RC constructionsite scale

[JBecko13]

Can you buy them or do you have to self build them? if you can buy them, where from?

[diggingwithmartin]

i wanna bring my r.c. equip over and play!!! we would have a blast!!! yuor video is one of the best i have seen so far, and i have seen about 5,000 or so. this ROCKS!!!!!

[diggingwithmartin]

super sweet!!! i wish i had a really nice area and at least one person to operate one of my trucks or loader or just the camera, i have to do it all and it makes slow, boring videos. i lova this video!!!

[vexviper]

Love the dog walk by lol

[marhund]

@hpibajajumper

You will find the answer among the many comments of my videos ;) Also to THIS video.. Just start reading.. Then save some.. Then buy one.. Enjoy:D

[hpibajajumper]

where do you buy some of these rc's. they are so dang cool. i want one pretty bad.

[sammyryan10]

how many people are there controling all of these

[marhund]

@sammyryan10 One for each machine.

[ehell69]

That was so cool !!!!!!

[marhund]

Online...  :D

If you read some of the posts below you shall find the answers you seek :)

Checkout eg. w w w . rclastebil. no or w w w . scale4x4rc . org.

Good luck,

[sigurd624]

where did you buy them ???????? the cars

[slipstream71]

i wish i had these when i was 10

[XxRemixerzxX]

Dear Santa...

[marhund]

No.... Its much cheaper then that.....

I think it is about 7000-10.000 USD... So its almost for free.. right! :lol:

[oppisiteofafredfan]

26 thousand US dollars!!!! Holy crap!!!!!

[2020skywarp]

IRT Deadliest Roads ; )

[johnnyfarnham]

would council allow me to develop the site and and put up 6 doll house condos??

[legoairsoft12345]

Nice looks like loads of fun :)

[misterbob72]

how many peplo wher hellpin u do this

[marhund]

Well. It says in the comments below all the prices... :poke: each model €3000-4000. Trucks Prox €2000. Total for the Hole site...prox €20.000,- inkl controlles and all...

[camperkid300]

how much is that kit

all together

[marhund]

I made a general respond on my channelsite but ok then :) This machines comes from more and more producers now.... Search the google on Stahl modellbau, Wedico, Vario earthmovers, etc etc, and you will find the websites. YT does not allow to wright the adresses on comments.. Also visit w w w . scale4x4rc . com and you will find lots of info on different model. Most of what U find in my vids are Tamiya, Stahlmodels. but most of them is modifyed for personal-looks :)

[ch4rlietaylor99]

where do you get rc trucks, lorrys and trailers please take your time to reply to this comment!

[marhund]

@ch4rlietaylor99

Well. First of all it would be enogh to put the comment on 1 of the vids :lol:

Second.. if you take your time looking trough my vids and the comments on them you will find the answers you are looking for... Good luck :)

[ch4rlietaylor99]

@marhund im sorry for putting a comment on every vid lol but would you just tell me ?

[hager999]

I love watching the people that build they're own roads, bridges, and all that stuff JUST with the R/C's :') makes me so happy :)

[marhund]

Shore.. Why wait... That shoud be no problem. All tech is available.

I have also tryed out to run the models with a Fatshark videogogglesystem with headtracking and its great. If you use a Sanwa SG10D 2.4gHz radio you will also be able to controll all the models trough the same radio... You just need to visit some robotic sites to find how to steer the controll trough the computer :) - its all available :)

Good luck and be shore to share some vids when you make and test it :)

[TheRussianhippie]

my dream when i was 5 was to run a few construction toys all at once via rc from my laptop i might start doing it soon

[EpicKill55]

and then it rains

[BrotherCoyote]

cool

[24chancer]

so to make a RC layout map u use RC construction veichles to make it?

[questimator]

what website do u get them from??

[marhund]

@questimator

Read the comments allready posted on the video and you will find your answer :)

[Dplasher68]

Where Can I buy The EndDump

[marhund]

@Dplasher68

Take a look at the comments below and you will find the answers you are looking for.

[tytan0008]

powiem tak moj koparka z hydrauliką kosztowała 300e sam zrobiłem i jest to całkiem proste na youtube//model koparki hydraulicznej//

[marhund]

Visit Ric at  3x w. Gardentrucking. Com

[geminis4ever1]

any 1 know where to get these in the US?

[elmutto1]

that guy didnt have a hard hat on!

[marhund]

Read the comments and you will find answers :)

[mrps311]

were did u get the volvo from i want one

[marhund]

Hi. The machines you see in my videos are a litle expensive. They are made of aluminium al over and runs on real hydraulik oil. This makes them cost from 3000 euros and up (5000USD). Then you can look at w w w . Stahl-modellbau. com , w w w . wedico . de, or visit w w w. scale4x4rc . org and go to forums and go to the agriculture/industrial equipment category. Good luck :)

[traxxasemaxxrules]

i just am 12 and i want to get into rc construction im in rc cars but im bored last night i picked up a 50 dollor new ray excavator it digs and all thet but but i need more power could u guys teel me how to build one????

[marhund]

This model is from Stahlmodellbau in germany. Also Wedico and Vario has exavators with hydrauliks in 1:14.. Best of luck.. Its fun :)

They cost from prox 3000 euro and up.to 5-6000 euro.

[tommy33401]

Please Please tell me where u got the excavator. or was it Home Built

[marhund]

It is a real hydraulik pump running at 15 bar pressure with ordanery H11 oil and real sylinders working both ways just like on a 1:1 machine :)

The only electrick engine is the 540 engine running the hydraulic pump :)

This is running on 11.1v (3s lipo-battery) and lasts for about 1 hour on a 3500mAh battery.

[MrKaddan]

Real hydraulics in the excavator, by real meaning oil driven, or "fake", meaning air pressure or a treaded rod being driven by an electrical motor.

[tommy33401]

nice video

[tommy33401]

Where can u get a trackhoe and dump truck?

[ouigipsyjo]

hi guys really fantastic well done I have to find out how to put my construction machine's on here, I love what your doin if you ever come to Wales UK come chek me out you'll be more than welcome.. Jo

[thekoalak]

Perfect I juste love it wonderful wish i have wone of this but i caint found it ..

[marhund]

@thekoalak

Yes. They are quite expensive. Prox. 3000 euro a pice. Trucks. Prox. 2000 euro.

more info at our website; . rclastebil . no or my models at . stahl-modellbau . com (Need spaces to be able to wright webadresses..

[sivertsen87]

Forstod det slik at du solgte disse hærlighetene?

Hva ligger disse på i pris hos deg i så tilfelle? :D

[sivertsen87]

Forstod det Slik at du selger annlegs maskiner?

I så tilfelle hva ligger stahl a25c- liecherr 922 og tamiya i pris hos deg pr stk??

[grimstad84]

ja, har registrert meg på det forumet men får bare opp

Du kan ikke starte nye tråder

Du kan ikke svare på innlegg / tråder

Du kan ikke laste opp vedlegg

Du kan ikke redigere meldingene dine og ikke kan jeg sende pm til noen som kan hjelpe meg med dette :(

[marhund]

Mer informasjon kan finnes på.

For more info look at our forum

rclastebil. no

[grimstad84]

@marhund får bare opp dette etter jeg regga meg på forumet.

Du kan ikke starte nye tråder

Du kan ikke svare på innlegg / tråder

Du kan ikke laste opp vedlegg

Du kan ikke redigere meldingene dine

[marhund]

@grimstad84

Veldig rart. Forsøk å sende en mail til administrator, Børge.

Bill @ pw-drift. com. Han fikser det sikkert kjapt :)

[grimstad84]

@marhund heisann. da har jeg sendt mail, men etter 4 timer så kom mailer demon med tilbakemelding at adressen ikke stemmer?? du kunne ikke være så snill og gi han en pm på forumet? :)

[grimstad84]

hei marhund,

Hvor har du eller dine kompiser skaffet scanian med tipp?

holder på å bestille en trekkvogn med henger og ble jo helt gærn da jeg så den tipp bilen :)

håper på svar :)

[marhund]

@grimstad84

test

[marhund]

@grimstad84 Vi kjøper standard Tamiya biler og forlenger rammen ved hjelp av aluprofiler fra Bauhaus. Kassen bygges av Styren (plast) med alu-sliteplate i bunn og vegg og tipp lages med en nedgiret elektromotor og gjenget stang (spindeltipp).

[marhund]

@grimstad84

Ønsker du en tipp laget for deg kan du kontakte Ole (Bjørne) på forumet. Han lager tipp og tippkasse for ca 2.200,- tror jeg..

[semisrule]

man u guys are so lucky u have those made where u live.

=(

[marhund]

The trucks are Tamiya trucks that are rebuildt.

The Volvo A25C articulated dumper and the Volvo excavator is products from Stahl-modellbau as I retail (sell) in Norway. (The excavator is originaly a Liebherr 922, but is redesigned by owner in Norway. Uniq builds are the coolest.. And another customer hase made his L922 into a Hitachi 210 :)

[rockandroll626]

where did you get your trucks and diggers 5 *

[marhund]

All this models are 1:14,5 in scale :)

[Flymigi]

Nice!! 5* what scale is the excavator??

[TheShiftyjnr]

very good vid m8 could u tell me were i can get 1. heep the vid rollin in

[mimmi12345]

5/5 :D

[tracksntreadslou]

very good constrution site 5/5 keep the vids coming