@blackmagic491 most likely. It depends on which synth pickup you choose. The pickups will generally sit in front of the bridge, which makes the Bigsby a non-issue. Good luck!
Would it be worth fitting a roller bridge to the guitar??? About to fit a B5 trem unit to my SG and am finding conflicting views on the use or need for a roller bridge.
I am really big fan of GIlmour but i have a LP , will i be able to do the same amount thing with a bigsby , whats the diference with a strato tremolo bar ?
thnx so muh for posting this vid , i own a epi dot studio & have been wondering whats involved with attaching a bigsby for a looong time . nice werk :)
Makes me wanna put a b-700 on mine...already got a "v-cut" gretsch bigsby on it, but I left the stopbar using it all "roller bar"...works pretty well, but you should really get locking tuners because it'll throw outta tune no doubt.
hey man, do you know if i have to order a different type of vibrato for a les paul special (it has a flat top) than for a studio? please write back, im dyin to get a bigsby
For a flat top guitar, like your LP, the best thing you can do is installing a Bigsby B3. If you don't like the Bigsby being anchored to the back of your guitar, like this one, a Bigsby B5 might be a solution (normally found op Fender Telecasters and sometimes a SG). These are top mounted
Question: I`m thinking of installing a bigsby. What I need to know is: if i am to play over the bridge (to get the chimey sounds) would that come out on the amp? or do i need to add a mic under the strings between the bridge and the bigsby?
Dots are semi-hollow which means that they have a solid block of wood running down the center. That's what the stop tailpiece attaches to so we know it's structurally sound. Bigsbys for hollow bodies are a little different.
can you add a guitar synthesizer pickup to a guitar if it has a bigsby installed on it?
blackmagic491 7 months ago
@blackmagic491 most likely. It depends on which synth pickup you choose. The pickups will generally sit in front of the bridge, which makes the Bigsby a non-issue. Good luck!
bigsbyguitars 7 months ago
@bigsbyguitars what bigsby model did u use?
jimmypagen10 1 month ago
@jimmypagen10 on this one we used the B700BK
bigsbyguitars 4 weeks ago in playlist More videos from bigsbyguitars
Hey I have a dot studio and want to install a bigsby
but to get the exact same sound as you i was wondering what amps your playing it on???
its driving me and a buddy nuts!
thanks for the video!
cheers
sickabillyskater 11 months ago
@sickabillyskater we used a Fender Twin Reissue. Great combo!
bigsbyguitars 7 months ago
Would it be worth fitting a roller bridge to the guitar??? About to fit a B5 trem unit to my SG and am finding conflicting views on the use or need for a roller bridge.
rayjaysonic 1 year ago
@rayjaysonic I would try it with the stock TOM first. Properly set up, you won't have any problems at all. A great pairing!
bigsbyguitars 7 months ago
@bigsbyguitars Yep, sticking with the stock TOM. It works fine, I just added a bit of lube to the nut and everything works and sounds fantastic.
rayjaysonic 7 months ago
i say...take it to an expert!! this is kinda dangerous for someone who hasn't done it before!
MusicMan44144 1 year ago
somebody told me can i use bigsby to any guitar??
ajam50 1 year ago
I am really big fan of GIlmour but i have a LP , will i be able to do the same amount thing with a bigsby , whats the diference with a strato tremolo bar ?
pliskinn0089 2 years ago 3
Anyone know roughly how much a guitar shop would charge to install a bigsby on a telecaster?
telecasterthommy 2 years ago 4
Would be cool to see it on a Epi Casino.. but this explained me a lot, and showed its not that hard, thanks :)
Jimbowholivesinsoup 2 years ago 4
its handy when they demonstrate your exact model guitar, gives u confidence
elliotlovesfox 4 years ago 179
they shood have done this on a les paul or a flying v since theyre more common
snipekop 4 years ago
i might consider doing this with my dot studio, thanks for the guide
Andrewjn15 4 years ago 28
thnx so muh for posting this vid , i own a epi dot studio & have been wondering whats involved with attaching a bigsby for a looong time . nice werk :)
davo809 4 years ago 14
Makes me wanna put a b-700 on mine...already got a "v-cut" gretsch bigsby on it, but I left the stopbar using it all "roller bar"...works pretty well, but you should really get locking tuners because it'll throw outta tune no doubt.
DocHelliday 4 years ago 9
hey man, do you know if i have to order a different type of vibrato for a les paul special (it has a flat top) than for a studio? please write back, im dyin to get a bigsby
johnnyboy29775 4 years ago 9
For a flat top guitar, like your LP, the best thing you can do is installing a Bigsby B3. If you don't like the Bigsby being anchored to the back of your guitar, like this one, a Bigsby B5 might be a solution (normally found op Fender Telecasters and sometimes a SG). These are top mounted
williamsanders 4 years ago 8
Bigsby also has vibratos for the SG model, so they should most likely fit your guitar. Go to their side bigsbyguitar. com
gumdropster 4 years ago 8
oooo my friend has one of those ! D:
1337leo 4 years ago 5
how much did the bigsby cost
proofguitar 4 years ago
Question: I`m thinking of installing a bigsby. What I need to know is: if i am to play over the bridge (to get the chimey sounds) would that come out on the amp? or do i need to add a mic under the strings between the bridge and the bigsby?
andybarone1984 4 years ago
Is the space underneath the tailpiece solid or hollow? How does the structure of the body hold up to the bigsby?
hammy022 4 years ago 2
Dots are semi-hollow which means that they have a solid block of wood running down the center. That's what the stop tailpiece attaches to so we know it's structurally sound. Bigsbys for hollow bodies are a little different.
wheatcentzero 4 years ago 63
Would this work on an LP?
Eljonno 4 years ago 2
Cool vid. ;)
basement94 4 years ago 2
the dot studio got really cool
christer1992 4 years ago 2
great vid...thanks!
tbone1der8 4 years ago
Thanks for this video !!!
scania26 4 years ago
well isnt this a coincidence (i dont know how to spell that) im about to get the same epiphone and im wanna put a bigsby on it. THANK YOU!
CBMAN 4 years ago 2
OH MY GOD! I GOTTA BUY A B700 SOON
guzthebird7 4 years ago