I accidentally broke off the resistor... can I fix it by replacing it with a new one if so which kind? I'm not the one who jtaged my xbox so I'm not sure what kind do I need. Please help. Its a zypher with hdmi on kinect dash.
im going to add my little bit of electronics experience to this thread for you to think about. JTAG requires short leads to work efficiently and that may be the reason you guys are getting partial errors on boot so even if your connections are good try shortening the leads. i just modified a pace 3100 satelite system using jtag. when it was done i had to remove 2 wires to allow the machine to boot so perhaps its because the jtag is being left in place - partially or completly. hope this helps.
My xenon does this I have no idea why. It worked ok for the first few days and then got this. Sometimes it just gives me a solid green light and no picture.
mine doesnt show up on my tv then got an e74 error but now it turns on perfectly but still does not show up on my tv!!!!!!! Does anyone know how to fix this or is it the video card?
My jtag has the same thing! i finally turned the xbox upside down and it went away, but i couldnt sync my controller. i turned it off and turned it back on and it doesnt work again. i need help
@oIXPMetallicaz hey i can helkp u my freind knows what to do ask him his youtube is quikscope4life he is 9 yrs olrrd though but he knows alot. he had the same problem but then he did a controller glitch
@oIXPMetallicaz I think that it might be because of bad blocks. I recommend if you have an original nand dump to erase your nand, reflash to orig.bin, see if it boots, if it does check for bad blocks, remap them, and create your xbr/freeboot dump. Hope that helps
i have the same problem and i opened and it dont has cable that you move thats why im am wanna get ps3
elkeke1500 1 month ago
Custom E79 XBOX for sale MAKE ME AN OFFER
tinyurl(dawt)com/blueledxbox
JahJah440 2 months ago
ok co9uld you maybe tell me how I can fix mine I upadted to the kinect dashboard but when I unplug my powercable and turn it on I got the e79
Reconatior 6 months ago
I accidentally broke off the resistor... can I fix it by replacing it with a new one if so which kind? I'm not the one who jtaged my xbox so I'm not sure what kind do I need. Please help. Its a zypher with hdmi on kinect dash.
videogamerevie81 7 months ago
im going to add my little bit of electronics experience to this thread for you to think about. JTAG requires short leads to work efficiently and that may be the reason you guys are getting partial errors on boot so even if your connections are good try shortening the leads. i just modified a pace 3100 satelite system using jtag. when it was done i had to remove 2 wires to allow the machine to boot so perhaps its because the jtag is being left in place - partially or completly. hope this helps.
007wolfen007 7 months ago
My xenon does this I have no idea why. It worked ok for the first few days and then got this. Sometimes it just gives me a solid green light and no picture.
intheshitter 10 months ago
fail i was looking for mine and i guess i lost it what do i do?
iTzKINGToXIC 10 months ago
mine doesnt show up on my tv then got an e74 error but now it turns on perfectly but still does not show up on my tv!!!!!!! Does anyone know how to fix this or is it the video card?
sharkman1998 1 year ago
how about soldering to under the mobo instead of the fuckking RF board...
grandtheftauto1233 1 year ago
@grandtheftauto1233 That would be way tooooooo easy
thugplayer 1 year ago
@thugplayer um, it's one point
grandtheftauto1233 1 year ago
@grandtheftauto1233 I was being sarcastic....
thugplayer 1 year ago
@thugplayer yes but seriously, not hard
grandtheftauto1233 1 year ago
I know how to fix this... Mabye lol depends
spy4561 1 year ago
No good, its touching the case itself wich comes in contact with ground as you know....
SultanTSK 1 year ago
hi i have a JTAG XENON with E79 , i dont know how to fix
what that?
diego0488 1 year ago
My jtag has the same thing! i finally turned the xbox upside down and it went away, but i couldnt sync my controller. i turned it off and turned it back on and it doesnt work again. i need help
oIXPMetallicaz 1 year ago
@oIXPMetallicaz hey i can helkp u my freind knows what to do ask him his youtube is quikscope4life he is 9 yrs olrrd though but he knows alot. he had the same problem but then he did a controller glitch
bobaloo1232 1 year ago
@oIXPMetallicaz I think that it might be because of bad blocks. I recommend if you have an original nand dump to erase your nand, reflash to orig.bin, see if it boots, if it does check for bad blocks, remap them, and create your xbr/freeboot dump. Hope that helps
broncofan112003 1 year ago
@oIXPMetallicaz u got a Kv virus Bro u need to get repair yu need to reflash your ORIG NAND
xCaLiNaTioN 1 year ago