Corner Posts: In the video you have the corner posts at 53" with a 12 degree bevel. What is the length of the opposite corner posts? Looking forward to building this in two weekends.
Your measurements are incorrect. If the base is 141" wide, how can the header be 147" long?. You have to increase the base size. Also I tried using a scrap 2x4 as a spacer and I could not fit 21 boards across. I had to use another piece of wood that is 1.25" wide. Then all 21 boards fit without having to cut down the last one. Probably because I followed your measurements without first checking them. If I made the base the correct size, they would have probably fit.
Cool idea, I would place all slates on the outside for a better looking coverage and all the framing would be on the inside. It works and I think I might build one next to my shed....
I have a lot of wood and will be using a lot during the year. I was thinking of having mine 20 feet long and the width being either 4 feet or 5 feet wide so I can have a double roll. Opinions please before I build. Thanks, Tom
Pretty cool. Thanks!
gwdurham 2 weeks ago
Is the removal of my shirt while working optional?
shizlnit 1 month ago
Any particular reason you built the sides and back fully closed instead of the usual way of having gaps between the boards for ventilation?
Nice instructional.
thirteenfingers 2 months ago
@thirteenfingers No, I just thought it looked nice.
irmjeep 2 months ago
@irmjeep I'll give you that, it does look good.
I've got to build three of the things so just picking peoples brains to see what's worked for them and why they've done what they do.
Most I see have the slatted sides for ventilation so I thought I'd ask.
thirteenfingers 2 months ago
Good video but I cant get it to show on my iPhone
syndicate2802 3 months ago
How much would you guestimate you spent on this project? Thanks
jennerdoerr 5 months ago
Corner Posts: In the video you have the corner posts at 53" with a 12 degree bevel. What is the length of the opposite corner posts? Looking forward to building this in two weekends.
boettg33 5 months ago
The spacing on the floor slats is a great idea. Thank you.
j1973me1234 6 months ago
its a chicken coope
BANGERS68 6 months ago
Your measurements are incorrect. If the base is 141" wide, how can the header be 147" long?. You have to increase the base size. Also I tried using a scrap 2x4 as a spacer and I could not fit 21 boards across. I had to use another piece of wood that is 1.25" wide. Then all 21 boards fit without having to cut down the last one. Probably because I followed your measurements without first checking them. If I made the base the correct size, they would have probably fit.
abowhunt 7 months ago
@abowhunt You are correct about the header length. That is a typo that i will fix. The header should be 137" not 147".
irmjeep 7 months ago
Cool idea, I would place all slates on the outside for a better looking coverage and all the framing would be on the inside. It works and I think I might build one next to my shed....
MaxCarnage1 10 months ago
@MaxCarnage1 nice idea, that would look nice
irmjeep 10 months ago
I have a lot of wood and will be using a lot during the year. I was thinking of having mine 20 feet long and the width being either 4 feet or 5 feet wide so I can have a double roll. Opinions please before I build. Thanks, Tom
thomasyoung34461 11 months ago
Could you please tell me the lengh and the width of your Firewood-Storage Shed?Thanks
thomasyoung34461 11 months ago
Nice farmer's burn at 0:34
Ouch.
eatnosenuggets 1 year ago
Put soap on the threads of the screws and lag bolts and they will go in easier.
MrLeonard55 1 year ago