Dont be frightened to try something, just seen the end of ur vid, I could easily rip that apart, try an aluminium plate under (thick one) .if you check with HSE they will recomend barrier cream, then gloves. Also overalls and mask, I have worn gloves and masks for the last 7 or 8 years and my lead levels have come right down, I hate overalls though and just cant wear them :(
Gloves...always, a little tip.. try a size 3 nozzle instead of your size 2, and if you hold your gun at an angle the other way pointing into your work you will penetrate through the entire sheet, if it's too hot for you introduce a sideways or circular motion as well. Unfortunately you have just melted lead on top of it.
@80ghog Hi Olli if you put on barrier cream when working with lead then you do not need to wear gloves! This gives you more feeling when working without gloves! A number two nozzle is quite adequate for welding code 4 lead. If you watch the video all the way through you will see right at the end I show the back of the weld to show the root penetration! Thank you for your interest.
Dont be frightened to try something, just seen the end of ur vid, I could easily rip that apart, try an aluminium plate under (thick one) .if you check with HSE they will recomend barrier cream, then gloves. Also overalls and mask, I have worn gloves and masks for the last 7 or 8 years and my lead levels have come right down, I hate overalls though and just cant wear them :(
ollie51164lead 7 months ago
great video, thanks for sharing this
gasse8807 7 months ago
Gloves...always, a little tip.. try a size 3 nozzle instead of your size 2, and if you hold your gun at an angle the other way pointing into your work you will penetrate through the entire sheet, if it's too hot for you introduce a sideways or circular motion as well. Unfortunately you have just melted lead on top of it.
ollie51164lead 7 months ago
no penetration
80ghog 9 months ago
@80ghog Hi Olli if you put on barrier cream when working with lead then you do not need to wear gloves! This gives you more feeling when working without gloves! A number two nozzle is quite adequate for welding code 4 lead. If you watch the video all the way through you will see right at the end I show the back of the weld to show the root penetration! Thank you for your interest.
yoDatTV 7 months ago
This has been flagged as spam show
good video, visit 07royski channel on you tube you will be surprised!!!! the new flashing former " EASYFLASH "
07royski 1 year ago
No doubt at all you are a professional tradesman, but where are your gloves mister
sandwichshort2 1 year ago
@sandwichshort2 you dont need gloves reali
newtorn 8 months ago
thanks very much, very informative.
jonnyb69able 1 year ago