I have a climber silver tech and a classic red craftsman. Do you think I should try to put the silver scales on the craftsman, and create a silvertech craftsman? Would the scales fit as if they were installed pay the manufacturer?
for someone who just carries a knife to have the "handi-ness" of it (not an outdoorsman by any means at all) why not just snap the scales off, so its thinner in your pocket? I do a lot of really fine small electronic modding, and just picked up a victorinox tinker (new) at a gun+knife show, and after seeing this, I'm positing that I've going to keep the scales off of mine. I just wanted to know any negative effects of this (remember, no exposure to outdoor elements)
@GearBuyersGuide the edges are just a bit sharper feeling, but beyond that its just fine (although when opening and closing the knife blade itself could cut you if you were too "enthusiastic" about it), thanks for the quick response!
I'd feel funny buying those lots of TSA confiscations. Not so much the freebies given out by the various companies, but the others bought by people with their own hard-earned money would make me feel a bit like a thief.
My comment must of vaporized into the either! I was saying that you could use ordinary toothpaste which is a micro-abrasive and not only polish the markings right off but also restore the shiny surface finish the knife had when new. Toothpaste restores plastic watch crystals also to their original clear state. Rinse off the residue with a little mild soap and water.
I want to thank mnestrt for this tip. I tried it (toothpaste) on a dinged up, scuffed up Huntsman and it's got a nice shine back. It's not perfect, but I bet if I kept at it, I could get it pretty close to the original shine. The dings in the scales would probably require sanding first and I don't know if I want to go that far. But thumbs up for the toothpaste tip.
@CanItAlready Thanks for the feedback. Happy to be able to contribute something useful. I personally would ignore the dings in the scales. They just prove to me that it's a working knife. Besides, as useful as a quality Swiss Army knife is, it's not like they are made out of gold even though they could be considered to be worth thier weight in gold. I think also that even the finest grit sandpaper would still remove much more material than is needed.
hey there no need for sanding, just try some cellulose thinner, the thinner always got anything off of my scales i didn´t like. And don´t mind about bleaching out the scales themselfes it´s only superficial. Give it a try u´ll c
hey im planning to buy off of ebay and can you pls send me some links to a chea knife im trying to get my first knife and as you say that you got em for a buck (lucky you) i want to get them for a dollar too, so if you have some time can you PM me?
hey dont throw any away if yur gunna throw em away, send it to me!!! :) i really want a swiss army and i love yr vids you are cool and when you bought em of the ebay auctions did you pay for shipping and handling?
hey mate i like your style:) so i have that swisschamp and i accidentally removed the scales when i bioled it(yep i suck i know:S) i was wondering if i can fix it on my own using your techic and a scale from the cheapest same length knife of victorinox!what do u think?if there is a way i can buy the scales without buying a whole knife plz tell me how!
I've always wanted to order one of those ebay/airport lots like this.....but I can't bring myself to do it because I just keep thinking how those knives could have been anywhere, doing who knows what with other people...How many fell in a toilet, or was on a bathroom or subway, or hospital floor? How many people have used those toothpicks on their teeth? How much gross bloody splinters have those tweezers removed?
That kind of stuff has always stopped me, even though I could try and clean it.
I just happened to stumble across your video. If you're still searching for a solvent to remove the paint, you might want to try ethyl acetate. You can get this stuff from entomology suppliers, or as acetone-free nail-polish remover from drug stores.
Please accept my sincere apologies for my comments. I honestly did not intend to sound so rude. One of many off days I guess. I think at the time I was frustrated as a result of having just viewed several " Instructional Videos" where the producers didn't have a clue what they were talking about. I have since watched several of your other videos & found them very informative & well done. Sorry for sounding like an ass. Again, please accept my apologies.
Dude, toluol is pronounced "tol-you-all" & if you aren't familiar with it be careful it's strong stuff! The knife you are making a video about is pronounced Victorianox not Vetrinox. Sorry, I do not search for mistakes in videos it just drives me crazy when some one makes a video about something & doesn't know what they're doing or saying.
Thanks for the idea about changing out the tacky slogans on the scales of some knives. Cheers!
I always thought my multi tool was screwed in in the inside or something but yay...i have a 2 3/4 long 3/4 thick 13 tool multi tool and i took the scales off of it and not its 1/2 in thick!! :D now its fully steal although now its a 11 tool :P thanks dude :D i might beable to fit it in my survival knife handle now
Good Video! do you by any chance know the model name of the swiss knife you pick up at around 46 seconds? I have the same one but i don't know the model name i've always wondered haha. thanks for the tip too about taking off the scale it really helped
down the road..... advertising or give me knives are worth ALOT......... Yeah I know sak's are a dime a dozen now but 30 years down the road 50-60 bucks each I have old school barlows that have ads on them I have a keen kutter with a john deere logo I picked up in a garage sale,$10 good condition, $150
thankms for the response video, great point! I had not taken a classic apart myself in a while and forgot about the different rivet pattern, great tip! very random fact about mr peanut, lol, did you know the biggest colector of mr peanut stuff is actually allergic to peanuts, funny fdact for you...
thanks for the interest in them, haha, I have fun making the videos knowing people are entertained by them and if you walk away learning something new thats a bonus...
i tried doing this on my swiss army, i found out pink glue was holding the scale. then is sort of "broke apart" i threw it in the trash anyway. it sucked.
I have a climber silver tech and a classic red craftsman. Do you think I should try to put the silver scales on the craftsman, and create a silvertech craftsman? Would the scales fit as if they were installed pay the manufacturer?
sakpan39 2 days ago
wow
woofwatcherminecraft 3 weeks ago
Acetone
fenderrocks84 2 months ago
(`・∀・)b
53botti 2 months ago
anyone have a link to a UK site that would sell the scales?
aodon121 2 months ago
What did you search on eBay to bring there up?
zulfster 2 months ago
"toll-you-all" : D
billymayer1000 4 months ago
i just recently removed the scales of mine, and one of them bacame loose, so i contacted victorinox and they said they had to be machined on
billymayer1000 4 months ago
uugghhh, mormon ads
billymayer1000 4 months ago
On the small ones if you leave the scales off it can make the knife a ton thinner
MrDobans13 6 months ago
qwic this vid is ten min
wilsk8tz 7 months ago
notice the gap in the middle of the knife once the scale is taken off. a good place to store your hash
jacobbobcorn 7 months ago
hi, i have a question:
are these army knives detected by metal detectors because i have a small one which ive never taken out...its just there in my drawer.
JOHNCENA3690 7 months ago
what websitedid u get these
mattuoni 8 months ago
@mattuoni
ebay
GearBuyersGuide 8 months ago 2
@GearBuyersGuide O_o *super meat boy stinger after chapter intro plays*
*all swiss army knives break*
shaun03a 6 months ago
for someone who just carries a knife to have the "handi-ness" of it (not an outdoorsman by any means at all) why not just snap the scales off, so its thinner in your pocket? I do a lot of really fine small electronic modding, and just picked up a victorinox tinker (new) at a gun+knife show, and after seeing this, I'm positing that I've going to keep the scales off of mine. I just wanted to know any negative effects of this (remember, no exposure to outdoor elements)
evanthepanther 8 months ago
@evanthepanther
I think it would hurt your hands when using the knife is all
GearBuyersGuide 8 months ago
@GearBuyersGuide the edges are just a bit sharper feeling, but beyond that its just fine (although when opening and closing the knife blade itself could cut you if you were too "enthusiastic" about it), thanks for the quick response!
evanthepanther 8 months ago
@evanthepanther if you touch something electrical with the scales on you probally wont get a shock if you have it the off you will get a shock :)
MayContainNutsTV 7 months ago
Are you the man from gunwebsites
dolodomo 9 months ago
@dolodomo
yes, this is our gear channel
GearBuyersGuide 9 months ago
toll yoo ol
CohanDigitmatta 9 months ago
so..... what good did you did if you pop the scales off?
dont destroy a knife not even an old one
mentallystressed 9 months ago
I see how to clean them, but don't see any real modification.
aaronpetersutherland 10 months ago
Hey! That's where my Paxil knife went! Thank god I still have my electroshock therapy knife.
Deep13Deep13Deep13 10 months ago
dude... that magnifying glass was awesome... never seen anyone on youtube really do that before... they're always fiddling with their camera...
bieli0 10 months ago 3
@bieli0
I got that idea from Cutlerylover, he uses that trick all the time.
If you havent seen his videos / reviews you are in for a treat, check his channel out !!
GearBuyersGuide 10 months ago 2
@GearBuyersGuide have a give away for the mr peanut one
TwistrTot33 11 months ago
WOW i waant all of those!
paradee12 11 months ago
This was just absolutely halarius.
DobermansRock 11 months ago
i did it yesterday to clean my good old Spartan
hunya95 1 year ago
yea thats so much easier than shipping it to victorinox and having them not only fix it, but oil, clean and sharpen it for free
jakethesnake237 1 year ago
"Toluol"? Sounds german for "Trololol"
lennertmets 1 year ago
I found watching this video very relaxing for some reason!
graspee 1 year ago
Give away? Ill take it lol
evilbunnyreviews 1 year ago
Nice little collection of SAKs!
jamieski1972 1 year ago
my Swiss Army knife is much bigger;) but has also cost 120fr
killakella88 1 year ago
Can i buy one mini one from you pls ?
Disturbedteo 1 year ago
DONT SAND THEM... POLISH THEM WITH A MOTO TOOL ...IT`LL COME RIGHT OFF. IF YOU CANT DO IT...I`LL POST THE VIDEO..
pericode3huevos 1 year ago
10+ minutes of how to pop a knife scale off
stymye 1 year ago 2
@stymye
now you know to never watch our videos again, easy fix
GearBuyersGuide 1 year ago 2
"Throw away" a perfectly good knife? My brain can't even comprehend that.
CanItAlready 1 year ago
I'd feel funny buying those lots of TSA confiscations. Not so much the freebies given out by the various companies, but the others bought by people with their own hard-earned money would make me feel a bit like a thief.
CanItAlready 1 year ago
Nice work. happy new year from Sweden
SwedishSurvivor 1 year ago
This has been flagged as spam show
Nice work. happy new year from Sweden
SwedishSurvivor 1 year ago
Comment removed
SwedishSurvivor 1 year ago
can i have one?
21creed 1 year ago
u bout like 13 classics of of ebay right were they used
yanton985 1 year ago
My comment must of vaporized into the either! I was saying that you could use ordinary toothpaste which is a micro-abrasive and not only polish the markings right off but also restore the shiny surface finish the knife had when new. Toothpaste restores plastic watch crystals also to their original clear state. Rinse off the residue with a little mild soap and water.
mnestrt 1 year ago
@mnestrt
I want to thank mnestrt for this tip. I tried it (toothpaste) on a dinged up, scuffed up Huntsman and it's got a nice shine back. It's not perfect, but I bet if I kept at it, I could get it pretty close to the original shine. The dings in the scales would probably require sanding first and I don't know if I want to go that far. But thumbs up for the toothpaste tip.
CanItAlready 1 year ago
@CanItAlready Thanks for the feedback. Happy to be able to contribute something useful. I personally would ignore the dings in the scales. They just prove to me that it's a working knife. Besides, as useful as a quality Swiss Army knife is, it's not like they are made out of gold even though they could be considered to be worth thier weight in gold. I think also that even the finest grit sandpaper would still remove much more material than is needed.
mnestrt 1 year ago
victorinox not vetrinox
mclmatty 1 year ago
The red one with out scissors is an escort
Theunit236 1 year ago
@Theunit236
thanks
GearBuyersGuide 1 year ago
Would a Swiss Army Knife Hiker, be classed as a big or small Swiss Army Knife?
ArmyBoy611 1 year ago
@ArmyBoy611 medium
connieriley 1 year ago
hey there no need for sanding, just try some cellulose thinner, the thinner always got anything off of my scales i didn´t like. And don´t mind about bleaching out the scales themselfes it´s only superficial. Give it a try u´ll c
sm4rtmouth 1 year ago
hmm ye the blade style works well on both types , when i was a kid i took mine apart .
rankinmania 1 year ago
hahahah dont try to modify your sack lol
SpitBucket17X 1 year ago
hahahah dont try to modify your sack lol
SpitBucket17X 1 year ago
This has been flagged as spam show
i will take it.
MrThanThans 1 year ago
i will take it
MrThanThans 1 year ago
can you change the cover a traveller lite one? =P
111E982a 1 year ago
So do you give them to people for free ? + nice vid :D
JoeTheFuckingHoe 1 year ago
@JoeTheFuckingHoe
We don't give anything away, and we don't ask for free stuff.. I like the idea of working for things
GearBuyersGuide 1 year ago 9
This has been flagged as spam show
@GearBuyersGuide then how the fuck will anybody get them?
aceofspaids98 1 year ago
Heyy if you would like to sell any of your small knifes I am interested so please notify me :)
JoeTheFuckingHoe 1 year ago
@JoeTheFuckingHoe
we don't sell anything
GearBuyersGuide 1 year ago
Hey mate can I have one that you don't wnt anymore?
WildernessSurvivor99 1 year ago
i got a red and green small ones put they are the new clear ones there pretty cool so u can see the tooth pick in it
imsofly74 1 year ago
Where is it i can't find it on ebay a buck for those
noob2top3210 1 year ago
DONT BUY FROM THE TSA Think of what the person who owned that originally would think if he saw it here
silentsniper441 1 year ago
this guy has too many victorionix penkives,and I suspect he's robbed at least 2 groups of scouts for them.
SouthSaturnDelta1 1 year ago 14
how much to u want for the mr. peanut 1
jakethesnake237 1 year ago
@jakethesnake237 I want that one!
SouthSaturnDelta1 1 year ago
Antec = Computer case manufacturer.
surferstapleton 1 year ago
The best part of managing survival gear is getting to arrange it by color :D
xXxM0rbidxXx 1 year ago
@xXxM0rbidxXx YEAH :D! >,>
chjens5 1 year ago
600 vids!! XD!
MinerAmax 1 year ago
yay cutlery lover
tomek123kotek 1 year ago
hey im planning to buy off of ebay and can you pls send me some links to a chea knife im trying to get my first knife and as you say that you got em for a buck (lucky you) i want to get them for a dollar too, so if you have some time can you PM me?
silvercoincollecter 1 year ago
@silvercoincollecter
A buck when you buy like a dozen or more ..
GearBuyersGuide 1 year ago
@silvercoincollecter
Go to AssistedKnifeDOTcom.
M4ST3RL1NKX88 1 year ago
hey dont throw any away if yur gunna throw em away, send it to me!!! :) i really want a swiss army and i love yr vids you are cool and when you bought em of the ebay auctions did you pay for shipping and handling?
sku1123 1 year ago
@sku1123
yes paid for shipping but still came out WAY cheaper to get them that way
GearBuyersGuide 1 year ago
ied just leave the ads its knida makes them unique
kewldudesweet 1 year ago
Thank god I found your video before trying praying off the scales of my mini champ with a screw driver.
yoyomin 1 year ago
@yoyomin
Cool, glad it helped
GearBuyersGuide 1 year ago
wtf stop pokeing the knives with your pointer by yeah nice knives i wish i hade that much
airsoftloverusp 1 year ago
TEECUT car body colour restorer with a bit of elbow grease should remove the logo
126lma 1 year ago
This has been flagged as spam show
really cool knives!
how and where can you get knives with like names of companies and stuff?
manhattenhero 1 year ago
This has been flagged as spam show
really cool knives!
how and where can you get knives with like names of companies and stuff?
manhattenhero 1 year ago
really cool knives!
how and where can you get knives with like names of companies and stuff?
manhattenhero 1 year ago
hey mate i like your style:) so i have that swisschamp and i accidentally removed the scales when i bioled it(yep i suck i know:S) i was wondering if i can fix it on my own using your techic and a scale from the cheapest same length knife of victorinox!what do u think?if there is a way i can buy the scales without buying a whole knife plz tell me how!
deweyvazelosspam 1 year ago
its the secretary
1doi3 1 year ago
I've always wanted to order one of those ebay/airport lots like this.....but I can't bring myself to do it because I just keep thinking how those knives could have been anywhere, doing who knows what with other people...How many fell in a toilet, or was on a bathroom or subway, or hospital floor? How many people have used those toothpicks on their teeth? How much gross bloody splinters have those tweezers removed?
That kind of stuff has always stopped me, even though I could try and clean it.
sbab83 1 year ago
Hey if u still have the swissarmy knife that ur going to throw away can I have it?
325hn 1 year ago
Where on earth did you find them?
i cant find owt like dat!
Nice vids btw.
Jaquezy123 1 year ago
I just happened to stumble across your video. If you're still searching for a solvent to remove the paint, you might want to try ethyl acetate. You can get this stuff from entomology suppliers, or as acetone-free nail-polish remover from drug stores.
It worked for me.
gesamtszenario 1 year ago
@gesamtszenario
Hey, thanks for the tip, I still haven't found anything to do it.. I'll give this a try
GearBuyersGuide 1 year ago
@GearBuyersGuide if you dond want a few name ones send me some plz
airsoftloverusp 1 year ago
Please accept my sincere apologies for my comments. I honestly did not intend to sound so rude. One of many off days I guess. I think at the time I was frustrated as a result of having just viewed several " Instructional Videos" where the producers didn't have a clue what they were talking about. I have since watched several of your other videos & found them very informative & well done. Sorry for sounding like an ass. Again, please accept my apologies.
Keep up the good work.
Cheers!
graemelockieable 1 year ago
@ graemelockieable
no harm no foul, we all have bad days, and the internet doesn't convey intent very well..
thanks for watching
GearBuyersGuide 1 year ago
Of course you could also just buy new replacement scales and make those look like new again.
stressmaster5000 1 year ago
@ stressmaster5000
sure, but this project was on the cheap
GearBuyersGuide 1 year ago
Dude, toluol is pronounced "tol-you-all" & if you aren't familiar with it be careful it's strong stuff! The knife you are making a video about is pronounced Victorianox not Vetrinox. Sorry, I do not search for mistakes in videos it just drives me crazy when some one makes a video about something & doesn't know what they're doing or saying.
Thanks for the idea about changing out the tacky slogans on the scales of some knives. Cheers!
graemelockieable 2 years ago
@ graemelockieable
WTF ??
What a rude SOB..
I guess I didn't notice this one get posted..
Cheers your self
GearBuyersGuide 1 year ago
where did oyu get these small knifes ???
kinkanas 2 years ago
Antec makes computer parts :]
KeminmaanKauhu 2 years ago
I always thought my multi tool was screwed in in the inside or something but yay...i have a 2 3/4 long 3/4 thick 13 tool multi tool and i took the scales off of it and not its 1/2 in thick!! :D now its fully steal although now its a 11 tool :P thanks dude :D i might beable to fit it in my survival knife handle now
TheSwordOfPeace 2 years ago
cool, glad the video helped
GearBuyersGuide 2 years ago
Good Video! do you by any chance know the model name of the swiss knife you pick up at around 46 seconds? I have the same one but i don't know the model name i've always wondered haha. thanks for the tip too about taking off the scale it really helped
ZepsHeavensStairway 2 years ago
i have the biggest blue one with the cross on it !!!=]=]=]=]=]=] its a realy good one but i lost it
bowlie100 2 years ago
dang, hope you find it
GearBuyersGuide 2 years ago
lol
bowlie100 2 years ago
down the road..... advertising or give me knives are worth ALOT......... Yeah I know sak's are a dime a dozen now but 30 years down the road 50-60 bucks each I have old school barlows that have ads on them I have a keen kutter with a john deere logo I picked up in a garage sale,$10 good condition, $150
nesbitt615 2 years ago
yea, good point.. people taking them apart like me are going to make those who hold on to theirs worth even more too
GearBuyersGuide 2 years ago
Franklin Templeton - big mutual fund group. John Templeton was one of the most famous post WW 2 investors.
tomfaranda 2 years ago
ahh, thanks
GearBuyersGuide 2 years ago
Cool vid.
stealthyspider 2 years ago
thanks, did you pull them off your knife? how did it go?
GearBuyersGuide 2 years ago
Not had a go myself but may do. God to know how.
stealthyspider 2 years ago
thankms for the response video, great point! I had not taken a classic apart myself in a while and forgot about the different rivet pattern, great tip! very random fact about mr peanut, lol, did you know the biggest colector of mr peanut stuff is actually allergic to peanuts, funny fdact for you...
cutlerylover 2 years ago
Thanks for the trivia, I hadn't heard that one
This was our first response, thanks for accepting it
Your videos are great, thanks for making them
GearBuyersGuide 2 years ago
thanks for the interest in them, haha, I have fun making the videos knowing people are entertained by them and if you walk away learning something new thats a bonus...
cutlerylover 2 years ago
Set this as a video response :D
MajorMalphunction 2 years ago
I would but I don't know how to do that.. but I'll try to figure it out
GearBuyersGuide 2 years ago
doh, it was easy .. thanks for the suggestion
So this was our first attempt at it
GearBuyersGuide 2 years ago
i tried doing this on my swiss army, i found out pink glue was holding the scale. then is sort of "broke apart" i threw it in the trash anyway. it sucked.
2muchwatching 2 years ago