Fast RC Boat Rigger Arrow wind NQD

[caseyaz100]

any one now how i fix it leaking water i bought it off ebay went for a drive with no mods on it and soo much water came in i havnt droven it for like 5 months it feels like such a waste soo i need some help

[MrHotBaboon]

@ nungmekha:

Did u use the original drive shaft? And do you have got some water issues?



[MrHotBaboon]

@ nungmekha:

Did u use the original drive shaft? And do you have got some water issues?

[nungmekha]

@MrHotBaboon hi,i've changed drive shaft and got some water some times

[MrHotBaboon]

@nungmekha

you changed to a flex shaft?

[nungmekha]

@MrHotBaboon yes

[nungmekha]

@MrHotBaboon yes sir

[caseyaz100]

soo all you have riten in the discription is what you have on this boat

[caseyaz100]

brushless 4200kv voltage 6-18V~~~ size. 26 x 27mm / 1.02 x 1.06in(Dia. x L)

Lipo 2200 mAh RC 2-6 Battery Voltage Mater for Trex 45

is that any good thats all i know to get

[caseyaz100]

and would 2200kv a lipo 2200 mAH go as fast as yours orr do i need the octura

sorry for asking so many questions but i just no nothing about it

[nungmekha]

@caseyaz100 4 cells lipo=14.8v X 2200kv =32560trs

you can try with the plastic(nylon)props from small ti biger size and look how's go then you can use octura,you should start from x427 till you can find the good one.

cheers

[caseyaz100]

@nungmekha woops i ment brushless 4200kv and 2200 mah lipo

[caseyaz100]

hey sorry to ask soo much but im all new to this could you please putt up a vid of how to install the lipo's and the brushless motor there is no vids on the web or on youtube of it soo you will help a lot of people

[nungmekha]

@caseyaz100 now i took everything out already,but i'll try anyway.give me about 1 week

[caseyaz100]

@nungmekha ty man soo helpfull ;)

[caseyaz100]

i thought brushless 3000kv were faster than 1700 kv ??

[nungmekha]

@caseyaz100 it's depent of voltage and the prop size

[caseyaz100]

@nungmekha soo the more voltage the faster

[peterm8133]

where can you get one of these hull's ?

[nungmekha]

@peterm8133 i've bought from eBay in Germany.you can search with ARROW WIND NQD

[peterm8133]

what type of prop is on this is it a cheapy or not ?

[nungmekha]

@peterm8133 Octura its around 20€ maybe you can find cheaper on eBay

[MrCraigian67]

WELL DONE ,thanx for sharing your vid,cheers

[nookiemookiedookie]

do you use a water jacket for your outrunner?

[nungmekha]

No,i don't

[Dellz88inside]

Total Weight?

[nungmekha]

about 800-950g.cheers

[01silky1]

how did you get it to so fast

ie what motor and esc did you use

[nungmekha]

Motor outrunner 1700kv i got it on eBay and esc 70 A from eBay as well

[robloxfan202]

holy shit nuggets!

[PhatChance7111]

does this have upgrades???

[nungmekha]

Yes ofcoz,have a look in describtion

[jacouette]

trop bien ton rigger !

[nungmekha]

merci

[Demonacuda]

Vraiment rapide le Arrow Wind.

Jvè m'enprendre un!!!

Trop bien mais vous l'avez pas modifié celui la?

:-)

:-O

[nungmekha]

Si si j'ai modifié,regardez  dans plus d'info en haut à droite

[Stuff150]

thx, that is what i tried to do but i had to cut the bar that was holding the pontunes to get reciver out instead. so i will probably just buy a boat

[Stuff150]

How did u do that? i tried to do the same thing wiht my castle creations system and futuba receive and they would not fit, and the boat wouldn't float either.

[nungmekha]

Hi,i undo all the screws under the hull and separate the 2 parts.then install the ESC and receiver right on the head,and then seal with silicone on the hull then close.behind i have only motor and servo and still have big spaces to fit li-po until 6 cells!

[nitrocloud]

Hi, Great mod, can you tell me how you wired this up ? can you use the output from the exsisting reciver to the ESC ? or did you fit all new electronics ? did you keep the stock stearing servo ? Thanks

[nungmekha]

hi,i took everything inside out,i keep only hull,now run with Feigao 380s 4934kv got very fast

[tmaxxcowboy]

how much does that cost

[nungmekha]

only the boat (new in box)on eBay i paid about 21€.then brushless motor,esc,props,flex drive,Batt li-po,radio etc....quite expensive

[tmaxxcowboy]

how fast will it go out of the box

[nungmekha]

i think it go around 5-6Km/h,it was very very slow.if you want to make it fast,you have to modify.if you want cheap fast boat out of the box you can check out EP RACING BOAT(made in chaina)and put 8 cell Ni-xx 3000mAh up.good fun

[2FRIEND3]

good friend

kaew

[5Fiend]

very good performance by this boat..

stock it is quite slow. what engnie is in there?

[nungmekha]

just motor Brushless 1700kv,ESC Dynam 70A,Li-po 4s 2200mAh,Octura X438.thats it