Traxxas setup 10 of 21 - Setting up the Carburetor

[93DARIAN]

i need help i have a tmaxx 2.5 and my brother thought he knew what he was doing and messed up the needles setting and now i dont know where to start can someone help me and tell me where the factroy settings r plzs

[icool247]

@93DARIAN i believe its 3 turns at both top and bottom, but thats on traxxas 3.3. call your local hobby shop and see. they should know for sure

[sk8m8d8]

just wondering the guy said the the crabie. is set at the traxxas factory. Does this mean i change the settings when i start it to meet the standards or after the break in i change the settings can some1 help me pls. im new to nitros

[3DaysTillGrace]

The settings from traxxas are for break in. So break in your motor first. Then start leaning it out a little bit

[MrHacker3000]

Help

I dont now how is the carburater adjusted?!?!

I just nowthat is at half but the car does not start!

I dont now how many turns the carburater hasbeen moved!

Help please!

[Airfilterer]

the base settings for the high speed needle is 4 turns out from closed

[MrHacker3000]

Thanks alot!

I will try it!

:)

[bengoro150]

i am so appreciated for that animation.. good job thanx

[lsj97]

i dont get it i try to do it but the spark plugs allways go

[stelthblend]

your engine probably has a lean high or low speed needle

[broikos]

can somebody tell me how must a carburator must be tuned? I have screwde up mine and I need to know how many times i have to turn the screw anti-clockwise (from thew point it is all way to the right)

[kotaclark]

the top is 4 the bottom is 1.5 i think

[mothafugganbeshliwgf]

Help, im trying to tune my 3.3 on my t-maxx. I think ive got the high speed set but if i drive it at high speed and bring it back it dies. Thanks

[Jmartin2683]

is the low speed needle set correctly? pinch test it and if it isnt right fix it. if it is right turn up the idle speed.

[mustangfreak12345]

yor carbourator is closing too much put your idle screw im more

[BraydensGasMaxx]

idle it up and lean out the low speed 1/2 turn and see if that helps... :)

[MudLite26]

help, after pinning the throttle or right after a high speed run the engine will rev up like crazy, then will die down, and quit unless you stay on the gas, but other wise run fine

[Thebob12904]

Can anyone help me? I just bought a used T-maxx and i think i have the high speed needle right but i cant get it to stay running. Any tips at all?

[ofnaboi]

go to your LHS and get them to break it in for you

[MdNitroRacing]

sound's like's it's not tuned right.

[nissanskyline16]

make the high speed rich slightly more than is ok then lean out ur low speed slightly i also have 3.3 tmaxx

[traxxasdriver49]

hi i have a nitro buggy and when i start it up it starts fine but then i go to drive it i reve it and a goas very slow so i try driving it around and it seems like it cant grab could it be to lean or rich i am new to nitro so could you help me

[traxxasnitropede]

HELP,my 2.5 is tuned right but still wont idle.please respont

[eligs340]

it could be to lean

[traxxasnitropede]

I found the prob. it was the low speed needle, it was way to lean

[6650roger]

I love my 2.5. I dont go for that dont put aftermarket stuff. My motor is almost all aftermarket. Still a 2.5 though. over 5 gallons and going great

[nam212]

that is so cool

[motocross2757]

cooollll