Cammed V6 Mustang w/Longtubes

[ToneCityGraphix1]

what r tha specs for your cam i want that exact exhaust tone

[Gilly4987]

where did you get your cam from? I currently own a 2000 mustang v6 and cannot find one

[mustangaddicted]

A cammed 6? i can respect that, keep at it brother.

[6Stang99]

@mustangaddicted Thanks. But I haven't had this car for a while. old this and picked up a blown Foxbody. Now sold that and looking for a new Stang to play with. Thinking a 94-95 5.0 or 96-98 GT would be a lot of fun.

[meswku22]

what brand and size tips are those

[6Stang99]

@meswku22 3.5" MBRP dual wall tips

[meswku22]

dou run a cat

[6Stang99]

@meswku22 The first setup in this video had cats. The second setup with the long tubes was without cats.

[blackened300a]

That sounds exactly like in the movie "Christine" when she was being pulled into the garage for the first time. 

[camelsamul]

what kind of cam do you have?

[6Stang99]

@camelsamul Go to SuperSixMotorsports and look at their "Lumpy" cam. I'm pretty sure that cam has the same specs as mine.

[civic0897]

how much did the cam upgrade hurt the gas mileage?

[6Stang99]

@civic0897 This car got roughly 200-250 miles per tank. So the gas mileage wasn't really good at all. I drove it for fun too, so that might have something to do with it.

[madonahue13]

Thanks for posting man! I actually have exactly the same exhaust setup as you did in your old setup with the BBK shorties, Pypes X and Flows 40s. What made you swap the X for the H? I would love to do this cam someday, where did you get yours and how've you like it since?

[stang1066]

how hard was it to put the cam in? i have a alot of experience with cars and motors (drag racing all my life) you wouldnt have to pull the motor right? just radiator and such front end parts for clearance? take a look at my vids and let me know if u think its worth doing? if u have all the parts how many days would it take a good weekend if u take ur time?

[6Stang99]

@stang1066 It was pretty easy. No, we did not pull the motor. And it can easily be done in a weekend.

[snoop6604]

@stang1066 youve been drag racing your whole life but never put a cam in a car? haha how did you manage not too.

[NickBrinson2650]

how much did it cost for the gt bumper and the price of paint

[stevelubs]

@NickBrinson2650 lmfaoooo

[NickBrinson2650]

@stevelubs I dont see Anything Funny



[6Stang99]

@NickBrinson2650 I think around $300 or so total.

[datonev6mustang]

what are the cam specs?

[dboyinaz]

how much did the cam install cost



[6Stang99]

@dboyinaz Probably spent around $700 for all of the parts, fluids, gaskets, etc, and did the install myself with help from some friends.

[Jzeman11]

sounds mean dude, nice job

[6Stang99]

@Jzeman11 Thanks!

[The00Mustang]

dude this car is clean! im ordering some lt headers and screamin demon coil pack for my car on thursday, and nxt payday ima look into camming it and this car is the example of what i want mine to sound like! NICE car bro

[6Stang99]

@The00Mustang Thanks man! I appreciate the kind words. I still miss having this car...But if you don't mind me giving some advice, I'd say don't waste your money on the Screamin Demon Coil Pack. I had it for 2 years and it crapped out on me. And I have heard of several others saying the same thing. My advice would be to stick with an OEM coil pack. They work just fine. Use that money for a better mod.

[The00Mustang]

@6Stang99 ya no prob, really? alright thnx bro, $100 saved right there haha.. u have a diif mustang now?

[bigmackburger]

There is no way this is a v6! Well, the title says it is but it sounds fantastic!! Absolutely amazing sound from a v6, sounds like a v8 for sure. I would love to make my new v6 premium sound like this.

[210hpmustang]

where didyou get the 3.8 emblem???

[MaxHudson]

How much power did you gain from camming it, my car has the same work done to it basicly.

[monstergreen23]

ayye man did the cam hurt your gas miles ??? i want to put one in my mustang but i dont wont it to drop way down and be the same as a v8 on fuel .

by the way this is one of the nicest mustangs iv seen by far!!! love it !!

[6Stang99]

@monstergreen23 It didn't help that's for sure. I can't really tell how much it was the cam's fault though since I drove this car like I had a lead foot. And thanks for the compliments!

[mrrosales94]

where do you get the 3.8 badge

[ReginaldBuchanwald]

Nice. Did you have to get it tuned? I have an SCT flash tuner and I am wondering if I cammed mine if I would have to go to a dyno shop. If yes, how did it run before the tune?

[turbonegro1120]

@ReginaldBuchanwald its always better to goto a dyno with an aftermarket cam

[ChrisJohnson2014]

I have a question. When you had duel exhaust how was the fitment. And did anything rattle at all. I went to two exhaust shops i have in my town and I only have two exhaust shops. And they both said I cant have duel on my car cause it will rattle cause It will be hitting the shocks or springs or what ever. Please respond. I love the way my car sounds now and I would like to keep that sound but I want two big chrome pipes.

[6Stang99]

@ChrisJohnson2014 No nothing rattled or hit anything. Pipes fit fine. Just like a GT with dual pipes.

[onemichaelmarsee]

@ChrisJohnson2014 those shops are retarded

[RSNitsua]

very cool, I love that color on the SN-95s and that sound is awesome, you wouldn't think it was v6 if you didn't know.

[mandoc559]

do you know if a 5.0 h pipe will fit a 2000 v6 mustang?

[6Stang99]

@mandoc559 Not sure, but maybe with some modification it could. Best bet is to stick with one made for your car.

[ReginaldBuchanwald]

Sounds awesome... tasteful too, not like some of the "angry bumble bee" 3.8s you hear. Did you remove the cats?

[6Stang99]

@ReginaldBuchanwald Yes. The cats were removed with the 2nd setup.

[Elquiesceace]

if you have high miles on the engine (120k+) will the new cam fuck with your shit?

[6Stang99]

@Elquiesceace It'll be fine, but I would use the cam install as a good excuse to replace worn out parts while you have the engine apart. I had 105K+ miles when I did it to this Stang.

[turbonegro1120]

@Elquiesceace No way, youll be fine.

[Elquiesceace]

is it hard to put the new cam in? the v6's only have one right?

[6Stang99]

@Elquiesceace No it isn't hard. Just make sure you have everything you need before you start. And yes, the 3.8's only have one cam.

[gwoodieg]

Can you give me a link to the exact cam you used?

[Wafflebrah21]

When you get bigger cams, would you find it necessary to get portwork done to the cylinders to really get as much power from it as possible?

[6Stang99]

@Wafflebrah21 If you have the money than it would definately help to get some port work done to the heads and intakes. Plus than you could get it all done while taking the motor apart only once. If not, than it doesn't matter. You'll still see a good difference.

[Wafflebrah21]

@6Stang99 Okay cool. Was thinking about putting in some bigger cams when I get the chance in my 4.3 chevy, get some more ponies out of it. =] Thanks!

[6Stang99]

@Wafflebrah21 No problem man. Good luck!

[popslinger7171]

that my friend is sex. whats the cam specs?

[6Stang99]

@popslinger7171 Thanks! 218/226 - .50/.50 - 112

[creamyfilling102]

i'm glad minnesota doesn't have this emission testing bullshit...yet. we'll see how democratic governer mark dayton does.

[ttstang43]

@creamyfilling102 democrati fmfl

[elvisam86]

did you cam it and what cam?

[ladymistik]

How could I make my mustang louder I already have flow master

[6Stang99]

@ladymistik Try an off road mid pipe. (No cats)

[xconeticx]

@6Stang99 Would it pass inspection?

[brad2130]

man thiz is one slick mustang. i love the way this thing growls when it idles mind of similar to the ole 5.0 . i have a 2001 mustang on my page. im wanting some mods. what all did you get?

[mandrgalvan]

This is how a v6 should sound out of the box :)

[6Stang99]

@mandrgalvan lol

[xElxxNinox]

@6stang99

can that thing actually pass emissions with all that? or did you have to do other mods to make it pass?

[6Stang99]

@xElxxNinox With the right tune t could have passed emissions...but this car never did. Part of the reason I got rid of it.

[Blownpony01]

your car looks similar to mine, v6 pwr

[ALLOY07MUSTANG]

were did you find the cams  and will they fit a 2000

[UptownCarwashBoy]

man ur stang sounds like a v8 nice job i like the svt rims and cobra hood

[6Stang99]

@UptownCarwashBoy Thanks. That's just the stock hood though.

[Blownpony01]

haha you should have sold me your lt's and cams

[Blownpony01]

so ridiculously sexy, i wish mine was cammed

[6Stang99]

@Blownpony01 Thanks man. I do miss having this car.

[Blownpony01]

@6Stang99 mines about to be boosted:) and it looks similar to your except i have the blackout deck panel and in between the exhaust tips where the cutout is is black to looks soo sick but imma slam it and boosted it the get a paintjob and its gonna be sicknasty, ill post up a couple moar vids

[ChrisJohnson2014]

@6Stang99 wait you dont have this car anymore

[6Stang99]

@ChrisJohnson2014 Nope, havent had it for a few months now. I sold it and got the white supercharged Fox in my other videos if you look at my page.

[ChrisJohnson2014]

@ChrisJohnson2014 man that would be tough for me cause i love the body style of my car but thats my other all time favorite is the old 89 5.0's

[minicobra01]

hey just wondering but can u make another vid with revs and a regular accel and then a WOT??? just wondering also stock heads or did u get the stage 3 power pack from supersix?

[6Stang99]

@minicobra01 Sorry, but I don't have this car anymore. Parted it out and bought a Foxbody. You can hear some revs and WOT in the dyno video I have posted though. Just look through my videos. And no I didn't have the Stage 3 pak. Windstar upper intake, SSM p&p lower intake, SSM "lumpy" cam, and stock heads.

[minicobra01]

@6Stang99 just realized you were on MM too lol i fail, im assuming you are the name looks familar

[6Stang99]

@minicobra01 Yea I'm on MM.com.

[supermanXindisguise]

hey where did u buy ur cam at?

[6Stang99]

@supermanXindisguise From Tom at Super Six Motorsports.

[2002MustangV6]

hey man that sounds sick dude wat cam did u buy and im also in the process of trying to get long tube headers too

[calviazteca]

iknow so much about mustangs and this doesnt sound good to me im sorry but sounds like popcorn on the microwave

[MrANTMAN010]

i like how it sounds i need some performance tips

[JARON16]

Hey man bout how much did it cost to get ur car cammed it sounds great btw

[quiqueh1988]

Sounds sick man..very nice.. im planning on puting some cams on my V6 with in the next few months also so im looking around..what are your cam specs?? yours sound like what im looking for

[6Stang99]

@quiqueh1988 218/226 - .50/.50 - 108*

[quiqueh1988]

@6Stang99 Thanks for the help!

[dieselpower7789]

Sounds like a V8!

[dejuan71]

Why'd you take the other clips down i was telling my buddies how much power you gained with your bolt ons compared to our v6 cars now they dont believe me lol

[6Stang99]

@dejuan71 HaHa. Sorry. I'll put the dyno one back up right now. My bad. lol

[MrProficial914]

Where did you get that 3.8 badge? And how did you go about putting it on?

[drc1981]

I like your Mac setup much better; same setup I'm going for soon; What are the specs on that cam sir?

[6Stang99]

@drc1981 Yea I like it much better now too. It sure is loud without the cats on there.

[iamtheultimate]

Hey, I have same model sixxer myself. I'm sure you've been asked many a times, but what cam you got in there? I have some money in the wallet and it's itchin' to get out. I'm not a master at this stuff, but your setup seems most promising. Mind filling me in on the details? And what else is really needed with it? Total cost? Out of curiousity. Thanks in advance bud.

[6Stang99]

@iamtheultimate It's a custom grind cam from Tom at SuperSixMotorsports. To do the cam install you need the cam, a new set of springs and retainers, all new gaskets for when putting the engine back together, as well as new engine fluids. All in all I think the install cost $900+ since we did the install ourselves.

[iamtheultimate]

@6Stang99 Thanks bud, Was it worth the install? Versus like a single turbo or if it's a find a cheap supercharger? Did you get alot of power from it?

[6Stang99]

@iamtheultimate I think so yes. Because right now I'm looking to run N/A for a while. And yes, it gained some good power.

[mell00ut5]

wow best sounding v6 i have ever heard. i'm glad you're rocking the 3.8 badge out back. very respectable.

[6Stang99]

@mell00ut5 Thanks man. I put that there because you wouldn't believe how many people can't tell it's a v6 up close and in person. Even with the badge on people stilI say, "Is that really a V6?" lol

[braddaloco1]

dude...this sounds just badass man....minus your H pipe this is how my exhaust will be setup just needs lt headers...but either way dude..badass .....

[WhatAmIDoingRight]

Looks sexy without the wing... it's such hard choice to make... do I want to keep it on or take it off. :S

[6Stang99]

@WhatAmIDoingRight I love how it looks without the wing. No question here, it's staying off. hehe

[WhatAmIDoingRight]

@6Stang99 Yeah I'm kinda using yours as a model for how I want mine to look. I will post up a video of it when I get the chance. It's nothing like yours right now, but it's a work in progress. And what do you think about blacking out the tail lights? It's white with black lettering on the back bumper. So I think it would go along with the coloring good.

[6Stang99]

@WhatAmIDoingRight Blacked out tail lights would look great on a white car. Do the rear reflectors on the side of the rear bumper as well and it would look real good.

[dejuan71]

I woulda kept the x personally ive always been a x kinda guy. Cant wait to hear it on the street though.

[6Stang99]

@dejuan71 You can hear the car at higher RPM's in the dyno video I also posted.

[dejuan71]

sounds great man that cam is really coming alive now. best v6 mustang ive heard.

[6Stang99]

Thank you.

[jamg6689]

Sick