Rc p51 mustang holding on for his life composite arf

[alanjets]

If u have a look at my other videos u will see it on first flight, his hair is funny if he had some

[mciceteade]

I loved watching this video but what cracked me up the most was definitely the hair of the guy holding the plane. It was sooooo funny.

respect for this built thou. got to hand it to you.

this is one impressive plane.

do you have any videos of it flying?

[NuguSmedley]

Beautiful model, gentlemen. Happy Flying :)



[ussgrisham]

Finally a Stang that will teat the sky up like a Stang should I see way too many glow mustangs that look great on the ground only to get up in the air and lumber around like a dog not slice through the air like she should. Good show boys!

[brucey39]

I bet your neighbours just love you.

[ian8354]

@brucey39 I was just about to say the same ! then i read your post LMAO.

[cameronwick]

there would never be a video of two women doing this just like this in a backyard...only balding older dudes...lol

[Fk9Denmark]

Let the engine get some tempature before you throttle it up !! ;)

[winterocks]

What’s that old saying? “Only mad dogs and English men lay out in the mid-day sun” This is an accident trying to happen, every hit of the throttle….

[newlordmarc]

nice chainsaw... interisting style

[kiwisnowy]

@NathanNorris2407 you should look at Tony neihaus's models.

I think that's how you spell it anyway!

[TheFunnyman25]

is it supposed to be one of the Blue Nosed Bastards of Bodney?

[mychokehold]

START THE ENGINE ALREADY

[chrisdb1000]

Very nice!! awesome grunt from that setup - have an electric P51 1200mm Wingspan it pushes 70mph with my setup - it would look tiny next to this beast...and probably a tad slower....A really lovely plane guys....

OK now for the stupid people....Am sure the owner knows what is required for a stand and whether it is enough to do a simple engine test..

Also only safe place is ALWAYS behind the prop...man don't post if don't know what you are on about - prop fails it goes forwards...Newtons law

[firestone003]

put on a bigger prop and gas on it

[turkishflight1010]

isnt it amazing how a remote so small can control a plane so big for huge distances?

[gigicaly]

that's actually verry dangerous man please stop sitting behind the propeller or if you need someone get the guy you suspect sleeping with your wife.

I was passing by a similar size aircraft with prop. when a small piece of plastic out of nowhere got sucked in and pushed straight into my neck like 1 inch from my jugular. I was fine after they took it out but just saying its very dangerous.

So bottom line either get a guy you hate to hold that or get a better stand.

[tooserious4u79]

I think the holder deserves a beer

[randytosh]

if only it sounded like the real thing? what wher they supercharged Allisons?

[alanjets]

I have been building model planes for 25 years anything from foam to large scale and people who build no how hard they are to get right.So There are little people out there making silly comments who have never glued two pieces of wood together

[mikelagaffe]

@alanjets i'm planning to build a 3/4 scale model,wich i can fly myself...it isn't r/c anymore it's real aircraft XD...lots of time and effort in it

[dan821821]

@alanjets U can tell hes got his hand in the prop b4, nice welders glove. XD

[TTKMKaizen]

@alanjets Yeah, I've heard that designing model aircraft is even harder than designing comercial aircraft. The environmental factors have a greater effect on the craft and your tolerances have to be even slimmer.

[kiwisnowy]

@simcaP60fan you are definitely correct!

[alanjets]

@kiwisnowy he sure is correct !!!!!!!!!!!!

[ewt1985]

@alanjets Well I'll be blown if he isn't correct!

[NathanNorris2407]

@kiwisnowy wow this is great building skills man

[SpiderPig2501]

yet more people with to much money and no common sense, nice looking model but that really is dumb doing that on such a crappy stand leaning over it like that. only takes a split second and a foot to slip, then you have 2 parts of a nice looking model and maybe a trip to the hospital if your lucky.

[ericjkent]

I was going to get into flying RCs here in Van Nuys but after meeting some of the guys that fly at Van Nuys airpark I decided to do something else they were rude and acted as if they were doing some top secret government work or something a bunch of jerks.

[rpm303]

@ericjkent Dont let those jerks put you off. Try another flying field, most guys are only to glad to help a newbie out.check out some of the clubs, they have trainers and will teach you how to fly.

[whitehat55]

@ericjkent Definitely listen to rpm303. It's rare in the hobby for people not to want to share everything they know with you. It's addictive though, watch out.

[nutcase171]

@ericjkent depends on the day I learned how to fly on that field and the people there that day weren't so bad. depends on whos there I would say go to that field on a week day when no one is there.

[ericjkent]

@nutcase171 What good would that do? Anyway I bought some motorcycles so I am not going to be getting into RC planes anyway.My bikes let me travel and see the country which is much more fun then playing with remote control airplanes.

[TimeToRemix]

nice check out my vids and sub

[AsifBok]

WOW Impressive... now I'll go watch it fly :-)

(btw the guy holding the plane could do with some protective goggles!)

[nukebuilder]

I think your plane has more power than the car I drive :)

[441rider]

Amal carb no doubt,

[rolly873]

lovely plane lads! I fly foamies with my young son as we're just getting into the hobby and love it. There are so many arseholes on youtube ready to make nasty or stupid comments its laughable, just read the constructive ones, I do. Happy flying.

[OzParkPilot]

Great plane thanks for posting... If you can invest in a 7K plane...why not a better stand ???

[alanjets]

@OzParkPilot its such a funny shape for a stand to sit in it was just a quick run up the rest were done with the wings on it fly's realy nice

[SuccessorOfScipii]

@OzParkPilot he clearly thinks the stand is adequate for his needs, no need to waste money?

[mtElimFlyguy]

Nice plane guys I'd love to get my hands on it, my only thing is I woulda finished it and strapped it down before I tested the engine on a $5000+ bird on a crappy 25 cent stand. As far as the four blade prop and it not being scale you can't tell its a two blade while running and if those SCALE nit pickers want check their true scale warbirds i'm sure the real thing didn't have tires that said "dubro" or some other company on them.

[aseglkj]

I wish I knew how to quit you

[thedknuckles]

Thats one ballsy friend. You have a ton of money invested in that plane but the stand needs to be replaced...

[alanjets]

U realy need to get a life its a toy

[untold44]

@alanjets The fact you comment saying that, mean you only live on the computer to comment about someone else fun. Go play call of stupids. Now excuse me i have to go build my plane.

[jamiekenta]

@alanjets is it not your plane?

[alanjets]

@jamiekenta yep it is my plane and if u look at the other videos of mine u will see it fly and others

[begley09]

@jamiekenta Dont listen to him. just a troll.

[liOVERLOADil]

@alanjets I guess you don't have any hobbies? A very dull life you lead...

[zvent1]

@alanjets That's no toy. Most toys can't kill you!

[simcaP60fan]

@alanjets you really need to go back to school and start spelling right and also take a lesson in what´s called a hobby!! ignorant idiot!!

[alanjets]

@simcaP60fan who needs to spell when i can count money !!!!!!!

[dalilPoppaC]

One of the most carless things you can do, all you did here is to make it harder for the model r/c potenchels not want any part of our hobby, SHAM ON YOU Where was your BRIN, out in the rain???

[TheAlex010201]

wings?????



[matrix49A]

Ballsy motor Get a heavier friend and a beefier stand. (well done)

[evets00]

Very nice! I would love to see that thing fly!

[032490mf]

Cool! Sounds just like my Toro Lawn Mower

[562936]

One slip and 6 months of work and 3 grand go flying into the fence...

[TheSawnoffshotgun]

omg half the vid is about someone with a week arm trying to start a strong motor funnn!!!

[redr1150r]

Very impressive. I have a 43 year career as an aircraft mechanic (engineer) and have actually worked on real WW2 T-6s & P-40s. I also spent many years building & flying models. Scale are the most difficult to get flying correctly. The stand was not made for running a plane on, and they know it.

[tnasburypl]

Awesome airplane. I hope you guys break in the motor.

[BackRoadsOutlawsRC]

hahaha,,holding on for life!!!..hahahaha...its only a 70....run a big moki radial..!!!...you might have to get a bigger man to hang on!!!..hahahaha

[Yinhuwuduan]

good job

[kz6fittycent]

Wow...

[mamatalu]

invest in a better stand..seriously..

[alanjets]

A p51 4 bladed prop are big and to run one u need a gearbox reduction unit witch costs a lot of money so we decided to keep to 2 blade.

[starguard]

How come this plane has a propeller with two blades instead of four like the real mustangs do

[ChrisTechTV]

Oh dear you've caught your hand in the propeller. Oh, that's quite alright. I've grown quite tired of having a hand.

[roro879]

buy a starter motor lol

[Vrael1022]

@roro879 there isnt one powerful enough that would be easy enough to use

[roro879]

@Vrael1022 We had a weedeater motor on a p-51 and we started it w a sterter motor,with a big rubber grommet on the end,matched up perfect w the nosecone

[chepe371]

pulls to the left, like a real P51

[airste172]

Without the correct size 4-blade propeller on the nose, it's not a Mustang. Maybe a plow horse, but definitely not a Mustang! :P

[dansterwerecool]

The guy is holding on for his life

[RoysterPDP]

You guys are nuts!!

[multicolor0]

I wish I had money

[xxoocobraooxx]

I miss my p-51.... on maiden flight the thing went up then to the side almost like a nose dive...I just wish I should of let it fly a bit long in the air...