bad weld

[vanfamco]

I was laughing before it happened then it happened and I lost it. Lol...that's what she said.

[ExotheBest]

ahhaahhahahahahh

[oiler31]

welds consisted of lack of fusion , undercut, cold roll, porosity , hydrogen cracking , slag inclusions , uneven leg , spatter ,arc strikes , insufficient throat and incorrect welding procedure for the task at hand . hahaa!!!

[markkuz23]

Wow that sucks

[TheFordsforme]

prolly another 9' ford rear that was tired of being in a chevy ha ha

[lelib2007]

Made in USA

[Hobbitchoker]

@lelib2007 Worst comment I've read. Don't blame a Domestic vehicle for being modded by a shit mechanic.

[afrosteviac]

it would only be better if it were a honda or he had a mullet.

[011022033011022033]

Bubba forgot to connect the four links.

[DivineWindSerpent]

Grade 8 bolts, grade 8 bolts man! You know, its the last grade you were in!

[1werall]

lol i would like to say is STUPID AMERICAN

[bcbcbcbcdc]

@1werall Fuck off. Who are you to say something like that?

[moparpadilla]

shouldve got a Mopar

[nixvek]

@moparpadilla u know what they say bout mopar dont u?....closest thing to no car haha

[moparpadilla]

@nixvek you know wat they about chevy rite?? it suks hahaha and its mopar or no car

[moparpadilla]

@nixvek you know wat they say about the chevy rite... it suks haha

[jwtrain2win]

HAAAAAAAAAAAAAHHHHHHHHHHHHAAAA­AAAAAAAAAAAHHHHHHHHHHHHAAAAAAA­AAAAAAA idit

[JuanPapaNicolao]

he didn't use enough duct tape

[xstr33tr4cerx]

hey Joe i think its time for you to get a honda

[mattg889]

I don't think quality is the issue here. This is what happens when you use a modified engine with the stock rear axle. It just can't take it.

[GIwillo]

@mattg889 naaah...if it was a stock axle or a weak axle the diff would have been crushed.but who knows

[mattg889]

@GIwillo I should say everything holding the axle on was probably stock. but yea, who knows

[454ChevyBoy454]

that aint a bad weld....thats just pure CHEVY power for ya my friend.

[camaros65]

@454ChevyBoy454 YA that was probely just a ford axel on the car

[Garselo]

@camaros65 And why the hell would they do that? Not very smart thinking there buddy.

[camaros65]

@Garselo True, Im a big chevy person

[gizmotwadlebutt]

I always heard some people could drive the wheels off a car..... Now there's proof.

[wolfpackfan2317]

my jaw dropped

[squirlybmx]

So much torque... it blew the wheels right off the car from the line.

[goodride2004]

lol chevy :)

[killarota7]

lol fail vid name u dnt weld those parts 2gether

[Tommy92L]

So who won?

[seansskyline]

30 mins later on craigslist:

10 inch rear, 4.55's and drag radials for sale

[nextrider123]

Ha wouldn't have this problem with a 4 cylinder u would of made it down the strip but instead u drive a pos slowmaro with wayyy too much tire for that stock ass 350

[halomaster985]

@nextrider123 Obviously it isnt slow or stock if it broke the entire axle with it's torque

[thekrazed]

hahahahahahahahahahaha fucking funniest shit I've ever fucking seen.

[MysticDMBherb]

What was his time?

[justmks]

Dang, should have got a front wheel drive!

[Model192]

Oh, snap.

[1scott921]

hh americans...

[thatoutherguy253]

he was a good sport about it

[littlehobart]

All you slant eyed bumblebee sounding admirers make me sick. its too damn hard to respect a car my grandma would drive.

[shdymoj0]

@littlehobart And ignorant Americans such as yourself are the reason why the rest of the world hates the US.

[CadetBarrera]

Its American made..... honestly what do you expect?

[SneaksForFreaks]

in his mind. "well need more duct tape next time..."

[ehurtx]

i can't believe it...... where's your mullet?

[ehelibuff73]

American made.

[y2komar]

hahahahah....  street mechanics are not for drag racing. lol

[68django]

If that happened to me, I would laugh until I threw up...That would be so typical "My luck"!!! Lol!!!

[Unrated48]

Lol u must feel stupid...

[dcrasta]

Hahaha .. 

[Snowcrest289]

The rest of us saw that trick almost 40 tears ago in American Graffiti. What a classic movie!

[SenorSpode]

@Snowcrest289 Yeah, but that was a cable around the axle and a pole. Equally funny, though!

[JohnLeePedimore]

Now that's what I call "independant rear suspension".

[kwkiller]

I have heard ofthe rear-ends being the weak link for drag cars, but dang!

[21April853BC]

Too much power!

[botoheadboy]

He's soo fast he left his rear end behind!!

[RusslaDJ]

Hahaha!

[zizwop]

This defines fail.

[kens67mustang]

whahahhahahhahahhhahah! LIKE A STINKING ROCK!!!!!!!!! EPIC FAIL!!!!!!!!!!!!

[1scott921]

it's sounds like an tractor

[38snipshow]

@1scott921 no it doesn't sound like a tractor? thats called a camshaft..

[madcapromanian]

Another fine product from the people at Chevrolet. Next time, buy Buick!

[Streetracingpunk72]

@madcapromanian Buick is owned by GM... You know, the same GM that owns Chevrolet?!

[madcapromanian]

@Streetracingpunk72 Yeah...but Buick builds it better! :D

[patrickharmon70]

ummmm......yeah I think that was suppose to happen!

[dlnqntdevil]

Ha Thank You Auto Zone for all your quality parts...

[EarlierBee]

Typical Chevy :)

[417coty]

next time let your wife drive

[slidellpimpbigboy]

i think your left something behind .........the weels are a important part make sure you put the bluts back in

[crazyAlexander23]

some thing went wrong

[weldinggod1]

I see this time and time again. Some grease monkey picks up a welder and thinks he can weld. WRONG. And thanks to CHINA producing cheap crap welders at all time lows, more and more idiots are trying to weld. Just because you own one, doesn't mean your a weldor. No "C of Q" or no "Redseal" and no Structural or Pressure vessel tickets? NO WELDING, and it should be law.

ULUA46

[Notch200sx]

LOL OMFG IM ROLLING

[buchan16]

whos the two fags who disliked this? this is funny as shit!

[hawks754]

its not a bad weld u dont weld the back axles to the drive shaft and the supsen

[mudmilitia]

what happens when you buy cheap parts store u-bolts

[1SteelToeJoe1]

When ever you put model cars together as a kid I bet there was alot of extra pieces when you finished. Ya, me too.

[mta415]

so much for "Tech Inspection". I feel for you bro, that stinks...

[connerconn]

this happened in sturgis sd at there 1/8 mile track

[72fordguy]

its a Chevy thing....it happens.

[DGKall2010]

@72fordguy watch it be like a ford 9 inch rear. haha im just kidding ford 9 inchers are amazing but hey any car can be made either nice or bad it depends all one the parts and whose making it.

[72fordguy]

@DGKall2010 lol agreed agreed!

[wBuLk12]

now theres your problem

[Bestdriv3r8]

that car stopped him dead in his tracks!

[WaWagasman]

LMFAO! ROFL! That's worse then a bad weld

[Jsiff]

Oops, you left your tires on the track. Might wanna pick those up.

[MeGaPoPpInFrEsH]

FAAAAAAAAAAAAAAAAAAAAAAAAAAAAA­AAAAAIL LMAO!

[vorgon303]

AWWW that's just wrong!

[jbm4551]

hahahahahahaha hey i think something fell of ur car

[Baphamatt]

Hahahahahaha

[Dartht33bagger]

Hopefully the third gen wasn't damaged too bad :(

[Vert344]

BWAAAAHHAHAHAHAHAHAHAHAH!!!! (Looks at car) AHHHHAHAHAHAHAHHA!!!!

[jpcs302]

I KNEW I FORGOT TO TIGHTEN UP THEM BOLTS!!!!

[soapyman100]

look a him get mad at first then he looks at it and goes DAMN! with a smile of laughs

[Whiskie11]

Wait Why Idnt Failblog Take This Vid!!!!!

[KLONIME1001]

lol yeh. muscle sucks balls

[MRDARKSIDE219]

CAR IS TO FAST FOR THE REAR END LOL

[f500xl427]

MADE BY PRIDA

[xdjflyboii]

LMMMFAAAOO!!!

[dextramazing]

yet again another failure from american cars

[slingblade1991]

@dextramazing ohh, like it was stock or something? Your car probably doesnt even make enough torque to tighten that things lug nuts....

[dextramazing]

@slingblade1991 dude my rx7 would rip that car a new ass hole 867hp 965 pounds on a three rotor 6.6 in an eigth 7.1 in a quarter naw no torque at all look it up bad20b

[dextramazing]

@slingblade1991 yea wen that fairmont takes a shit ill come pick you up in my fd rx7 take you around the block breaking your spine and making your ears bleed as i rip the nearest 190mph stretch in 15 seconds sideways on the interstate my turbo compressing more air per square inch than that fairmont puts out in horsepower then ill swing you by the hospital after my car ripps your heart in half and drop you off deal

[slingblade1991]

@dextramazing HMMM.thats funny, you dont have any videos of it on your page.

[dextramazing]

@slingblade1991 its for a reson its called POLICE anyways one of my buddies recorded my car his page is 1bad20b the blue rx7 is mine and im in the car and he videos ill try to post some after editing my damn licens plate out

[dextramazing]

@slingblade1991 my bad his page is between22 and the videos of my car is 1bad20b

[ROACHSB]

Lmfao who needs airbags or hydros to lay on the floor lmfao

[Gyroscope44]

Now we've all been there!

[tmann102]

You have just lost the game.

[ghettodriftmonkey]

@tmann102 asshole :(

[chevygearhead454]

yah cuz rear axles and differentials are definatly welded on......

[gillieman760]

"hey Bobby I found those bolts you were looking for..."

[firrinnaruto]

@gillieman760 Bobby - ya thoughs would have been good about 7 mins ago, u no, when my car was still in one piece, dumbass! LMAO

[castles563]

alot of car drivers would of shown very pissed emotions at the time he goes DAYYYM hahah i love it American Muscle ftw

[bgenie316]

was the rear held on with bubblegum?

[iBEaSTEYY17]

Whoa! Where'd he go??

That's a LOT of torque! XD

[trunkbangking]

@iBEaSTEYY17 hahah..i still get a kick from this

[Liljammer94]

Theres A Chevy For Ya! If You Wouldve Had A Ford, That Wouldnt Have Happened! :)

[dodgekid83]

@Liljammer94, your right.... a ford wouldve blown the power steering pump before it got to the track and it wouldve rusted so bad it wouldve been unrecognizable and dont forget a ford wouldnt have had the torque to do that....

[BIGblocks4life]

@dodgekid83 a ford would've had the torque to do that.... If it had a chevy motor lol

[Liljammer94]

damn, chevy fails YET AGAIN!!!

My Pinto Wouldve Outran That Thang

[DRcaprice]

@Liljammer94 because ford engine dont have the power like chevy engine. face it, thats reality.

[otto4564]

hahahaha

[wwwbenlew]

hey man u need those to go down the track!

[tunastrike11]

I throught the tape would hold it.

[highazballs]

think they lost something important...

[bluehazer]

Clever way to save on gas, eh?

[PoorMichael6]

faaiiilllll

[killztenchi1717]

"Gets out of car" YAHHH!!! lol

[gregmacknass]

You could see during his burnout at :02-:03 he snapped something in the suspension, because the car settles slightly. With that kind of power, you gotta be sure of your fabricating and design skills.

[StopDownNow]

EPIC FAIL!



[habbousa01]

Simple mistake... >.<

[tigersmithjohn]

thats y u pre-check everything before going out on the dragstrip.......dumass.....bet he feels retarded now

[MrJesspatrick]

@tigersmithjohn whos the fuckin retard??? putting down at least 550 to 600 horses, shit is gonna break...wheather you check it first or not. you are obviously not a member of the NHRA. Go get educated FUCKTARD!

[Cylence01]

@MrJesspatrick

If there's anyone that needs to be educated it's the guy who installed the Differential!

Also, "go get educated" ?

I think what you were "trying" to say was, go get an education.......

CHEERS

[MrJesspatrick]

@Cylence01 no, I meant exactly what I said. "Go get educated." Proper english, dude=)

[Cylence01]

@MrJesspatrick

Think about what the word "educated" truly means, and then add the "go get" to it & think about it for a few minutes and then tell me if you still think it's a proper sentence.........

[MrJesspatrick]

@Cylence01 Ya know, how did you try to turn this into an english lesson?!? With your "Cheers" comment, I have to assume that you are from the UK? UK and US english have always been different. Considering this is all about your stupid comment on this video, I don't see how my english should be called into question. Have a nice day =)

[Cylence01]

@MrJesspatrick

I'm actually from Canada so maybe next time I'll just end my comment off with "EH"?

I just figure, if you're going to rip on someone do it properly......it was just a friendly FYI, I mean, its not like I was calling you names or anything right?

[MrJesspatrick]

@Cylence01 okay, you got me on the Canada thing. LMFAO! You have to realize how much "Proper English" varies from state to state, let alone country to country. What you figure as being correct, I may see as being incorrect. It all basically comes down to you rippin' on somebody for something that could happen to anyone...That is the bottom line =)

[Cylence01]

@MrJesspatrick

Fair enough, I'm glad to see there are still people on this site that can actually reply back with commonsense and not turn into a fuck-tard for no reason,lol

Much appreciated..................E­H! :)

[MrJesspatrick]

@Cylence01 LMFAO!!!! I love it =)

[ExUSSailor]

Ha! That's priceless!

[vandenabeeleandries]

instant lowrider ...

[Nza420]

reminds me of Leave it to Beaver when Eddie Haskel put a chain on Lumpy's axle..

[spleeja]

another piece of shit camaro

[ieatwithjesus]

@spleeja just too much power ricer

[1247691]

Damn!!

[440sac]

hilarious!

[kriscman]

hahahahahahaha piece of shitttttt lmao

[drewmanly]

It was all that power lol!

[NeeKroVal]

the ass end fell off

[stealthcorvette]

third gen camaro = shit

[Gutubeuser]

He forgot the hand brake

[chicagolandhobby]

Either a bad weld or a bad welder.

[Dshaws90fordf150]

I wonder if he just put it back in. lol

[08Bellstar]

HAHA

[SuperAiden101]

hahahhahahaha, just fix it with duct tape lol

[bobdudle123211]

aaaaaaaaaaaaaaaaaahahahahahaha­hahahahahahahahahahahahahahaha­ha!@!@@!@@!@@!@!

[TeacherPHD]

he should of asked for a v8

[galatayalcin]

hahaahahhhaa

[kirkmerehooper]

No they just had a orgasm over how much horsepower it had and forgot to bolt everything back up.

[pearldrumer9]

"YEAH!"

[impavitus]

lol  " Shit!!!!!"

[ObiWANkaNOOBi]

HAHAHAHAHAHAHAHAHAHA



[bigdow100]

now thats torque

[11282RDS]

apparently super glue isn't so super

[bmxer14]

you can clearly tell that he didn't have enough clearance in the fender well to fit those tires and when he went to launch he bottomed out and the friction from the tire on the inner fenderwell is was caused the diff to come out and ya the welds too

[RaNdY04gt]

thats the quality of a chevy car!!

[bmxer14]

@RaNdY04gt no... wrong size wheels for the fender well

[getyourballzup]

Meth head with a race car!

[cardbordbox]

next time dont use a coat hanger for your welds ..

[sstroh08]

theres your problem!