Killer RC's Killer Bee v1 Remote Kill Switch on Baja 5B & 5T

[marcus730743]

is there a way to have it automatically apply all brake?

[pb2themax]

@marcus730743 No. The kill switch has nothing to do with the servos. Most modern radios have a built-in failsafe in the radio receiver that can make the servo apply brake. You just have to read the radios manual and set the failsafe appropriately.

[pirape]

what happens if the baatery pack gets unplug while the engine servo is at full throttle?

[pb2themax]

@pirape The Kill Switch would loose power and cause the circuit to close, which would ground out the engine spark, which would kill the engine immediately. 

[CrazyBoyx199]

The Baja v2 doesn't not come w a fail safe u have to install yourself. If u don't believe then you car goes on its own then u will.

[KOSTASVALE]

if it does this ,then any signal of failsafe want be able to set the servos in fail safe positions!!please let me know how that works!!thank you!!

[KOSTASVALE]

hi!let me understood the usage of that gadjet!!in the bigging of that vid you said that with that switch you can prevent a throtle servo burn !!this thing works either if we have or not a fail safe,right??if we have fail safe when we closed the trans. with the receiver on the fail safe will put dervo in brake porition!!in this case the kill switch will reset the servo in neuteral position!in other words that thing cut off automatically the power in car?

[matty008960]

if you had a real HPI 5b v2 they come with killswitchers

[pb2themax]

@matty008960 What are you talking about? This is a real HPI Baja. None of them come with a remote kill switch. They only come with a red push button on the engine. You have to buy a Killer Bee and install it on the car.

[matty008960]

@pb2themax i think your abit confused about what i said i was not talking to you personaly i was saying, if you had a real 5b v2 that comes with a killswitch that works fine whats the need for this. ?

[frddyj1970]

@matty008960 ... you obviously don't own a baja.

sweet products kent

[speedstangsixtyfiv3]

are any of the killer rc kill switch's compatible with 2.4ghz hpi radio's like the one that's standard for the 5t?

[pb2themax]

@speedstangsixtyfiv3 There is not any brand or model of kill switch that will ever work with that radio. It's because of how they designed the receiver. It's a stupid design. Sorry.

[speedstangsixtyfiv3]

@pb2themax ahh man i really like the killer bees but i dont feel like upgrading my radio....what tires are those on the 5t and are those the stock outlaw wheels/beadlocks just painted? looks good

[alwaysright5]

No soldering? I love it!!!

[baby2kent]

So this will work with the spectrum systems correct?

[pb2themax]

@baby2kent Yes. Check our website and see the radio compatibility chart.

[blingblinginyaface]

i bought this product in the end and its fantastic!!! worth its weight in gold, the cost of a broken baja aint worth thinking about, good work killer rc

[blingblinginyaface]

dam! i need this for my 5B, can i get tis in the UK?

[pb2themax]

Yes. We ship anywhere in the world. Just go

to our online store.

[Losiracer4life]

Looks like a great product. I might have to get one for my new 5T.

[theiceman1972]

can I buy the noise box and the led by themselves? I picked up the kill switch already. i did not see the options listed solo on the site.

[pb2themax]

Yes, the buzzer and LED can be bought separately. Check the Store page on our website.

[pb2themax]

They're actually white LEDs that I custom install behind 3 lenses, inside the DarkSoul Racing plastic roof scoop.

[BashSession]

I am dying to know, what song is that at the very beginning and end of this video?

[pb2themax]

The song is called "Going For My Lungs" by The Fold

[nilseeert]

were can i get that??

[pb2themax]

Check the web address at the end of the video.