mr2 turbo vs mr2 turbo before rev3 conversion

[ilovemytubby]

500bhp + from a ct26 now come on!? we all no the ct20b is the better turbo it holds boost at the higher rev range, and neither ct26 or the ct20b are going to be capable of 500bhp no matter what you do to them.

[mike22runcorn]

Jus had my ct26 rebuilt and is now cabable of 1.8 bar reliably can't wait to get on the road an take down some rev 3's lol

[Phazon559]

They probably put it at the same PSI so they can show the difference between the two turbos. It's not that hard to figure out, everybody who knows something about MR2s will know the CT20b is better but this shows video proof. It helps people out even more.

[SubwayGUY48]

jsut to show?

[psshhtmr2]

Why whould you have both turbos at same psi? The ct26 looses potentional after 14-15 psi. The ct20b should be able to do about 16-18 psi.

[martinincze]

can pull 18PSI easy from a ct26, (rev 2 computer is limited to 18PSI) i got mine high flowed, these are bigger then the ct20b as you probably know, and now that its highflowed its breathing 500+ HP. the 3rd gen runs 2-3PSI higher boost standard then the 2nd gen. 3rd has15Kw more stock. rev 3 180kw to 165kw. If the rev 2 was running 10PSI from the factory like the rev3 it would make this power easy. if both were running same boost at 14-18 rev 2 would make more.

[tazman888]

MR2 3rd GEN Ruled! c",}

Another White Rabbit MR2 =}