@jamminevis21 I'm sure he could if you paid him what it's worth, probably a thousand, plus. Very labor-intensive job, if you do it right. If an aftermarket parts company made these, they would be VERY expensive. LED tails that do nothing cost a couple hundred for a decent set. I say start with a breadboard, make your own setup so it works on 14.4V, and do it yourself. You can actually make a board and have certain lights come on at a time. Run four super-bright LEDs with a resistor in sets.
pretty neat, but how much does something like this cost ? i would like to LED my tails but its expensive sending em out to people to have it done. i dont want like it to say stuff i just want the lights to have rings for when there on and inner rings when i apply the brakes.
great idea... except in the time it takes me and my friends to check out the cool tale lights you have i would have probably smashed into the car infront of me... lol btw ... did you know alot like spinners... when your in the car >> YOU CANT SEE THEM << waste of time and money but still good idea
Can I ask what kind of controller you used for this project? How much time was invested developing the software and would you be willing to share? I'm hoping you used an Arduino...
SWEET! I just dug 15 min to find this vid again. I see that's a g2. I have a g1 with clear corners. With custom switches added, it looks doable. Thumbs up
i willing to use them on my truck in alaska as long as they can handle the harsh winters im down i even got people that could install them for me but id need two flat panels only because i would shave my tail lights and french these into my tailgate
the arrows seem like a good idea but chances are most drivers on the road would just read your tail lights and when your actually braking, they dont notice the light change and just read what it says and wont react. Then again i havnt seen it in person. Is this even legal?
hope this is road legal, coz some ppl juz cant differentiate the brightness of brake light n tail light.. hope those wordings get sense into their head.
I'm thinking there was no interface for the wording but that it was all wired to spell the words when the source power was supplied. U have one power for brake lights, press them it says brake, U have one for reverse, put it in reverse and it lights the word back. same thing for the arrow, turn on turn signal. This is just a guess. I would like to know if I'm wrong though.
I'm afraid you aren't even close. The power supply in the video is a 14.4V battery simulating a car's power.
A micro controller is used to control some LED driver chips. The micro controller uses a combination of pin polling and hardware interupts to determine what switch is activated (brakes, turn signal, reverse etc.) and then tells the LED driver chips what to display on the matrix.
This isn't a weekend project. It requires both hardware and software skill sets.
in my state this is only legal if 75% of the light actually "lights" up. same goes with "smoking" out or tinting a color. not sure how other states feel about this
i dig the lights and its is a cool idea, but if i was the person behind you i would probably be pretty pissed... thoses look really bright, on the otherhand you can teach those hungover bastards a lesson...lol, nice work man
Well done. Very nice. You need to get a vid of it installed. And what is the text entry interface? Can you change the text/pattern on the fly from the cabin, or is it pre-programmed?
please tell us how to do that i want that on my 91 crx so i can tell the hot chick in the car behind me to call me any want it can be programed on the fly
Now this is a great idea and i like it a lot, but is it legal? I can see how the governent would ban these just like neon lights (PS only in certain location) and hydraulics( " " " " " ") etc...
Signals are a safety device. This is a better safety device than the original lights. Better safety device than the original device is better safety, BECAUSE YOU CAN SEE THESE LIGHTS BETTER. It's not even for the lettering, it's just that you see the vehicle with these lights sooner than you do with normal lights,
which is safer. This is my opinion. You don't have to agree.
Ok, time for a comment by the creator. LED taillights have many benefits over bulbs (brighter, dont burn out, turn on faster) and adding text to the equation can make them safer and customizable.
This demo is inteded to show the capabilities of the taillight. I would never put "brake" on my vehicle when I hit the brake...that is for demo purposes only. Using "back" in white for reverse is a good idea however.
There are potentially many uses for these lights. Imagine a demo vehicle in the parking lot of a stereo store advertising its sales to passers by on the taillights. Or police ghost cars with no light bar in the back window, but can turn the tail lights on to strobe to act light standard police lights.
These are just a few of the many applications.
Thank you for all your comments. Lets keep the fighting to a minimum.
As long as one knows how to read English, for example, the blue "BACK" lettering signal, let's the driver behind know that the car is gonna go in reverse, MUCH BETTER THAN the standard white reverse lights. So this is how this is safety. Got it?
It's so cool, but those stupid cops are jealous and hating on the LEDs. I can't do anything without those bozos pulling me over for lights, lol!
GUARDIANtrooper 5 months ago
very creative! it looks to fit for an Rsx no?
PhamDC5 8 months ago
CAn you custom one for a jetta?
jamminevis21 9 months ago
@jamminevis21 I'm sure he could if you paid him what it's worth, probably a thousand, plus. Very labor-intensive job, if you do it right. If an aftermarket parts company made these, they would be VERY expensive. LED tails that do nothing cost a couple hundred for a decent set. I say start with a breadboard, make your own setup so it works on 14.4V, and do it yourself. You can actually make a board and have certain lights come on at a time. Run four super-bright LEDs with a resistor in sets.
88pimpin 3 months ago
pretty neat, but how much does something like this cost ? i would like to LED my tails but its expensive sending em out to people to have it done. i dont want like it to say stuff i just want the lights to have rings for when there on and inner rings when i apply the brakes.
1994toyotasupra 11 months ago
great idea... except in the time it takes me and my friends to check out the cool tale lights you have i would have probably smashed into the car infront of me... lol btw ... did you know alot like spinners... when your in the car >> YOU CANT SEE THEM << waste of time and money but still good idea
greyYwolf 1 year ago
Can I ask what kind of controller you used for this project? How much time was invested developing the software and would you be willing to share? I'm hoping you used an Arduino...
bitsurfer0101 1 year ago
SWEET! I just dug 15 min to find this vid again. I see that's a g2. I have a g1 with clear corners. With custom switches added, it looks doable. Thumbs up
arod4904 1 year ago
i willing to use them on my truck in alaska as long as they can handle the harsh winters im down i even got people that could install them for me but id need two flat panels only because i would shave my tail lights and french these into my tailgate
dmarian907 1 year ago
Wait, is this legal? o.O
2FuriousFreak 1 year ago
Where can I get one for a Toyota Tacoma?
55seddel 1 year ago
the arrows seem like a good idea but chances are most drivers on the road would just read your tail lights and when your actually braking, they dont notice the light change and just read what it says and wont react. Then again i havnt seen it in person. Is this even legal?
paintballgundown8 1 year ago
lets see it in action.
chobies 1 year ago
hope this is road legal, coz some ppl juz cant differentiate the brightness of brake light n tail light.. hope those wordings get sense into their head.
mojorossi 1 year ago
Ha dude those are awesome!
HansyPants184 1 year ago
nice
321AUDIO 1 year ago
That Kinda Suck :-(
hanrickjones 1 year ago
i need to now how to do this
dakidluk 1 year ago
I'm thinking there was no interface for the wording but that it was all wired to spell the words when the source power was supplied. U have one power for brake lights, press them it says brake, U have one for reverse, put it in reverse and it lights the word back. same thing for the arrow, turn on turn signal. This is just a guess. I would like to know if I'm wrong though.
siret 1 year ago
@siret
I'm afraid you aren't even close. The power supply in the video is a 14.4V battery simulating a car's power.
A micro controller is used to control some LED driver chips. The micro controller uses a combination of pin polling and hardware interupts to determine what switch is activated (brakes, turn signal, reverse etc.) and then tells the LED driver chips what to display on the matrix.
This isn't a weekend project. It requires both hardware and software skill sets.
radak99 1 year ago 3
any info were i can get the specs to make 1
mike081283 1 year ago
in my state this is only legal if 75% of the light actually "lights" up. same goes with "smoking" out or tinting a color. not sure how other states feel about this
DGKM81 1 year ago
Looks slightly illegal.
sim2lew 1 year ago
nice man how can i get something like this for my car....i got a 2000 accord v6
moreno829 1 year ago
I actually like that! May not be suitable for a small car (that size) but would be for my truck! :)
damon016 1 year ago
would this be legal otherwise thats pretty cool
bigtimejuan 1 year ago
make it say back off!!!!LOL
mifan93 1 year ago
cool...i want it for my bmw e30...:)
mawe32 1 year ago
@Sacroshi Thats what I thought it was going to say xD
000acr000 1 year ago
can you do that with any taillights
BIGGMoneyBJ 1 year ago
that is soo sweet
GTRPower29 1 year ago
thats awesome... do you know where i can find all the material to make these?
13Foxify 1 year ago
it would be nice to see these working on the car
beboybo 1 year ago
does it say back off
ilovemoney888 1 year ago
i dig the lights and its is a cool idea, but if i was the person behind you i would probably be pretty pissed... thoses look really bright, on the otherhand you can teach those hungover bastards a lesson...lol, nice work man
TheJoshstevenson 1 year ago
a how to vid would be cool :)
socalbraintrix 1 year ago 2
I was wondering if you know where I can get the middle light cover on the trunk
clydeanthony 1 year ago
good thinking. i like the idea and it does seem pretty helpful.
"arrow" "brake" they're easy to comprehend. A clear lens cover might be necessary.
arod4904 1 year ago
thats pretty neat actualy, dont think the "acura" text would be street legal tho XD
L1LJO3Y1313 1 year ago
Where can I get a set?
Scorpion85629 1 year ago
Well done. Very nice. You need to get a vid of it installed. And what is the text entry interface? Can you change the text/pattern on the fly from the cabin, or is it pre-programmed?
KourtneyR34 1 year ago
is this Legal?
arand4 1 year ago
that is beast! i want tale lights like that
Grindman3000 1 year ago
I like the signals and the strobe effect. If made amber.. then I would totally do something like that on my Jeep.
mediarocker543 1 year ago
please tell us how to do that i want that on my 91 crx so i can tell the hot chick in the car behind me to call me any want it can be programed on the fly
mike081283 1 year ago
please tell us how to do that i want that on my 91 crx
mike081283 1 year ago
idk y but i think that helping cops hide better is a bad idea to say on youtube my friend i like the light bar so i dont get pulled over for speeding
etxreabel 1 year ago
WTF?????!?!?!?!?!?!!?!?!?!?
Titchell621 1 year ago
Coooooooool
MrSamVIDEOS1 1 year ago
i like it!
jcha 1 year ago
I loved the arrows!!!!!
dagobb 1 year ago
I like how it turns into an arrow when you signal.
shawnster44 2 years ago
Can you have it say "back the fuck off"? We need those here in NY to get the tailgating assholes off of our rear ends.
PosholNahooy 2 years ago
would make some badaSS taillights
nismojuan 2 years ago
you have a skill. a skill that i believe all of us commenting want... lol
bradrsavidge 2 years ago
Hahaa! I'd love to see them on the car. :D
pf126p 2 years ago
lol so sick
davidjv13 2 years ago
BADASSS!!!
inocentesandoval 2 years ago
wats arola? and put the stupid lights on it!!
oniondeluxe 2 years ago
it says acura
reydeboricuaz1 2 years ago
Amazing result! I've done custom led tail lights for my Yaris but they are not as advanced like yours. Take a look at my video answer.
mackieattack 2 years ago
Wow! Respect to you! :)
rolftony 2 years ago
I want sum on my 2000 accord, HOw much???
FluentRevelation 2 years ago
lol this is so ridiculous... i kinda want one
TAKE5MOVIES 2 years ago
absolutely LOVE it
harujp2 2 years ago
very nicly done
1MgOfBlackMambaVenom 2 years ago
I WANT IT!!!! dude... where did you go to get these?
carolinabulldog 2 years ago
Now this is a great idea and i like it a lot, but is it legal? I can see how the governent would ban these just like neon lights (PS only in certain location) and hydraulics( " " " " " ") etc...
DWINTERS14 2 years ago
I'm sure its legal, as long as they don't simulate strobe like police vehicles
SirFrag32 2 years ago
I think the concept is wonderful... Were they difficult to make?
dlb300zx 2 years ago
i have a acura legend can u do it for me let me know
eliezerjean 2 years ago
thats freakin sweet i want some
1sickprelude 2 years ago
hey where did u get those light from or did u make those?
burton7438 2 years ago
Jus one question probably been askedd before but how did you do that
codemastaflash05 2 years ago
I'm all for debate, but any comments with personal insults or useless profanity will be removed.
radak99 2 years ago 8
@radak99 how did you do this?
lilbikr89 1 year ago
Signals are a safety device. This is a better safety device than the original lights. Better safety device than the original device is better safety, BECAUSE YOU CAN SEE THESE LIGHTS BETTER. It's not even for the lettering, it's just that you see the vehicle with these lights sooner than you do with normal lights,
which is safer. This is my opinion. You don't have to agree.
V8Fiero2M8 2 years ago 8
Well that's not opinion, thats a fact, especially during highway driving
calladuz 2 years ago 3
Ok, time for a comment by the creator. LED taillights have many benefits over bulbs (brighter, dont burn out, turn on faster) and adding text to the equation can make them safer and customizable.
This demo is inteded to show the capabilities of the taillight. I would never put "brake" on my vehicle when I hit the brake...that is for demo purposes only. Using "back" in white for reverse is a good idea however.
radak99 2 years ago 3
There are potentially many uses for these lights. Imagine a demo vehicle in the parking lot of a stereo store advertising its sales to passers by on the taillights. Or police ghost cars with no light bar in the back window, but can turn the tail lights on to strobe to act light standard police lights.
These are just a few of the many applications.
Thank you for all your comments. Lets keep the fighting to a minimum.
radak99 2 years ago 5
Comment removed
V8Fiero2M8 2 years ago
Comment removed
V8Fiero2M8 2 years ago
Comment removed
V8Fiero2M8 2 years ago
Comment removed
V8Fiero2M8 2 years ago
fuck tha haters, that shit hot though
TurboMirage99 2 years ago
As long as one knows how to read English, for example, the blue "BACK" lettering signal, let's the driver behind know that the car is gonna go in reverse, MUCH BETTER THAN the standard white reverse lights. So this is how this is safety. Got it?
V8Fiero2M8 2 years ago
i tag this RICE. u got skills use them for something better
LilPiggyBank90 3 years ago
Not only this looks good, but it can improve safe driving. If you use the safety idea behind this, this could be more than just a nice idea.
V8Fiero2M8 3 years ago
I like the idea.
V8Fiero2M8 3 years ago
i want those light in my prelude, bb6 1997....will pay cash and lots of it...
bouckarooo 3 years ago
If you can make that say Honda instead of Acura... How much you want for it?
Orangeness81 3 years ago
why would u want it to say honda -.-.. i have an acura integra and in the front wind shield i put "YOUR [HONDA LOGO] SUCKS"
ChikenTako 3 years ago
acura is honda and their all 4 cyl pieces of shit.. on my v8 5.0 mustang i have no stickers because i am not a geek
Smoke420BC 3 years ago
yah i have a 5.0 too =D i bought it last week
'92 mustang gt
it rules, and yes,
it doesnt need stickers, it speaks by itself :)
ChikenTako 3 years ago
OMFG nice job
shinyseb 3 years ago
That's really cool. I want some for my 93 Integra.
Poncho4NCVox 3 years ago
what device to make light change character like that? and what king of led?
ohnotemp 3 years ago
led lights XD jk, i dont know
1998MitsuEclipseGS 3 years ago
I think you need another camera =P nice lights though
R0JIBLANC0 3 years ago
sweet lights
alexgonick 3 years ago
lol
number1streetracer 3 years ago
how can i have you make one is that possible!?
lambufgod 3 years ago
i want one!!!
uknowhuidiz 3 years ago
nice
danielkabuto 3 years ago
Get em on eBay! You'd make a killing!!!
blingb1tch 3 years ago
hit me up how did u do it
leonop 3 years ago
i got to have that how much do u want for it
HowardSullivan 3 years ago
that...is...genius!!!
Aim4TheMedic 3 years ago
that is the most.......that is aosome....im speachless
mifan93 3 years ago
fuck id be pissed if i had to follow that!! nice!
nissantuner90 4 years ago
People on acurazine and clubrsx will def buy these. I know I would.
McflyGuy23 4 years ago
HAHA, Very Sweet!
camrazy 4 years ago
That is sweet! You could make a fortune selling those on eBay!
detailwerkz 4 years ago
BADASS!!!!
phatchase 4 years ago
Same here, I'd love to get the diagram on this :-)
maxfaction 4 years ago
i would like to know the diagram as well. that's a sick brake light
INFINITYGTR 4 years ago
Awesome, can you share the diagram?
chiroliro1971 4 years ago
That is awesome.
bhg530 4 years ago