Average rpm idle 750-900 depends on yr model. And you can hear your turbo which means your getn fuel and that means your rpms are higher than 800...the truck is lugged down that's why it ain't turnin 3k rpms.
750 rpm is idle....I've been around vp44 trucks, p7100's and a ton or CR's. Vp44 injector pumps are by far the weakest in output power. Even if you had a HO vp44 800 rpms would stall the truck and kill it a couple feet fast the start line. Truck looks good I'm not knocking it at all.
@Deepinher01 im glad you know my truck so well. who is to say i didnt lower my idle. also did you even look @ the harrison pull? you can hear 3500 rpm the whole way. and 750 is not idle BTW
800 rpms and your full of shit. You wouldve made it 75' or if that. If it turned 800rpms then how did it smoke at the end when the sled stopped...you can't lie on camera!
@Deepinher01 if you owned a VP truck you would know they have the most grunt down low. it smoked in the end because i hit a soft spot and the rpm hit 3500.
on this night the truck was on limp mode. i was running on injectors only. it only turned 800 rpm. it lugged the whole way down. but thats a 24v for ya even luggin they still like the pullin. lol check out the harrison arkansas truck pull. you will see how its suppose to run
U SEE THAT WHEELIE
Jrokr21 3 months ago
Hahaha he went past the end of it
ReptilianReaperOFxbx 3 months ago
He must of switched to electric power wtf with no smoke?
NextGenR0b0t 7 months ago
@NextGenR0b0t read the description. then look at the harrison truck pull.
kawirider003 7 months ago
hey do they do that every year in mt home??? bad ass truck by the way
MrUrielrios10 10 months ago
@MrUrielrios10 yes they do have it every year somtimes two or three times a year. and thank you. check out the other videos.
kawirider003 10 months ago
why was it runnin in limp mode?
Kawasakiforlife7 10 months ago
insane truck man
19packerfan85 1 year ago
very nice pull. great looking truck too.
jt4265 1 year ago
@jt4265 thank you
kawirider003 1 year ago
lol was he taking that thing home with him?
angusandleigh 1 year ago
where did u get the led strip in the grill. also nice looking rig
scootermanic 1 year ago
cummins torque
Dodgeram901 1 year ago
i swaer that truck used to run around berryville id see it at thw highschool
RephrasedHD 1 year ago
@RephrasedHD you did it was me :)
kawirider003 1 year ago
that was a virtually smokeless run. Perfect tuning. unless you like the smoke ;)
Mitch14077 1 year ago
I checked out the Harrison Ark pull video and you pulled about the same distance but more smoke. It cleared up a couple times.
Deepinher01 2 years ago
did u hear the difference. tires speed truck speed?
kawirider003 2 years ago
Average rpm idle 750-900 depends on yr model. And you can hear your turbo which means your getn fuel and that means your rpms are higher than 800...the truck is lugged down that's why it ain't turnin 3k rpms.
Deepinher01 2 years ago
you can hear my turbo cuz its small and there was no filter on the tube.
kawirider003 2 years ago
750 rpm is idle....I've been around vp44 trucks, p7100's and a ton or CR's. Vp44 injector pumps are by far the weakest in output power. Even if you had a HO vp44 800 rpms would stall the truck and kill it a couple feet fast the start line. Truck looks good I'm not knocking it at all.
Deepinher01 2 years ago
@Deepinher01 im glad you know my truck so well. who is to say i didnt lower my idle. also did you even look @ the harrison pull? you can hear 3500 rpm the whole way. and 750 is not idle BTW
kawirider003 2 years ago
800 rpms and your full of shit. You wouldve made it 75' or if that. If it turned 800rpms then how did it smoke at the end when the sled stopped...you can't lie on camera!
Deepinher01 2 years ago
@Deepinher01 if you owned a VP truck you would know they have the most grunt down low. it smoked in the end because i hit a soft spot and the rpm hit 3500.
kawirider003 2 years ago
it sounds like ur RPMs r around 1500 or so, pullin that much weight at 800 RPMs there isnt enough fuel to keep the engine turning
kevinkrause67 2 years ago
@kevinkrause67 you must not know how a vp is. they are the best when it comes to low end grunt.
kawirider003 1 year ago
one of the best pulls i have seen though, did it as though there was nothing behind u, well done
kevinkrause67 2 years ago
@kevinkrause67 thank you. also check out the harrison arkansas truck pull
kawirider003 1 year ago
Sweet video! Did you do any tuning to make it smoke not as much? Because I know that Cummins smoke alot during sled pulls and such. Thanks!
powerstroke2504X4 2 years ago
on this night the truck was on limp mode. i was running on injectors only. it only turned 800 rpm. it lugged the whole way down. but thats a 24v for ya even luggin they still like the pullin. lol check out the harrison arkansas truck pull. you will see how its suppose to run
kawirider003 2 years ago
oh i see. may i ask.. what is in limp mode? thanks! i'll check it out!
powerstroke2504X4 2 years ago
its when your ECM decides to take a shit on you and say your getting stock HP until you fix me. lol
kawirider003 2 years ago
hahah! alright! man that sucks!
powerstroke2504X4 2 years ago
Dodge 4 life
MPLSTORM 2 years ago
Nice!!
MemberYourBike 2 years ago 2
thank you. be sure to put in ARKLAHOMA to find more.
kawirider003 2 years ago
this was made possible thanks to harrison arkansas diesel performance.
69PackMule 3 years ago 4