slash 4x4 driveshaft problems. PROBLEM SOLVED

[xXSISORXx1996]

u hawe to get the aluminium that works for me ;)

[nrodela66]

Get the MIPS

[MrCruiserhead]

thier not aluminum there hardend steel

and get those but remeber to use lots and lots of thread lock

[warofsamurai]

wath are MIP's?

[TheSensfan11]

@warofsamurai MIP is a company that makes upgrade parts such as driveshafts and CVD's(Constant Velocity Drives) which is what i have on this truck.

[suzukiboy26]

the holes in the yoke dont get bigger from unbalanced tires they get bigger because there plastic and the torque that those driveshafts go threw pushing that heavy truck i just put 2wd driveshafts on my 4x4 ultimate and they havent broke for about 3 months of racing, bashing, and street driving with a 3 cell lipo.

[flower6784]

no aluminum they bend easy

[killdaboosterskiia]

first get some new cloths! then have your your dad kick your ass... then stick with stock on every thing don't spend to much on it. traxxas is only good for bashing not racing...

[K1NgS120]

@killdaboosterskiia what r u talking about u dont even have to spend that much money to race and plus u still want to upgrade parts when ur bashing so it doesnt break

[TeaGen100]

Ok just cut little tiny squares into your tires next time it happens, vibrations will go away and it wont split if you cut them really small. :) good luck

[everybodyelsedoes]

hey man i have the same thing happened to mine i was wondering if you whent to mip and do they work better how you fixed it?

[TheSensfan11]

@everybodyelsedoes Yes, I did get the MIP and they are phenominal! Mud and water in the foam doesn't matter to them! Water in the foams can put strain on other parts of your drivetrain even with the MIP's. They also add a fair amount of weight, but I'm still winning races!

[westwing23]

@TheSensfan11 dude,now that you got MIP..you can go ahead and run 4s ;)

[speeddemon241]

i have the mip but not the heavy dutty and it never breaks

[adanali63]

mip



[yahmon421]

that bathrobe is pretty cool where did you get it Jcpenny or Belks from your granny or somthing

[slash4x4lipo]

not alum. steel

[stickles123]

take a nidel and poke 10 or 15 tiny holes in the center of your tires pick it up off the ground hit the gas and all the warter will fly out of them.works very well i do it all the time wont hurt tires.

[tomkoas]

Why would you ask that. Nah just kidding spend a little extra get the MIP. Front and rear. Get aluminum uppers to and rpm a arms and check out the Outerwear shroud. Tear it up.

[YoShaquaan]

mip

[fifmasta]

Nice Bathrobe xD

[TheSensfan11]

@fifmasta ya man its the best!

[steven3654]

@fifmasta lmfao

[stealthrc53]

get cvd's there awsome i got them in my mini revo they work great so get cvd's kinda expensive but worth the money

[slash4x4lipo]

but mips rust fast

[slash4x4lipo]

i have a slash 4x4 and i have the same problem as you

to solve this problem, I bought mips

[shank867]

stop driving it on the road. i use the stock parts and i race every weekend and not a problem with the stock parts. o and im using a novac 4.5 turn motor with a 2s lipo 

[hondazaynefun]

mip

[hunterboy502066]

mip

[Bugman215]

I would stay stock unless ur going to 11.1v if ur runnin 7.4v thoughs are fine. I've had mine for a while and the only time I've had any problem with stock stuff is if I ran my 3s 4 a while.

[pcracer2]

@Bugman215 haha the second i put my 3s in my bandit my yokes were toast. had to buy steel ones but the axle itself is still running strong.

[swas79]

MIP, one time buy

[crazybearrc]

MIPs dude. The mips cost alot but they are worth every penny.

[Bunter852]

mips

[WestRC12]

those are axels not drive shafts haha the blue rod down the middle is driveshaft but use stock for now untill u order those