I used an encylopedia to "read" the code, then I used an audio set called CodeQuick to learn how to listen to it. For example: "D" is -.. the set had flash cards too, the D would be a dog making a mess on the floor and it says "Dog did it" (Just think Long-short-short). Works very good, I think. Good luck.
Google either "MRX and MORSE CODE" or better yet "G4FON + Koch Method" for free download training software. The G4FON programme is the one most radio ops would recommend. 73 es Good luck!
Generally it's recommended NOT to begin by learning the code visually, bur to begin learning it aurally from the very start. I would have to guess the Gordon West tapes have been the route most have taken for the last 25 years or so. Amateurs in many cities have provided over the air training and pract on frequecies that can be received by police scanners. Don't get in a hurry keep your sessions to around 20 mins, but don't let too much time go by until the next 1 GL.
If that is an LED signal; looks like theres a bad solder joint or connection on the circuit board which is causing the light to blink on and off.
I had one LED based pedestrian signal in my town with a similar problem except it stays lit but goes out every once in a while. Sometimes, it would flip the "middle finger" at you when the remaining fingers flicker or go out.
auie
darthme1000 9 months ago
That is an artifact between a new LED signal flashing at 120 times a second and the video camera scanning.
Mudimush 2 years ago
.- ..- .. -- ...-
AUIMV
dats wat i got. im new 2 dis so idk if it is rite. jus tell me if its rite or not cuz i couldnt get all of it i probably missed like 3letters.
akilaguy 3 years ago
why does it stops on 09:00
deafmonk19 4 years ago
because the government doesnt want someone breaking the code.
53531640 4 years ago
i meant the video stopped at 00:09 and when i checked the comment it started working and ran through the whole video.
deafmonk19 4 years ago
yea ladys night on thursdays
Thunde25r 4 years ago 7
"Replace the light bulb"
Mindraker1 4 years ago 6
Lol, what exactly do you do? communicate with aliens in morse?
macchesney 4 years ago
I wish i could learn morse code. It seems like so much fun. Is it hard to learn & memorise?
Shangas 5 years ago
Look it up on Wikipedia and download a trainer at the bottom.
BirdValiant 5 years ago
I used an encylopedia to "read" the code, then I used an audio set called CodeQuick to learn how to listen to it. For example: "D" is -.. the set had flash cards too, the D would be a dog making a mess on the floor and it says "Dog did it" (Just think Long-short-short). Works very good, I think. Good luck.
ElecticSoul 5 years ago
Google either "MRX and MORSE CODE" or better yet "G4FON + Koch Method" for free download training software. The G4FON programme is the one most radio ops would recommend. 73 es Good luck!
Sandiedee 5 years ago
Generally it's recommended NOT to begin by learning the code visually, bur to begin learning it aurally from the very start. I would have to guess the Gordon West tapes have been the route most have taken for the last 25 years or so. Amateurs in many cities have provided over the air training and pract on frequecies that can be received by police scanners. Don't get in a hurry keep your sessions to around 20 mins, but don't let too much time go by until the next 1 GL.
westkan 2 years ago
i hear ya, music, tv, ...its crazy. but i copy morse code everyday. well except on the weekend ofcourse
ryology 5 years ago
If that is an LED signal; looks like theres a bad solder joint or connection on the circuit board which is causing the light to blink on and off.
I had one LED based pedestrian signal in my town with a similar problem except it stays lit but goes out every once in a while. Sometimes, it would flip the "middle finger" at you when the remaining fingers flicker or go out.
yuandrew 5 years ago
hahaha do you have the video?
deafmonk19 5 years ago