i got a system installed my amp would turn on fineley everyday but now it stopped turning on but when i run a piece of wire from the battery cable to the remote wire it turns on is my remote wire bad?
If you dont have a remote wire on a stock deck you can loop a wire to the remote and 12volt on your amp but then you need to use a switch on your power wire or it will kill your battery. If you do stay with a stock deck that dose not have output for an amp you can use a converter to run a signal from your rear speakers. It can not be done without a converter.
dude thanks alot my cousin hooked the system for me but it had problems with the battery watched this video and it was easy i dont know shit about cars but i gave it a try while i watched this vid thanks dude
okay on the remote wire im a little confused, on the back of my radio theres a tag on the back with blue wire with a white strip across running through and it says system remote control, am i suppose to hook up my remote wire to my amp with that?
yes you connect it to that ...i had the same problem my cousin had hooked it up to a yellow wire which caused my system to stay on all the time whether the car was on or off........i connected it to to Remote channel that had a sticker and it worked
@amritaka2qw32 yes that wire turns the amp on and off witth the stereo,you got MAIN 12volt straight from the battrey or alternator,then negative witch is the ground that needs to be grounded to a good clean bolt on the car,then theres the Control or what ever it says on your amp that goes to the blue wire and some amps have antenne and another one for amp so you can have a power antenne
dude how did you put those cables from engineroom through to inside of car? please explain me! i've bought those stuff but can't install cause dont know how to get cables in because i cant find any holes or somethinglike that to do that? please answer quick and srry for bad english :)
some cars already have a hole going through the firewall of the car, which is what i used, if not you will have to drill a hole going through. if you dont feel confident enough go down to any car audio place and im sure they will be able to help
im putting in a 2nd amp in my car and im wondering if you can take the remote wire from the 2nd amp and run it to the first amp to combined it with the first remote wire thats already connect up front.
I'm not being a smart arse when i say this, but the tool you use to undo the screws on the amp, you dont need to keep on taking it on and off. It is designed so you can simply turn the handle back the other way. If it does not turn there should be a thing you can switch. around 3.00 mins. Sorry if you take this to offence it was just bugging me while i was watching :)
I'm not being a smart arse when i say this, but the tool you use to undo the screws on the amp, you dont need to keep on taking it on and off. It is designed so you can simply turn the handle back the other way. If it does not turn there should be a thing you can switch. around 3.00 mins. Sorry if you take this to offence it was just bugging me while i was watching :)
man dogg with ur video i wouldnt of never got it done thanks to u i can finally hear music only one qustion every time i turn it of or on i makes a loud thoud and im really scared they might get jackup so if u know wats wrong or anybody please help
@eddie6392 sorry if them wires are to cheap for you, its only a tutorial showing others how to install. well done for using 1/0 gauge though, your so cool. i made this for coursework, and now im willing to help people who want it, so only comment if its a questions or anything of any other use... understand?
ok but i kno ppl who look at these vids and see what type of wires u use and try and get the same ones then after some time the wires melt and sometimes even start on fire i think for any car system yea 8 to 4 gauge and the only reason i use 1/0 is becuz i have 3 batters and 5 amps pushing out little over 12,000 watts
Wow that was amazing!! i just installed an amplifier in my car using your instructions! it was so helpful, and it didnt take me long at all. Thank you so much for this video and i hope you get the best you can for your coursework because it was seriously the best instructions.
i got a system installed my amp would turn on fineley everyday but now it stopped turning on but when i run a piece of wire from the battery cable to the remote wire it turns on is my remote wire bad?
does the remote wire need a inline fiuse to work
skaterdiehgf 2 weeks ago
If you dont have a remote wire on a stock deck you can loop a wire to the remote and 12volt on your amp but then you need to use a switch on your power wire or it will kill your battery. If you do stay with a stock deck that dose not have output for an amp you can use a converter to run a signal from your rear speakers. It can not be done without a converter.
TheKingclown1000 1 month ago
WTF is a punto??
ozgrimble 2 months ago
Wow am I glad you have a punto. Now I can follow this literally step by step
neekface 7 months ago
that was the worst video ever...
rylan4415 1 year ago
dude thanks alot my cousin hooked the system for me but it had problems with the battery watched this video and it was easy i dont know shit about cars but i gave it a try while i watched this vid thanks dude
eripena 1 year ago
@eripena
glad it was helpful
dr10nov 1 year ago
okay on the remote wire im a little confused, on the back of my radio theres a tag on the back with blue wire with a white strip across running through and it says system remote control, am i suppose to hook up my remote wire to my amp with that?
amritaka2qw32 1 year ago
@amritaka2qw32
yeh thats the remote matey, make sure to either crimp or solder it tight
dr10nov 1 year ago
@dr10nov ok i got it. thank you sir :)
amritaka2qw32 1 year ago
@amritaka2qw32
yes you connect it to that ...i had the same problem my cousin had hooked it up to a yellow wire which caused my system to stay on all the time whether the car was on or off........i connected it to to Remote channel that had a sticker and it worked
eripena 1 year ago
@amritaka2qw32 yes that wire turns the amp on and off witth the stereo,you got MAIN 12volt straight from the battrey or alternator,then negative witch is the ground that needs to be grounded to a good clean bolt on the car,then theres the Control or what ever it says on your amp that goes to the blue wire and some amps have antenne and another one for amp so you can have a power antenne
brucekirk89 11 months ago
@brucekirk89 ok i had gotten that all hooked up. now do i leave the stock car amplifier wire alone or do i hook that up as well?
amritaka2qw32 11 months ago
i have no idea on how to connect the remote wire
mirodriguez888 1 year ago
dude how did you put those cables from engineroom through to inside of car? please explain me! i've bought those stuff but can't install cause dont know how to get cables in because i cant find any holes or somethinglike that to do that? please answer quick and srry for bad english :)
csjake92 1 year ago
@csjake92
some cars already have a hole going through the firewall of the car, which is what i used, if not you will have to drill a hole going through. if you dont feel confident enough go down to any car audio place and im sure they will be able to help
dr10nov 1 year ago
im putting in a 2nd amp in my car and im wondering if you can take the remote wire from the 2nd amp and run it to the first amp to combined it with the first remote wire thats already connect up front.
Gangsta4ife 1 year ago
@Gangsta4ife
yeh u can do that mate
dr10nov 1 year ago
for safety try disconnect negative cable of your car batt. before connecting all wire.....and pull off fuse or amps of power cable(+cable)
yuuki844 1 year ago
FUCK ENGLAND
skatinbutnohatin 1 year ago
nice voice fucking foriegn piece of shit. and nice way of using the wratchet
HunterHitler 1 year ago
@HunterHitler nice spelling
drumbum615 1 year ago
do u run off battery or put it on acc power? or a switch?
subwofer56 1 year ago
@subwofer56
you run it off battery but the remote wire is what turns the amp on or off regarding to wether your car is on or not
dr10nov 1 year ago
why does he keep removing the ratchet its annoying rofl
comentationmachine 1 year ago
What does the ground cable do? Do you need one?
oOMRPETEOo 1 year ago
@oOMRPETEOo yes, it completes the power circuit
isctony 1 year ago
This has been flagged as spam show
I'm not being a smart arse when i say this, but the tool you use to undo the screws on the amp, you dont need to keep on taking it on and off. It is designed so you can simply turn the handle back the other way. If it does not turn there should be a thing you can switch. around 3.00 mins. Sorry if you take this to offence it was just bugging me while i was watching :)
chrisxxr 1 year ago
I'm not being a smart arse when i say this, but the tool you use to undo the screws on the amp, you dont need to keep on taking it on and off. It is designed so you can simply turn the handle back the other way. If it does not turn there should be a thing you can switch. around 3.00 mins. Sorry if you take this to offence it was just bugging me while i was watching :)
chrisxxr 1 year ago
do you not know how to use a ratchet?
thegaysnowman 1 year ago
you forgot to disconnect the negative terminal
jsteuer21 1 year ago
man dogg with ur video i wouldnt of never got it done thanks to u i can finally hear music only one qustion every time i turn it of or on i makes a loud thoud and im really scared they might get jackup so if u know wats wrong or anybody please help
gmcserria23 1 year ago
@gmcserria23 try turning the sub volume down
dr10nov 1 year ago
@gmcserria23 its your remote wire, u need to run it from the back of the radio
derwinmicheal 1 year ago
@gmcserria23 that means u have a bad ground
sschriver110 1 year ago
wow thoese wires a so cheap i woundnt trust them at all the wires i use are 1/0 gauge
eddie6392 2 years ago
@eddie6392 sorry if them wires are to cheap for you, its only a tutorial showing others how to install. well done for using 1/0 gauge though, your so cool. i made this for coursework, and now im willing to help people who want it, so only comment if its a questions or anything of any other use... understand?
dr10nov 2 years ago 4
ok but i kno ppl who look at these vids and see what type of wires u use and try and get the same ones then after some time the wires melt and sometimes even start on fire i think for any car system yea 8 to 4 gauge and the only reason i use 1/0 is becuz i have 3 batters and 5 amps pushing out little over 12,000 watts
eddie6392 2 years ago
cheers matey if you need any more help just ask
dr10nov 2 years ago
GOOD VIDEO
KKLANERO323 2 years ago
Wow that was amazing!! i just installed an amplifier in my car using your instructions! it was so helpful, and it didnt take me long at all. Thank you so much for this video and i hope you get the best you can for your coursework because it was seriously the best instructions.
danimimi269 2 years ago 7