@bowtienut70 Thanks..Ran Hoosier QT Pro 28x11.5. Drag Radials worked, but not as reliable when track conditions started going away. This video was from 2005, car ran 10.30's in 2006 with a change to AFR 335 CNC'd heads and 1000HP carb.
Damn good run! Why would you put lower gears for? Unless you only want to race.. What cam are you running? I got 71 project going on and dropping the BBC in. Did you beef up the rotating assembly or is it all cast? Would you recommend me some tire/wheel combos that are dual purpose?
Thanks, yes a Big Block. Car weighed 3800 + 200 lb driver. Video is 4 years old. Lost 50 pounds on the car and changed heads, ran 10.31 at 130 through full exhaust and 2 1/2" mufflers to keep it real quiet. Motor is pretty tame with 12" of vacuum at idle and uses 91 octane.
sounds like its shifting with really low rpms, whats your drivetrail set up, amazing run by the way. i got an 88 ss monte carlo, all restored with a zz4 motor , 355hp, 420ft lbs and im kicking it up to 440hp and 505 ftlbs in the sprint, i already have everything for it, Message me sometime. Thanks!
I'm guessing a 454? whats the compression? and if you could tell me some more about the motor. I want to build a higg 9's low 10 sec car. I also have a 71
Hi There, I am Tom..I was just saying thanks for the comment. Without a Trans Brake, If I try to leave at a higher RPM it will pre-load the chassis and will not react the same way every time, since this is a bracket racing car I need to be consistent, so I set it to idle at 1200 in gear and leave the same exact way every time. Thanks again for the input.
Nice, I finally get a ride in the Monte! I remember well when we both were in the 15's. Ahh the street nights of yesteryear. Car sounds mean as always.
thats what i thought
rpaintballer84 1 year ago
was this at lebanon valley
rpaintballer84 1 year ago
@rpaintballer84
Yes, 2005 or so
mc71454 1 year ago
Nice ride you running drag radials??
bowtienut70 1 year ago
@bowtienut70 Thanks..Ran Hoosier QT Pro 28x11.5. Drag Radials worked, but not as reliable when track conditions started going away. This video was from 2005, car ran 10.30's in 2006 with a change to AFR 335 CNC'd heads and 1000HP carb.
mc71454 1 year ago
Damn good run! Why would you put lower gears for? Unless you only want to race.. What cam are you running? I got 71 project going on and dropping the BBC in. Did you beef up the rotating assembly or is it all cast? Would you recommend me some tire/wheel combos that are dual purpose?
mini14mag 2 years ago
Thats a sweet run, I want to the 427 in mine i still got the cast 350 in my 71. Still light it up tho one wheel wonder baby!
Jellysickle64 2 years ago
i have a 74/77 monte carlo that i put a 427 in, it also has 3.42 gears and i drive it to and from the track, ill try and get some pics up soon of it
bvesely1974 2 years ago
Yes, I would like to see some Pics !
mc71454 2 years ago
if it is 4000lbs its a big block because a 72 monte carlo with a 350 was only at 3504lbs stock.
sweeeeeet9 2 years ago
Thanks, yes a Big Block. Car weighed 3800 + 200 lb driver. Video is 4 years old. Lost 50 pounds on the car and changed heads, ran 10.31 at 130 through full exhaust and 2 1/2" mufflers to keep it real quiet. Motor is pretty tame with 12" of vacuum at idle and uses 91 octane.
mc71454 2 years ago
What the hell? 4000lbs and you drove it to the track. Whoopteefreakindoo. I got VVT-i and I will kick your 10.80 ass
pinkcorolla 2 years ago
obviously a little "winkie". My apologies to your girl. If she wants to get "stretched out" send her over here..Too funny
mc71454 2 years ago
So...
You don't wanna race?
pinkcorolla 2 years ago
Unless you are running under 10.20 and can cut a light, don;t waste my time
mc71454 2 years ago
What's a good light to you?
pinkcorolla 2 years ago
sounds like its shifting with really low rpms, whats your drivetrail set up, amazing run by the way. i got an 88 ss monte carlo, all restored with a zz4 motor , 355hp, 420ft lbs and im kicking it up to 440hp and 505 ftlbs in the sprint, i already have everything for it, Message me sometime. Thanks!
InShatteredMolds 3 years ago
drivetrain*
InShatteredMolds 3 years ago
I'm guessing a 454? whats the compression? and if you could tell me some more about the motor. I want to build a higg 9's low 10 sec car. I also have a 71
MegaDeth659 3 years ago
hey what do you have under the hood, small block or big block?
MegaDeth659 3 years ago
Big Block, pump gas (91) 3.42 gears, drive to and from the track. Need a new video as it runs 10.30's now and has 3.73's. Thanks !
mc71454 3 years ago
u need to rev up ur engine
sergio8386 3 years ago
I don't know what you mean? If I rev it higher before shifting gears it will slow down, if that is what you meant. Thanks Tom
mc71454 3 years ago
just before the green light, nice car, im not Tom, sorry
sergio8386 3 years ago
Hi There, I am Tom..I was just saying thanks for the comment. Without a Trans Brake, If I try to leave at a higher RPM it will pre-load the chassis and will not react the same way every time, since this is a bracket racing car I need to be consistent, so I set it to idle at 1200 in gear and leave the same exact way every time. Thanks again for the input.
mc71454 3 years ago
ok ok XD
sergio8386 3 years ago
Nice, I finally get a ride in the Monte! I remember well when we both were in the 15's. Ahh the street nights of yesteryear. Car sounds mean as always.
408cuda 4 years ago
Hey Chad !!
mc71454 3 years ago
nice...
write something more about your ride :)
lilbHEMI 4 years ago