 year ago
@asifh13
We're cool. Weird, this is the first time I've concluded an internet arguement without someone dropping multiple f-bombs and homophobic slurs.
Refreshing.
Later.
rootypootooty 1 year ago
@rootypootooty well ppl r different
asifh13 1 year ago
fuck jap cars. its all about american muscle
sk8r4life206 1 year ago
Thats was Russ Jung of Jung Performance out of Ft Lauderdale Give 'em a call and ask him what happened That was at Moroso Motorsports Park which is now named Palm Beach International Raceway
southfla72 1 year ago
Great save. Very little body damage too. New rear end, repair ladder bars, little message of the quarter, good as new. I bet they were back racing in the next round.
jessemas27 1 year ago
Good thing he wasnt doin 100mph down the track when that happend.
gtrefghuk 1 year ago
ahaha he ripped out his entire hub, fuckin awsome.
joey6062 1 year ago
This kinda stuff is very common with a chevy to loose bolts tires mufflers trannys hoods etc .
most chevys must be restored to factory specs within 20k of new .
There nothing like a Ford or Dodge product .
Most chevy parts can be purchased at your local auto wreckers and cost maybe 80 dollars for a complete restore .
Lotum4n 1 year ago
@Lotum4n
u are a dumbass.. like you cant buy ford and dodge and every other car part at a yunkyard.. what a moron..
20k.. hahah. ur a tool bro.. now go die. lmao
MrGstock 1 year ago
I think he pulled what my friend did and snapped the axle at the wheel
Joe198969 1 year ago
must h?ave missed "lug nut day" at school lol j/k good save though!
bigeasyone 2 years ago
It fell off. It fell off! It fell the f**k off! LOL.
jraintdead 2 years ago
Considering how hard they're coming out of the hole, he did a great job of stopping it so quickly. I thought he was going to seriously mess up the front end of that RS. Well done man!
robkal56 2 years ago
camaroz2881666 you stupid its not a powerful block its a weld and an american car!!! you will never see that kind of shit on japanese cars cause the are hella powerful and well made
2pimpinout 2 years ago
nip cars are fucking gay way worse than american cars bitch
juniorracer1995 2 years ago
wrong! you never see that on a Japanese car because they do not have enuff power to do that.
MagikDick 2 years ago 20
@MagikDick Japanese cars can and do have just as much power as vehicles like that. You don't see them lose their rear wheels because the cars are built much better, and probably not race prepped by rednecks, such as the case with this vehicle.
All this aside, damn that's a lot of torque xD
BanditOMG 1 year ago
@BanditOMG The best working tracks are prepped by what you would consider "rednecks". Don't make ignorant comments such as that.
DrewCFYA 1 year ago
@MagikDick yep because this happends eveyday on mopars. and for your information. there is japanese cars with way moore HP than this prostock.
swedishmans 1 year ago
@swedishmans
Really what fucking Japanese car has 2,000 -3,000 HP, you let me fucking know. I've only seen one Eclipse with like 1800 or something, which set the world record for fastest Import, so your talking right outta your ass.
Roger0416 1 year ago
@Roger0416
watch?v=xGhorgniFzA
swedishmans 1 year ago
@swedishmans
Impressive but still, the not faster than the eclipse I'm speaking off, and have you seen PRO MODS? Those things do 3-4 Sec 1/4 mile. And it's all muscle!
And sorry to tell you but Mazda your talking off has no more than about 1600 HP.
/watch?v=oHv_jKJVQ-Q
/watch?v=qDenHMMkGMo
Please, get your head outta your ass!
Roger0416 1 year ago
@Roger0416
thoose vids you showed me was 1/8...
its top fuels who does 1/4 on 4 sec.
and sry man i mby choose a stupid way of saying that there are faster imports than this... i just wanna make it easy by writing more Hp..
swedishmans 1 year ago
@swedishmans
My point is, the best of muscle beats the best of import as you your self just stated :
"its top fuels who does 1/4 on 4 sec."
No Import runs 4 sec 1/4's...
Anyways, cars are all personal preference buddy, we could argue for ever and we will never change each others minds.
See ya!
Roger0416 1 year ago
@MagikDick twin turbo inline 6 supras bro
robthatguyx 2 months ago
@2pimpinout LOL The reason Japanese cars do not do that is LACK OF TORKE AND LACK OF REAR TRACTION.
Your "toy" cars do not have enough mass and power to even strain your parts... I hope you understand that before continuing talking things you do not know about.
Etorresdeltoro 2 years ago
you call plastic and 60 horses wellmade and powerful. dumb as hell
85montess100 2 years ago
is the wheelie bar attachd to the axle?
bubub56 2 years ago
yup
85montess100 2 years ago
Comment removed
russell379x 2 years ago
@russell379x
I didnt see an axle atached tot he wheel
TestaVette 2 years ago
well then he sheered the studs off....and they do brake at the flange too
russell379x 2 years ago
i hope the front end didn't get screwed up at all
Andyman395 2 years ago
Look's like another case of Bird shit welding .
Lotum4n 2 years ago
lol
MiniTruckin05 2 years ago
OOPS! LOL!
BigFordFan1995 2 years ago
lucky it happend at start
SupremeDutchman 2 years ago
thats not pro stock
Scarfman300 2 years ago
he either broke an axle of sheared off the wheel studs. either get C-clip elimnators
or bigger studs
pfcjamesmp 2 years ago
Thats a big tire
IxBroncosxI 2 years ago
Comment removed
392g 2 years ago
Shut the fuck up 392g.
zunetrav4 2 years ago 2
i think you are an other japanese import lover or ford mustang gay lover .... the wheel break because its a gm block with real power.... go play with yourself in your made in japan car.... you are a mistake ....
camaroz2881666 2 years ago
and that wheel went on to win the race and the prize money..
I'm kidding for the people who dont have a sense of humour...
AussieHoon 2 years ago 2
Time to purchase some c clips! Yeah he snapped an axel! I have had this happen before, but if you have the right rear you can stop this from happening! I almost took out the tree when it happened! The wheel went further than I did!
nudetube2 2 years ago
Definitely snapped the axle at the housing... you can still see the rotor attached to the wheel indicating the wheel studs are intact.
1320in8 2 years ago
i wonder if the tire made it all the way down
wilbertm94 2 years ago
He sheared the wheel studs.
67kickingbird 2 years ago
this could be a southwestern commercial
"Wanna get away?" lol
icool247 2 years ago
lol.
CasperAtown 2 years ago
lololololol
thats a really good one
wilbertm94 2 years ago
holy fucking horse power....
demonsparkx 2 years ago
Super good hooking to break an axle so veolently. LOTs OF FUCKIN POWER (lofp)
gc302047 2 years ago
Cheap rear and axels!
nudetube2 2 years ago
Didnt Shred a wheel it broke an axle
Holocaust429 2 years ago
cool! (btw that was at launch)
juniorracer1995 2 years ago
Oh shit firestones lmao
platano12356 3 years ago
got in a hurry and left his tire on the line.
ezcondition 3 years ago
Very lucky!
Baronof92 3 years ago
That is why they make full floating hubs/axles.
Lucky man all the same.
1969crapi 3 years ago
SOOOOO LUCKY!!! i have seen that exact same thing tear a quarter panel off
route66boy 3 years ago
looks like a broken axle to me
hotrod3555 3 years ago 11
rite at the flange
smallblockman1 3 years ago
thats just somebody not torquing the wheels before the run...hes lucky thats all that happened.
elusiveiceman1 3 years ago
it broke axle at the housing
camaro4542u 2 years ago
LOL!!!!!! that would be in barising have one of my wheels just fly off LOL!!
dragking02 3 years ago
wheelie bar saved the bottom of the car
SHAWEAGLEBOI 3 years ago
looks like someone forgot their torque wrench
eric62backstrom 3 years ago
fucking funny! lol that was like puff bye bye wheel lmao!!
but yet i feel sorry for the owner since it was a nice ride..
UNiqEz 4 years ago
sorry it happened. good thing it didn't break on the other end!!!!!
svo65 4 years ago
lol line him up again he has a whellie bar to keep the car going
magnetman119 4 years ago
I missed the shred part. I only saw the wheel break off. Darn.
falcon8r 4 years ago
love that car! but tire? well it was huge, but is the point of the weel to fall of like that? lol, love the video, and again LOL!
zxxtra 4 years ago
lmao nice lol
d1damo 4 years ago
2 fast 4 u
tiloky 4 years ago
well, atleast he didnt hit the wall lol
somekid13 4 years ago
hahahahahah oopsie
sickistrides 4 years ago
running to small of a hub
mattsworldus 4 years ago
were they racing pinks?
volcomme9 4 years ago
the engine was like "the tire is slowing me down"
Ace1875 4 years ago
i think i forgot top put the bolts back on
jtowndown90 4 years ago
at which point did the wheel shred?
ryanmhale 4 years ago
I've seen those before. Luckily the driver is okay, except for his wallet!
Mistertbones 5 years ago
Looks more like the axel broke right were the mount for the rotor is.
Lorandun 5 years ago
holy shit was this at moroso motorsports park
thats my home track hahahah
wonkwill123 5 years ago
oh my fucking god
Jexey 5 years ago
Cool video. Too bad for the guy who owns the Camaro!
jimbar60 5 years ago