92 Bronco Flowmaster exhaust

[jakebull6263]

what kind of lift do you have on it

[1964nHalfStang]

Hey have a question... where did you get those clear parking lenses? The Billet Grille and the lenses really upgrade the look of the truck

[xsniperprox1]

lol i had a almost 500hp big block in my for galaxy 500

[xacdcx7]

where did you get them side window visors

[tractorshack]

2wd....jk

[Fxr1212]

he looks like phil margera

[Dieselpower2000]

Love the truck! I'd love to smell the exhaust fumes and get pulled behind that awesome truck!!!:)

[yaboykevin1]

what kind of tires are on this and what size?

[yaboykevin1]

beautiful bronco



[757VAwrestler]

i love your truck

[tommyboy8984]

straights sound better,

[iAssistent]

hey man

nice bronco man!

how high is the lift?

[KrazyRMjumps]

is that on the stock gears?

[Dluniz09]

I also have a 92' ford bronco,E40D, single 40 series flowmaster exhaust(want dual) what size wheels/Rims are you running on that bronco? I have 15x10 Mickey Thompson Classic Lock wheels, and running 33x12.50R15LT Mickey Thompson MTZ's and my rear tires dont stick out like yours does.... i plan on the near future to do a SAS front and regear to 4.88... and run 38's...

[yamahaman123]

uh its 2000 pounds less then 30,000 the truck could pull that to and probably has, n so has our 2005 f350 with the 6.0 u people talkin shit bout 6.0s n 6.9s are dumb ther good motors

[65chevyguy]

No balls, can't even burn out in reverse? My friends f150 has a stock 400 in in and can roast em through 3rd. It's got a 4 inch suspension lift and a 3 in body lift sitting on 36 superswampers

[bowfishingtexas94]

I've got a 95 Eddie bauer that had a flowmaster on it and it wasn't quite loud enough so I cut it off and now I'm only runnin straight cats... If that is true dual exhaust could you tell me how you ran the drivers side exhaust pipe because there is no room to run it down that side on mine unless you want to go under the transfer case

[bowfishingtexas94]

@spencerbrown2007 you don't know what your talkin bout either! I don't know what your talkin bout a 300 but they only put the 302 and the 351 in these year models

[joedrummer2010]

Beautiful.

[Nitehawk770]

what you got for a transfer case in that beautiful thing? hope like hell its not a shit push-button unit.

[wheeler8801]

@Nitehawk770 a 92' probably not

[streetrunners626]

what size are your tires and whats the inches on the lift

[13098519]

Sounds like it swallowed up a quarter tank of gas just filming this..  Beautiful truck

[MrKTM121]

What kinda tire set up do u have?

[XxClemsonTigersXx]

dam thing sounds sick!!!! you running stock gears?

[cbooth2008]

how much did this run you, and was it easy to install, like could a beginner do it?

[Drummerpwilson182]

Is this true duals?? And are there catts on it or not?

[Sneadster]

38.5/16.5/14.5 TSL?

[mee5e]

aaaaaaa i love rednecks yall have a 351 in it or 290 or 429

[spencerbrown2007]

@mee5e

go die

If you knew shit about shit you could read that it has a 351 windsor in it.

They came with a duce and the windsor

I dunno what the fuck you're talking about with a 290 and 429.

[mee5e]

@spencerbrown2007 fuck you retard i aint gunna sit here and bitch at u. i no whats in it

[spencerbrown2007]

Then you ought to know it doesn't have a 290 (Whatever the fuck that is) and that they NEVER put a 429 in a fucking bronco.

This particular year came with your classic 300, the 302, and the 351 windsor.

Any other lessons you need?

[mee5e]

@spencerbrown2007 maby someone should think ino what model and engine it is. and maby u could think it could have any engine in it. its callaed a swap. hello retartd

[spencerbrown2007]

@mee5e

I suppose it could have a jet engine in it.

But why would you assume it did?

You were probably trying to name off some of the engines daddy talks about eh?

Stop trying to dig yourself out of making yourself look stupid and just give it up, son.

[jerryhowell9]

@mee5e maybe* you should go back to kindergarten and learn to spell

[ironmaidenkid455]

@mee5e a 290 would be a fuckin 6 cylinder piece of shit

[jerryhowell9]

@mee5e then why the hell did you ask dipshit

[MotoFoxRCR77]

now thats a hero flowmaster exhaust, and perhaps 36'' super swampers and a lift kids who this at home look up to this guy!!! haha

[07Deadsoul]

should light those tires up with low gears. I know my dad could with his 4:56 could like up some 39.5 iroks. big block 400 in his 79 bronco.

[MrTHIB1975]

I like thu black. Wish mine was black. I have mine on here check me out

[guitar1195]

im 14 but by the time im 16, i want that truck...a black, 1987-95 lifted ford bronco. it is an amazing you got there

[allanonmage]

what size tires are those? any other mods?

[HummerRecovery]

nice bronco! I need to get some flowmaster for mine

[1987hondaman]

wow thats a real mans toy

[805emerica]

what kind of flowmaster do you have?

[underling17]

how much lift did you put on for those tires, im gonna put 35s on my 88 and i was wonderin

[kdawg7070]

i ordered a flowmaster online for my 87 f-150, i needed a 3 inch but they sent me one that was too small so now i only have a magnaflow which doesnt sound as good. i want dual exhaust on mine

[kdawg7070]

i ordered a 3 inch flowmaster online...they sent me a piece of shit 2 and a quarter. i couldnt sent it back to i was stuck with a magnaflow

[StrokinPower06]

hey man what lift u running to fit 38.5's.. I have an 89 ..that would look sweet with that set up....

[Sloththebarbarian]

great lookin truck man, do they even make broncos anymore? i sure hope so

[MikeReiner]

The last Ford Bronco was made in 1996.

[Sloththebarbarian]

@MikeReiner that sucks, i like those trucks, the ones in the 70's were my favorite

[wysackyjr]

the bronco's production ended in 1996, ive got a black 96 identical to his lol

[fordbroncogirl]

I have a 92 Bronco with dual Flowmaster exhaust! It gives my 351 a nice growl!

[Dluniz09]

@fordbroncogirl i have a 92 ford bronco but mine has the 302 5.0L V8 so mine has aftermarket headers but dont know what brand, (possibly summit racing headers) then i have a brand new flowmaster 40 series muffler with new tail pipe. (single exhaust) my question is how did you get that dual exhaust on that bronco?

[idontknow87]

Wat exactly is the exhaust setup? wat headers? Cat or No Cat? 44?

[onlydanugz42]

If you Are not lifted on a 92 your going to rub with anything above a 32 On an 87-91 you can fit 35's with minor rubbing but 33's fit perfect

[bluepenguinehater]

i have 33s on my 92 bronco and all i had to do is move the front bumper forward about 1/2 a inch

[68dylan68]

@onlydanugz42 i have 33x12.50's on my 92, the rub slightly on the radius arms when the wheel is cranked all the way to one side. its really not that bad.

[mg82301]

hey i have a 92 ford bronco and i was wondering what exhuast system would be nice for it and loud...and will 38 inch tires work for it

[jvnmrles]

Bad ass Bronco. I have a 96 bronco I lifted it has 9 inch w/ 35 boggers. I will put some 38's soon. I was putting gas and some dude came at me ask me if I wanted to trade for a k5 blazer, I said naa! I'm alright....love my bronco.

[GermanGermanic]

Good choice! ;)

[Ascetiq]

That looks like Phil Margera driving that, lol.

[gbodypower]

Good looking Bronco! Don't see them without the rear fender rust too often, did you have that fixed already or is it all original?

[mustanglouie01]

original

[GermanGermanic]

I simply have to say it again...

I LOVE THESE GORGEOUS BRONCOS!!!

What a wonderful car!

God bless the holy FORD BRONCOS!

[xsonofthedevil666x]

purs like a kitten

[mudderchik622]

badass!

[GermanGermanic]

Does anybody know, how much this AWESOME Ford Bronco got lifted?

I would like to know how much taller he is than the normal ones! :)

LOVE BRONCO & HUGE AMERICAN V8...

GermanGermanic :)

[123ewq]

I would guess a 6in susp lift and 3 in body lift.

[ivanruiz89]

sweet! im goin out and gettin me a 89 bronco with a 351 backed by a c6 lifted 4 inches haha it needs a rear diff but im just gonna get a 9inch and be done with it haha. cant wait to put a exhaust on it

[Slideways81chevy]

Are fords any harder to lift than chevys?..im getting an 88 f150 on wensday and i heard they were harder to do.

[Skylarkman]

the Front axel is the worst part on a ford to lift that TTB is a PITA

[Dluniz09]

@Skylarkman and lifting the TTB's are expensive compared to any other solid axle vehicle.

[beastmp11]

beautiful truck. and it sounds great

[Drummerpwilson182]

your absolutly right it sounds AMAZING!!!

[broncoxl302]

savin up for gears myself damn things are expensive especially when you throw lockers in there as well

[wildfire305]

what type of suspension do you have on that Bronco? 6 suspension and 3 body.......

[mustanglouie01]

yes

[Dluniz09]

@mustanglouie01 what size wheels/rims are you running with those 38.5 tires? need more info cuz im in the process of putting a bigger suspension on mine. i currently have a rancho 4" suspension and running 33x12.50R15LT Mickey thompson Baja MTZ's mounted on miclkey thompson classic locks(15x10) on my 92 ford bronco

[jackinhard]

does it have a front drive line ...i cant see one .....is it 2x4 right now....u need to have one made or ????

[mustanglouie01]

4x4 works

[fordguyf1501994]

sweet ride too

[Jondun94]

thats a damn good lookin bronco man

[fordguyf1501994]

gears in rear are not made to be stressed in reverse

[mustanglouie01]

thanks for the heads up lol

[fordguyf1501994]

lol i use to do reverse burnouts lol found it out the hard way haha

[triadflc]

what gears are you running?

[mustanglouie01]

in that vid 4.10's now 4.88's

[TwiztidJustice]

which tires do you have on there?

i have a 90 with a 93 front

3in body 6in susp

lookin for new tires

[bjg1411]

how much you want for it

[mustanglouie01]

it is not for sale

[bskeiexc]

Hey man now is that just a straight up 40 series muffler and no other custom exhaust piping?

[mustanglouie01]

well it is two 40 series flows going to over axle turndowns

[richardguerra1213]

my bronco has a flowmaster it sounds badass!!!

[bronco302EFI]

is that truck a true dual, if so how did u do it i cant figure it out man?!?!?!?!

[wvstatetrooper]

i would like to know wht size inch lift kit is on there

[jackinhard]

what size is your lift

[mustanglouie01]

6" sus

3" body

[RJ33093]

Ive got a 93 bronco. with the 302 EFI and im just trying to find out what kind of muffler to put in it. that shounds great. though. What kind of flowmaster is on it??

[mustanglouie01]

40 series

[Southernpride005]

them tsl's look good man

[wvstatetrooper]

nice bronco wht size motor is in it.

[mustanglouie01]

5.8

[kjb86]

Fuck that's a sick truck

[Outkast87]

are you running headers? cuz i have flowmasters on my 92 bronco too and your sounds a bit deeper

[mustanglouie01]

nope just flowmasters

[stealthsniper96]

hey man. is that the stock axles on there? if so how are they holdin up with the 38's?

[mustanglouie01]

they are holding up fine. I don't really go hardcore offroading in it. They are holding up well on the highway though lol.

[blackesteyes13]

Hell yeah, buddy! I just bought a '92 Bronco XLT today!!!

Nice one you got there, I think mine's got pretty basic glasspacks, but it's dual exhaust.

[bronco114]

nice !!! i really like the sound.. whats the exhaust??

[68dylan68]

i love that thing

i have a 92 bronco XLT that i want to set up EXACTLY like that

i have a buddy with a 94 f-150 with a 6 inch sus and a 3 inch body lift and it has the same headlights and grill, and it turns a set of 38 inch nitto mud grapplers

im going to have my bronco like that i hope

need a job

[bdaddy23]

is that a SAS solid axle swap as well?

[mustanglouie01]

nope, just the ole ttb

[BIGJRE]

what size lif did you have to get to fit those 38.5s

[mustanglouie01]

6" sus

3" body

[PrOaM450]

nice ass bronco

what size tubing is that?

[mustanglouie01]

2.25

[dskrum]

Thats one sick bronco i am in the prsses of putting a 3 inch lift on my 1994 ford f150.

[kreigsmann]

is the cat still on it?

sounds pretty loud for just diff mufler

[mustanglouie01]

no cats

[kreigsmann]

NICE.

none of my cars have the cat on it n e mo

waste of space........

BTW that Bronco is SICK!!

if you dont mind my saying

[e30lucas]

T-REX GODZILLLLAAAAA

[jvnmrles]

i have a stock 96, thats my dream to monster mine. nice set up.

[bigvicsonora]

looks and sounds great,did you do anything else to the exhaust besides the flowmaster,check out my 93 bronco

[mustanglouie01]

no just duel flows and no cats

[jvnmrles]

bad ass bronco. is this street legal ???

[mustanglouie01]

thanks! around here I have no problems. but I think that it would be considered street legal.

[fordchick79]

nice.

[mudder89]

force its a dana44 front axle. look in the video it gots 5 lugs

[Force585]

nice bronco how high lift? what front axle? and what size and what kinda tires? i like your setup

[mustanglouie01]

6" sus 3" body, Stock front axle, 38.5 tsl super swampers, thanks