I was hoping to see how it all worked and any calibration if any was needed to make the system run or is it as simple as plugging the batteries in, switching it on,pulling the trigger and off it goes?
@traxxas5308 well...it depends what you want to do. I mean I would rather have the one motor instead of two...but that said..it depends what you want to do.
You can use a series connection without having to use that adaptor. you can solder anougher bit of wire on to the positive part of one connector then to the negative on the other. I did the same with my E revo mmm and my emaxx mmm and my hyper st conversion also using a mmm.
@bigmikie well actually I don't think there is a "set" order, I just put them in and it worked, some people say it goes backwards lol and they just switch it, I am sure its on castles site but there was nothing in the manual
@blabloomoo I haden't really thought of it...I like to keep the stock stuff in case I ever want to sell it, that said I don't think I will be selling this baby anytime soon, you could always PM me.
@rcmaniac27 thanks a lot for the kind words, sadly I do not own a firestorm so I wont be able to show this, I suppose if we get one however I would for sure...now going to check them out :)
@Danboarding glad to hear, yea it was originally like 30 mins long, took forever to cut down but I think everything we needed is in there, and there are a few little obstacles that are helpful to see ahead of time.
@scubasteve728 yea...I would start with some lipos then...the monster stuff is a couple hundred bucks, and you will still need batteries...start there and have fun for now.
@scubasteve728 ha yea lol, I have been holding off on applying until I get 1500 or so subs and 3K views a day, hoepfully that will happen by the end of april...then I will apply..
You dont need Zip Ties, just get the ESC mount it fits perfectly to the chassis....
TitoFrm509 3 days ago
I was hoping to see how it all worked and any calibration if any was needed to make the system run or is it as simple as plugging the batteries in, switching it on,pulling the trigger and off it goes?
tillsy23 5 days ago
Is it worth to put in the summit brushless motor? Is the motor brushless differential damage or other parts?
zuleks123 1 week ago
for appearance reasons could you guys of found a way to actually screw/bolt the esc to the chassis?
shalling84 2 weeks ago
you should do more videos like this
graeme127 3 weeks ago
200$ esc with zip ties?
jason1786 1 month ago 3
@jason1786 i agree there's is another way to mount it all im sure
shalling84 2 weeks ago
@shalling84 i hope.
jason1786 2 weeks ago
can you list all the extra parts that you need, for example: like screws and a drill.. all with sizes aswell please. thanks
tdclf 2 months ago
can i run stock gearing if i upgrade to the MMM combo in the summit ?
exaturbo 2 months ago
twss twss twss twss.............
fraserfastproduction 2 months ago
the summit chassis is set up just like the erevos
TheDrewby22 2 months ago
after u do that is it done and ready to ride and what is top speed
jasonrywal 3 months ago
Hello, If you run a 6500 2 Cell Lipo pack, can you run it till the wheels cant turn anymore or will it burn out your ESC or something ?
kiddrockkyoya2001 3 months ago
This has been flagged as spam show
Who are you are you beardey or nerd
latestrc 3 months ago
next time man you got to move the mic your using you are making it distort but good vid man
jason28w 3 months ago
This has been flagged as spam show
v twin is the way to go check out my channel and check out my e-revo thank's
jason28w 3 months ago
wtf dude u sound like a n00b!!!! js
blackhawkpros 3 months ago
can you also crawl with the mamba motor ?
5594predator 4 months ago
where can u get a y adapter?
ontogc 4 months ago
who doing this vid???
TheRclightning 5 months ago
How much does the new motor and ESC cost? And also is it still waterproof?
Pyromaniac2450 6 months ago
do u need to zip-tie the fan to the motor?
TheFluffyVanquisher 6 months ago
was it difficult to get the cogwheel out of of the stock motor?
TheFluffyVanquisher 6 months ago
Hi do you need a different gear for motor or can you use stock? also is the system good for rock crawling and speed?
xjs2 7 months ago
Exactly, I'm curious about what gearing
kyrkbymannen 9 months ago
Wat gearing did you use ?
escalerajr 9 months ago
does the mamba monster come with the screws for mounting the motor?
foxracer858crn 9 months ago
What kinda Allen wrench set is that and where did u get it
kalishaROX 10 months ago
Does the fan come with the motor?
nickelback550 10 months ago 3
@nickelback550 yea
rcnightmare 10 months ago
Hey rcnightmare,
what will happen if i put a single vxl system in this? would it be too much for the engine? Would it fit in the stock motor plate mount? Thank you.
SCHMULBACH22 10 months ago
Is the fan on the motor waterproof too?
nickelback550 10 months ago
@nickelback550 no
rcnightmare 10 months ago
What's better the mamba or dual velineon motors. Just curious. I must say the mamba is awsome ( I have one in my revo )
traxxas5308 11 months ago 2
@traxxas5308 well...it depends what you want to do. I mean I would rather have the one motor instead of two...but that said..it depends what you want to do.
rcnightmare 11 months ago 2
@traxxas5308 id go with the dual velineon just for the waterproof factor.
u2bwachr 2 months ago
@u2bwachr all it is is a rubber seal not waterproff water resistant
wolf2hawk 1 week ago
You can use a series connection without having to use that adaptor. you can solder anougher bit of wire on to the positive part of one connector then to the negative on the other. I did the same with my E revo mmm and my emaxx mmm and my hyper st conversion also using a mmm.
Alexsupervee 11 months ago
@Alexsupervee yea for sure, even better :)
rcnightmare 11 months ago
Why not just solder two deans plugs on by using a jumper wire ?
Alexsupervee 11 months ago
@Alexsupervee I am not sure what you mean? If you want to combine voltage its gotta be series..
rcnightmare 11 months ago
Why not use the stock mounting bracket for E-Revo?
2leafsrule 1 year ago
@2leafsrule because this is free :)
rcnightmare 11 months ago
could you tell me how the wires plug into the esc from the motor. Like the black red and white to the esc terminals
bigmikie 1 year ago
@bigmikie well actually I don't think there is a "set" order, I just put them in and it worked, some people say it goes backwards lol and they just switch it, I am sure its on castles site but there was nothing in the manual
rcnightmare 1 year ago
@rcnightmare THANKS I GOT IT MAN THE SUMMIT RIPS WITH THAT SYSTEM
bigmikie 1 year ago
is the fan go in channel 3?
hondatmx 1 year ago
@hondatmx yes
rcnightmare 1 year ago
This looks simple to do isn´t it?
TheGTbmxer 1 year ago
@TheGTbmxer It depends who you are, I mean, for van sure...for me...lol not to easy
rcnightmare 1 year ago
thats nice are you selling the stock esc and motorand how much
blabloomoo 1 year ago
@blabloomoo I haden't really thought of it...I like to keep the stock stuff in case I ever want to sell it, that said I don't think I will be selling this baby anytime soon, you could always PM me.
rcnightmare 1 year ago
@rcmaniac27 thanks a lot for the kind words, sadly I do not own a firestorm so I wont be able to show this, I suppose if we get one however I would for sure...now going to check them out :)
rcnightmare 1 year ago
intro song?
ThePhiltastic 1 year ago
@ThePhiltastic Its just a clip
rcnightmare 1 year ago
This is sweet! Thanks for the video; I was very interested in how this is done before I upgrade mine!
Danboarding 1 year ago
@Danboarding glad to hear, yea it was originally like 30 mins long, took forever to cut down but I think everything we needed is in there, and there are a few little obstacles that are helpful to see ahead of time.
rcnightmare 1 year ago
Good tutorial! Thumbs up
RCNEWStv 1 year ago
@RCNEWStv thanks a lot man! Eagerly awaiting the next episode of the news...you uploading that as we speak?
rcnightmare 1 year ago
@rcnightmare lol, no not yet. About every two weeks is all I can manage.
RCNEWStv 1 year ago
@RCNEWStv ur lazy :)
rcnightmare 1 year ago
nice dude i used my first mamba system today and im hooked, castle rocks!
beastxmoder 1 year ago
@beastxmoder yea for sure! Mamba or Tekin stuff is boss, it makes the ordinary amazing
rcnightmare 1 year ago
@ZzoldpeopleburningzZ right back at ya
rcnightmare 1 year ago
There you go. I told you that youd go with the mamba monster not the max. :)
TreadRCRacing 1 year ago
@TreadRCRacing yes the monster should be OK
rcnightmare 1 year ago
sweet!, i bet that thing flies
keith179150 1 year ago
@keith179150 had it out today, and oh yea...you are right on that
rcnightmare 1 year ago
i got my max pro today for my b4.1 its nice but i need a senor cable.
idrummerboy13 1 year ago
@idrummerboy13 great man, I have the Max in a B44, and that thing flys
rcnightmare 1 year ago
very nice cool vid great job maybe i will get one for my summit
scubasteve728 1 year ago
@scubasteve728 its about the only thing I would upgrade from the stock kit, and its a game changer
rcnightmare 1 year ago
@rcnightmare yes it is but i still need some batteries for mine the stock ones only give me like 10 minutes of run time
scubasteve728 1 year ago
@scubasteve728 yea...I would start with some lipos then...the monster stuff is a couple hundred bucks, and you will still need batteries...start there and have fun for now.
rcnightmare 1 year ago
@rcnightmare yes thats exactly my plan. i hope you get youtube partner soon so you can start paying for your hobbies
scubasteve728 1 year ago
@scubasteve728 ha yea lol, I have been holding off on applying until I get 1500 or so subs and 3K views a day, hoepfully that will happen by the end of april...then I will apply..
rcnightmare 1 year ago
@rcnightmare i see i hope it happens hah i will do my part lol
scubasteve728 1 year ago