Thats a bad Idea, removing the rear fans is a big mistake, That is where the primary Outtake Air is directed. This could result in the back portion of your intercooler becoming a furnace. yes air pressure will still force the air out at the same speed, but you are heating up too much of the PS3 in return, I just put a 4 port Hub on the front under the Switch on my intercooler.
Then I replaced all the fans with High RPM LED fans.
The more USB devices connected to the PS3 the more power the PS3 needs. Meaning that the certain amount of voltage to keep the PS3 at a stable running condition will become slightly unstable. This is all good, but when theres a power surge then you will be part of the 0.2 % failure rate. PLEASE KEEP the PS3 Failure rate down. Happy Gaming and nice video
Aww man the side paned mod is fail u know y because its supposed to create a suction with the rest of the side plastic covering the fan if you take it off its just only a little helpful!!!!!!!!!!!!!
I didn't make it all im saying is that your not supposed to mod the side panel because it creates a suction with the one fan if you remove the plastic around it no more suction its just blowing air.
to mmake it work on the 40 gig ps3, you just have to cut the little notches that it uses to hold on tto the pc3 and use seom sticky rubber on the indsde to hold it one, but its a cheap peice of stock crap, all the fans died out and i got sick of lubing the fans every two weeks, which is probably why he changed the fans out, works great while its lubed but once it wears out agiain the fans turn off autonatically, making it even worse to use
drawing the power off the ps3's power supply isnt ever a smart idea thats just gonna stress the ps3's hardware out even more then it dose without usesing it.I know being a ps3 owner that ps3 will over heat after just 8 hours of use & freeze up.Now add this & your gonna just draw more power then the ps3 was meant to & create more heat but hey if you wanna burn out you ps3 all the more power to ya lol ps..dont say i didnt warn you
hi dude nice vid i like what your doing with the modding but i dont realy think that ps3 need that its like already the best console screw xbox 360 he he lol eny way nice vid bye
This has been flagged as spam show
Check out the new PS3 FLM heat sink mod. Easy installation. from Ebay.
PS3 FLM HEATSINK modification kit. Laser cut Aluminum plates
A two part heat sink that fits over the RSX and CELL chips.
farlytes01 4 months ago
wouldn't that be 7 usb ports beacause u have to use one to plug it in.
corndogmaster123456 1 year ago
Thats a bad Idea, removing the rear fans is a big mistake, That is where the primary Outtake Air is directed. This could result in the back portion of your intercooler becoming a furnace. yes air pressure will still force the air out at the same speed, but you are heating up too much of the PS3 in return, I just put a 4 port Hub on the front under the Switch on my intercooler.
Then I replaced all the fans with High RPM LED fans.
powersurge91 1 year ago
cool
timerunnerproduction 1 year ago
lol instead of R2D2, R2PS3! lol I got 7 usbs on mine.
ukmob4life 1 year ago
clean that shit up
laaayon 1 year ago
This Is Actualy The 1st Good Playstation Ma=od Ive Seen Inna While
BarcodeDRL 1 year ago
get a life
13rparsons 1 year ago
whats the name of the song? plz tell me!!!
45Mang 2 years ago
can we remove the cell proccesor & put in a P.C!!!! Need help
snafgan 2 years ago
@snafgan no....
jawbraeka 1 year ago
@jawbraeka thks dr
snafgan 1 year ago
@snafgan hell no it to fast and will not work it has 7 cores faster than core i 3 and i5 ,i7
jon204 1 year ago
overload ? ohh yeah burn dat fucker up man !!!
lipito86 2 years ago 2
Nice Way To Nigger It Upp JAja XD
kkidswaqq
MrStYLEZP 2 years ago
Or Cracker it up
deezomaxima 2 years ago 2
This comment has received too many negative votes show
when mine gets hot i just drop it in ice water but DONT forget to unplug it.....
watchforfinger 2 years ago
nice work ^^
oberst4815 2 years ago
The more USB devices connected to the PS3 the more power the PS3 needs. Meaning that the certain amount of voltage to keep the PS3 at a stable running condition will become slightly unstable. This is all good, but when theres a power surge then you will be part of the 0.2 % failure rate. PLEASE KEEP the PS3 Failure rate down. Happy Gaming and nice video
expateddie01 2 years ago 5
its more then 0.2% now lol
solidsnake123 2 years ago
@expateddie01 hell ps3 failure rate is still a lot and i mean A LOT lower than xbox360
LilB4LiFe64 1 year ago
does anyone remember the coolers you used to be able to get for the megadrive?
no me neither, fucking modern shit technology
gmnash 2 years ago
could I by that thing anywere ! or did you design/biuld it yourselve ?
TheAudiRS4man 2 years ago
wow, you attached a pre-made accessory!
R3yn07d5Ru735 2 years ago 7
nice, you have the same front intercooler3 as me, the LCD readout is extra PS3 bling :)
mobiletone 2 years ago
why we have to cool ps3.. does it have the same problem as xbox 360?
WadeBryant0324 2 years ago
a little if it gets too hot about 4% fail rate
1234psp1234 2 years ago
Aww man the side paned mod is fail u know y because its supposed to create a suction with the rest of the side plastic covering the fan if you take it off its just only a little helpful!!!!!!!!!!!!!
lizardmannnn 2 years ago
Can you put a vid of how you made it
PoWxWoW 2 years ago
I didn't make it all im saying is that your not supposed to mod the side panel because it creates a suction with the one fan if you remove the plastic around it no more suction its just blowing air.
lizardmannnn 2 years ago
To see a water cooled PS3 visit my channel ☺
anotherone10 2 years ago
no diffrence just 1 looks better than other n price diffrence
ClanXtO 3 years ago
nice looks cool whats the name of the song by the way
luckyray777 3 years ago
whats the difference between the (long rectangle cooling fan ) and the ( ovel cooling fan ) ?? :S:S. whats a better cooling fan to buy ? and y ?.
connorafc 3 years ago
you should take care of ur ps3 it looks like crap fingerprints overall dammed are u messy or something like that ?
SolidSnake19904 3 years ago
oh shit the big receiver below the PS3
DUDE you're killing you PS3 (overheating)
I beat you that receiver is hot even when is off!
Jptdo3 3 years ago 2
LOL you are right!
why put a lot of FANS 4 dont overheat if its under a BIG RECEIVER who burns the PS3 until when off?
xD
ctonotorequal 2 years ago
UGLYYY.
Why dont they just make a usb hub that clips o the front and looks legit
gamerz654 3 years ago
they do jus go to game or gamestation there about £15-£30
benwhatling2810 2 years ago
clean it!!!!!!
tengumarios 3 years ago
to mmake it work on the 40 gig ps3, you just have to cut the little notches that it uses to hold on tto the pc3 and use seom sticky rubber on the indsde to hold it one, but its a cheap peice of stock crap, all the fans died out and i got sick of lubing the fans every two weeks, which is probably why he changed the fans out, works great while its lubed but once it wears out agiain the fans turn off autonatically, making it even worse to use
mexinator808 3 years ago
drawing the power off the ps3's power supply isnt ever a smart idea thats just gonna stress the ps3's hardware out even more then it dose without usesing it.I know being a ps3 owner that ps3 will over heat after just 8 hours of use & freeze up.Now add this & your gonna just draw more power then the ps3 was meant to & create more heat but hey if you wanna burn out you ps3 all the more power to ya lol ps..dont say i didnt warn you
hardkoregamer1981 3 years ago
dude the psu in the ps3 can put out like about 20 extra watts, how do you think it can charge the controllers.
kramer3214 3 years ago
lol looks gay but as long as it does the job
does it work on the 40gig
and is it noisy???
tkm1993 3 years ago
i don't think it will work on the 40 gig, since that front cooler doesn't fit on the 40, only on the 60.
ottoenie 3 years ago
mine is not too noisy, works on all ps3s, and only increases airflow. the back shrowd will drastically block airflow on this version.
15DjjC13 3 years ago
can the fan in the front remove air or does it blow air inside of the ps3? please let me know thanks
VikesFaN74 3 years ago
allways away form ps3 or pc works great no friezing
mmlonda 3 years ago
thank you
VikesFaN74 3 years ago
i need to make one help me
bspenc 3 years ago
he didnt make that, he bout the nyko intercooler and added a big fan and usb hub to it.
masterbate23 3 years ago 2
LOL NYKO!!!
HAHA VERY CHESSY AND UGLY
KyleTwoo 3 years ago
impressive but looks pretty ugly
floli23 3 years ago
thats awesome
kris23 3 years ago
hi dude nice vid i like what your doing with the modding but i dont realy think that ps3 need that its like already the best console screw xbox 360 he he lol eny way nice vid bye
gotdrums1 3 years ago