Ive run casing all over the country and i can gurantee 100% there aint one person from louisiana who who should be allowed on a rig. stick to makin gumbo and jazz. cajuns break more equipment work slower and make more stupid decisions than anybody ive ever seen PERIOD! as for the weather anybody can work in the heat only a real man can do it in sub zero.
I have a friend that just became a 'floorhand' I was curios so I youtubed it. It looks so hard. :/ it's cool that there is still people willing to work hard tho.
i work on a free swing block single i liked this video i filled in on a tripple in april its alot harder then i thought it would good work guys. and we chain out when were coaring . you guys did it pretty fast
hey buddy, were in louisiana, anywhere between 15- 115 degrees, throwing a spinning chain, after partying all damn night long, still working circles around you guys, with NO LTA's in better than 5 years, personally, ive worked from Florida, to Washington, and everywhere between, the best of the best are around the mississippi river delta, and if you think any different, give it a shot down here, and then run your mouth.
Hey Bro I Give It Up To Anybody That Roughnecks For A Living And Can Get Up And Make It To That Rig Everyday... I Might Just Have To Come Down And Give Er Hell WIth You Boys One Day Caus I Gaurentee Nobody'd Be Working Circles Around Me In Any State I've Worked From Norcal To Socal All Over Nevada, Oregon And Did 2 Yrs Roughnecking In The Worst Conditions Known To Man In Alaska... I Got A New Vid Out "Geothermal Derrickhand" Geothermal Roughnecking You Can't Get Er You Can't Stay 375Degree Pipe
@SnuffnROOSTER haha havent worked in canada buddy we get paid the most always have and always will with the most oil richest contry in north america, and in this video this a weak ass crew, but i gotta give to them it gets cold up there
@ Spinnin Chain Man That Chain We Were Using Was A 3/8 Trucker Chain Not Ment For Throwing Chain But Our Pipe Spinners Broke So We Cowboy'd Outa The Hole 7,500Ft With That Huge Ass Chain My Boy BJ Was Pretty Damn Good @ Workin It... The Bucket Is To Hold The Chain In So You Can Backwrap It Alot Faster Rather Than Have Hella Chain Chasing Itself Around The Pipe
Look Bro I Don't Know Where You Come From But Were Roughnecking In Alaska In -40 - -80 Weather And We Were Training New Floorhands To Work The Wood In Some Of The.... As For The Free Swinging Blocks I've Worked Derricks On A Top Drive And Free Swinging Block Rigs And Top Drives Are Fuckin Elite... Saves Time, It Can Backream Out, Its An All Around Hand Saver... Lil Thing Called Consistency My Friend You'll Learn
you said it, i know first hand, thats some AK roughneck'n, this crew moves well, the derrikhand and one of those guys on the floor looked like some hands, basically, it makes tripping pipe look effortless
Ive run casing all over the country and i can gurantee 100% there aint one person from louisiana who who should be allowed on a rig. stick to makin gumbo and jazz. cajuns break more equipment work slower and make more stupid decisions than anybody ive ever seen PERIOD! as for the weather anybody can work in the heat only a real man can do it in sub zero.
WyomingCaser 4 days ago
Awsome fucking work looks like you mother fucker are putting out hard and given her shit keep up the work hooooo fuckin raaaaaaahhhh
FMX101 3 weeks ago
Comment removed
wasilladan 4 weeks ago
Fuck you alaska.......
Texas is #1 for brilling Jajajaja pinchis putos!!!!!
1028yoka 3 months ago
This has been flagged as spam show
Have your tongs ready when making up and breaking out or tripping my as well have them on the moon have em ready !! and put some coveralls on !!!
jaman3914 4 months ago
Comment removed
jaman3914 4 months ago
nice hoddie wish we could were them here, and service rigs are a mans job
88skin8 5 months ago
I have a friend that just became a 'floorhand' I was curios so I youtubed it. It looks so hard. :/ it's cool that there is still people willing to work hard tho.
Everz19 7 months ago
@Everz19 depends what kinda rig hes on. its might be hard work or it might be gravy work.
TOYDOLLSKID 6 months ago
i work on a free swing block single i liked this video i filled in on a tripple in april its alot harder then i thought it would good work guys. and we chain out when were coaring . you guys did it pretty fast
back2basic3 7 months ago
hey buddy, were in louisiana, anywhere between 15- 115 degrees, throwing a spinning chain, after partying all damn night long, still working circles around you guys, with NO LTA's in better than 5 years, personally, ive worked from Florida, to Washington, and everywhere between, the best of the best are around the mississippi river delta, and if you think any different, give it a shot down here, and then run your mouth.
SnuffnROOSTER 8 months ago
Hey Bro I Give It Up To Anybody That Roughnecks For A Living And Can Get Up And Make It To That Rig Everyday... I Might Just Have To Come Down And Give Er Hell WIth You Boys One Day Caus I Gaurentee Nobody'd Be Working Circles Around Me In Any State I've Worked From Norcal To Socal All Over Nevada, Oregon And Did 2 Yrs Roughnecking In The Worst Conditions Known To Man In Alaska... I Got A New Vid Out "Geothermal Derrickhand" Geothermal Roughnecking You Can't Get Er You Can't Stay 375Degree Pipe
madhouse116 6 months ago
@SnuffnROOSTER haha havent worked in canada buddy we get paid the most always have and always will with the most oil richest contry in north america, and in this video this a weak ass crew, but i gotta give to them it gets cold up there
SteveFrench306 3 months ago
@ Spinnin Chain Man That Chain We Were Using Was A 3/8 Trucker Chain Not Ment For Throwing Chain But Our Pipe Spinners Broke So We Cowboy'd Outa The Hole 7,500Ft With That Huge Ass Chain My Boy BJ Was Pretty Damn Good @ Workin It... The Bucket Is To Hold The Chain In So You Can Backwrap It Alot Faster Rather Than Have Hella Chain Chasing Itself Around The Pipe
madhouse116 8 months ago
i know it aint doyon and it aint nabors... what company is this??? and do you guys need a derrickman. i can work old school and and caddilac rigs.
ricardoh661 8 months ago
The chain hand can roughneck not to sure about the old boy working the corner.
327muscle 9 months ago
Cause we were working 55 days straight with out a day off and if you worked on a rig you would know how tired you would be from tripping pipe
frgroughneck 1 year ago
i got a stupid question. never used spinning chain but why do i see videos of some of yall that have the spinning chain in a bucket? whats that for?
TOYDOLLSKID 1 year ago
Comment removed
orionktulu 11 months ago
not gonna say much but why are you guys running the rig so friggin slow? and why not try it on a free swinging block?
SnuffnROOSTER 1 year ago
Look Bro I Don't Know Where You Come From But Were Roughnecking In Alaska In -40 - -80 Weather And We Were Training New Floorhands To Work The Wood In Some Of The.... As For The Free Swinging Blocks I've Worked Derricks On A Top Drive And Free Swinging Block Rigs And Top Drives Are Fuckin Elite... Saves Time, It Can Backream Out, Its An All Around Hand Saver... Lil Thing Called Consistency My Friend You'll Learn
madhouse116 8 months ago
@madhouse116
you said it, i know first hand, thats some AK roughneck'n, this crew moves well, the derrikhand and one of those guys on the floor looked like some hands, basically, it makes tripping pipe look effortless
wasilladan 3 weeks ago