If you were to apply the brake during and emergency situation, then, you'd be moving the piston on the brake master NORMAL POSITION, then what? Is it better to have it fail then?... You Hack!
You can save people a lot of grief if they have older cars by including this tip in your video: if you press the brake pedal all the way down to seat the caliper piston, you may allow the rubber seals in the brake master cylinder to run in a rusty section of the cylinder. This causes the seal to wear and leak, resulting in a pedal that sinks upon normal braking. In older cars, only press the brake pedal AS FAR AS IT NORMALLY DOES to reseat the caliper piston. This avoids master cylinder failure.
hellno you gotta be kiddin me dude. ive gone from jacking car to pumpin brakes?? if it were that easy. you can get all ya crap in one video or two not 15! sorry for the rant.
Like mzw said Why can't they number the video steps from 1 to whatever, I mean it is really annoying trying to find them in the correct steps, plus each video is so damn short. so stupid!!
I've never drained the fluid for this... are you supposed to? why would one need to unless he removed the brake line and allowed some to leak out, thus letting air into the system.. if you don't do this, it shouldn't need bleeding.
yes the master cylinder was not checked or topped up. this will cause air to leak into the system causing spongy brakes and eventually failure. these guys dont know it all.
HEY CAN YOU HELP ME OUT WITH SOMETHING IF MY REAR BRAKE LINES PIERCE CAN I WELD THE FITTING AT THE MASTER CYLINDER TO CASNCEL OUT THAT BRAKE plz help me
hey bud suck my d**K if i knew where your house was id drive into it and shit on your couch, by the way im not gonna kill anyone cause its a yard car you fag and id rather have front brakes than no brake so your the one with no mind power yo homo bet your constepated
*yawn*
lamoboy 4 weeks ago
He's a bit ugly but could adjust my piston for me!
I would check out his rim to make sure there were no marks on it.
urbex2007 10 months ago
Good luck with changing your disc brake pads.....fml
racerxgt1 1 year ago
DR fuck face zombie
hp11208 1 year ago
best to bleed the brakes once you have replaced the pads and or shoes, duh!!!! galde iam a real mechanic and do the job right
KevinMillard68 1 year ago
this guy should act in a horror movie rather than explaining automotive stuff
gaj3n 1 year ago
i aint gonna lie....these videos DO help......but i agree DONT MAKE IT SUCH A FUCKIN HASSLE AND DO ONE VIDEO NOT 354384498464 LITTLE ONES
jewISHLoteK 1 year ago
the fuck..
aziv 1 year ago
that guy looks 10 feet tall
AJrobbs 2 years ago
If you were to apply the brake during and emergency situation, then, you'd be moving the piston on the brake master NORMAL POSITION, then what? Is it better to have it fail then?... You Hack!
MrSupertwo 2 years ago
You should depress the brake pedal all the way down, that's the right way to do it.
MrSupertwo 2 years ago
that guy look like a robot
nickjr109 2 years ago
good luck with changing your break pads!!
mmagouh89 2 years ago 3
You can save people a lot of grief if they have older cars by including this tip in your video: if you press the brake pedal all the way down to seat the caliper piston, you may allow the rubber seals in the brake master cylinder to run in a rusty section of the cylinder. This causes the seal to wear and leak, resulting in a pedal that sinks upon normal braking. In older cars, only press the brake pedal AS FAR AS IT NORMALLY DOES to reseat the caliper piston. This avoids master cylinder failure.
sbakar 2 years ago 2
hellno you gotta be kiddin me dude. ive gone from jacking car to pumpin brakes?? if it were that easy. you can get all ya crap in one video or two not 15! sorry for the rant.
TubeUx 2 years ago
You guys fuckin suck!!! put everything in one video!!!!
91DAintegraB20 2 years ago 4
fucking videos without part-by-part clips. it took me quite sometime to look for all related videos...moron!
JulianneLapuz 3 years ago 7
make it in all ONE video smart ass
koorboi 3 years ago 10
Like mzw said Why can't they number the video steps from 1 to whatever, I mean it is really annoying trying to find them in the correct steps, plus each video is so damn short. so stupid!!
khmersolo 3 years ago
it would be better if all the videos would be 1 not 15
thezmaster505 3 years ago 5
jesus..... it took me like half an hour to straighten all these videos out and bookmark them as "01 - Tips on..."
seems like they could've helped us out and did that. expert village blows.
mzw 3 years ago 3
at the end he says good luck, like your on your own now to change the pads yourself. lol
AndyRoddick969 3 years ago
btw, nice smock...
jefftroyer 3 years ago
I've never drained the fluid for this... are you supposed to? why would one need to unless he removed the brake line and allowed some to leak out, thus letting air into the system.. if you don't do this, it shouldn't need bleeding.
jefftroyer 3 years ago
I probably missed a video my car didn't brake now im looking for a new girlfriend "car accident"
alfredojosemarenco 3 years ago
yes the master cylinder was not checked or topped up. this will cause air to leak into the system causing spongy brakes and eventually failure. these guys dont know it all.
quackenbacker 3 years ago
HEY CAN YOU HELP ME OUT WITH SOMETHING IF MY REAR BRAKE LINES PIERCE CAN I WELD THE FITTING AT THE MASTER CYLINDER TO CASNCEL OUT THAT BRAKE plz help me
davison1021 3 years ago
yes you can davison if you want to die or kill someone else! behave....
better still, get a push bike as you haven't the brain power to own and maintain a car.
quackenbacker 3 years ago
hey bud suck my d**K if i knew where your house was id drive into it and shit on your couch, by the way im not gonna kill anyone cause its a yard car you fag and id rather have front brakes than no brake so your the one with no mind power yo homo bet your constepated
davison1021 3 years ago
ON YO COUCH!!!! LOL!
Phylyn51 2 years ago
what???
davison1021 2 years ago
check brake fluid yes cause drained some
jayguy173 3 years ago
yea, thanks for the info. you shouldnt act like such a dead-bead though. i think it would make the video more interesting.
preludeguy22 3 years ago
Lol hes like a zombie... a smart one
mtlh05 4 years ago 5
Wait don't you have to bleed the brakes for any air in the system?????
califboy 4 years ago
So you don't add more brake fluid to the master cyl.?
rabapab23 4 years ago
Oops.. missed a vid :)
rabapab23 4 years ago