@braylingsaidbrayling thanks for commeting. ok if you really like these trucks then i recomend not to buy eather one. because their are a lot better scalers out their. the Axial SCX10 TR is much better in performance and apperance. it does however not come with a hard plastic body it has a 2mm lexan body but you can buy many differant bodies that look nice for it. RC4WD.com has many differant moddels to chose from. for a new hobbiest i would recomend the axial because its rtr and only $280
@braylingsaidbrayling as for the capabilities of of the tamiya it sucks as far as crawling or anything else as far as that goes. they are good trophy trucks.
Why cant u tamiya boys ever figure out how to run a wheel/ tire combo that looks right? I can always pickem out of a crowd. Pretty sure most folks know tamiya rolling stock sux. We know this cuz nobody ever buys new tamiya tires. And dont get me started on those enormous front bumpers!
thanks for your help but one last question do i have to have 2 servos 1 for sterring and 1 for the gear shifting or dose it even need one for the transmisson
yes 2 servoes one for the trans and one for sterring. for the stearing servo a high torque is recommended adn a standard for the trans.( if you do not have a 3 channel radio yet you can omit the servo for the trans and it will stay in second gear all the time and you can manuelly chang the gears with a rubber band.
It depends on whitch body you like better. The f350 is a 1/10 scale and any tire bigger than a 1.9 looks to un releastic aswell as barly fitting. The toyota is really a 1/9 to 1/8 and 2.2 rims and tires fit and do not look to bad. The toyota has a factory 1/2 body lift so bigger tires fit better. The toyota does not look as good as the ford does from the side because both trucks use the same frame and trans and the toy sits of the frame higher.
I think Id rather some some crack. At least it is respectable hobbie for adults.
2012goingNutz 2 months ago
Great vid! Subbed! Sub back? =D!
joerirockcrawler 5 months ago
Hi is the high lift straight out of the box? looking into buying one but want to know what its capable of out of the box, thanks
braylingsaidbrayling 10 months ago
@braylingsaidbrayling thanks for commeting. ok if you really like these trucks then i recomend not to buy eather one. because their are a lot better scalers out their. the Axial SCX10 TR is much better in performance and apperance. it does however not come with a hard plastic body it has a 2mm lexan body but you can buy many differant bodies that look nice for it. RC4WD.com has many differant moddels to chose from. for a new hobbiest i would recomend the axial because its rtr and only $280
runions79 10 months ago
@braylingsaidbrayling as for the capabilities of of the tamiya it sucks as far as crawling or anything else as far as that goes. they are good trophy trucks.
runions79 10 months ago
My RC Helicopter can do that better.....
MegaMrDolphin 11 months ago
Why cant u tamiya boys ever figure out how to run a wheel/ tire combo that looks right? I can always pickem out of a crowd. Pretty sure most folks know tamiya rolling stock sux. We know this cuz nobody ever buys new tamiya tires. And dont get me started on those enormous front bumpers!
jado6006 1 year ago
were did you buy this?
dominik767 1 year ago
were did you buy this?
dominik767 1 year ago
@dominik767 any good hobby store or on line at tower hobbies.com
runions79 1 year ago
hey if you keep the diifs locked, does it crawl better?
JuniorPros118 1 year ago
@JuniorPros118 Yes, a locked diff supplies power to both wheels insted of one wheel in an open diff
runions79 1 year ago
Its gotta be embarrassing for you guys when people see you out in the woods playing with these toys.. admit it.
thehuntman47 1 year ago
how much would you sell the 1 in front for
bigbadtruck1 1 year ago
@bigbadtruck1 the high-lift is know my hummer project but the f350 i would sell for $500 with the toyota body
runions79 1 year ago
thanks for your help but one last question do i have to have 2 servos 1 for sterring and 1 for the gear shifting or dose it even need one for the transmisson
trx250vrsltz250 2 years ago
yes 2 servoes one for the trans and one for sterring. for the stearing servo a high torque is recommended adn a standard for the trans.( if you do not have a 3 channel radio yet you can omit the servo for the trans and it will stay in second gear all the time and you can manuelly chang the gears with a rubber band.
runions79 2 years ago
do the axles come locked or with a locker?
trx250vrsltz250 2 years ago
their is a screw inserted in the axle to make it locked or open
runions79 2 years ago
i like both of them but how much was it to buy these
humvee600 2 years ago
$350 each plus mods
runions79 2 years ago
i like the hilux =]
c4d3t 2 years ago
what suspension is the ford runing on ?
ARZ818 2 years ago
custom 4 link front and rear
runions79 2 years ago
join our new group- youtube/group/rc4x4. we all gather there
Borneosafari 2 years ago
nice toys?
aquadetanthony 2 years ago
what kind of mods can you get for them.
I am thinking about getting the hi lift tundra when it comes out.
Marreroboy1z 3 years ago
Comment removed
rcking24 3 years ago
have u ever thaught that its 2 different people?
rc4x4tundra 2 years ago
where did you get it from
carking777 3 years ago
i got both from tower hobbies the toyota is stock and the ford is highly moddified
runions79 3 years ago
is there al ink to the place where you got them?
noremorse126 3 years ago
what are some on the mods on the toyota?
great scale action!
Galltrial 3 years ago
the toyota is stock
runions79 3 years ago
hey i'm thinkin on gettin the f-350 or the hilux what 1 do you think i should get
smaxx456 4 years ago
It depends on whitch body you like better. The f350 is a 1/10 scale and any tire bigger than a 1.9 looks to un releastic aswell as barly fitting. The toyota is really a 1/9 to 1/8 and 2.2 rims and tires fit and do not look to bad. The toyota has a factory 1/2 body lift so bigger tires fit better. The toyota does not look as good as the ford does from the side because both trucks use the same frame and trans and the toy sits of the frame higher.
runions79 4 years ago
Why didn't you paint them?
Tboninator 4 years ago
There not finished
runions79 4 years ago
The 4link on the 350 is custome made in my garage.
runions79 4 years ago
where did you get your 4 link from?
marctc3 4 years ago
When the toy is finished it will crawle like me f350 does but a little better.
runions79 4 years ago
No the toy is a long way from being finished this was to test all mechanics and electronics
runions79 4 years ago
Is it finish?
mr0norway 4 years ago