I need another fan for air circulation in an industrial aplication and so far I managed to "solve" the problem with a 1800 cfm/hour centrifugal fan but still there's more needed!
I have a car fan propeller that "blows me away" turned by a driller at 2900 rpm , but I would love a big propeller like this one or at least one from a truck(I searched them and there are 650, 680 and 750 mm in diameter).
Can you "guess" what's the CFM for this propeller ?
Im interested in getting one of these for our Band. We want to use one that is large and rustic looking for asthetics but one that also can blow fairly hard, with low noise, and clean running motor so we dont get any screwy sounds in our amps. I hope this is possible because we want to send a smoke machine at our crowd full speed for a wind tunnel effect.
@METALLICA1024 its a huge heavy impeller, plus the application is usually on a oil riig or mine shaft, thats where you need 4 - 6 of them ( I did a few contra-roating 2 stage units for mine shafts)
Wow! This is a monster! Is the motor 2-pole 3600rpm or 4-pole 1800 rpm? With the wind generated blowing back over the motor, no wonder it runs so cool!
This has been flagged as spam show
I WISH I HAD ONE :)
jetman1998 1 month ago
I WISH I HAD ONE :)
jetman1998 1 month ago
Try too sprinkle some grass on the suction side! And videotape it
acnfanmanin 6 months ago
Use it as your kitchen extractor fan and it would suck your things too!
acnfanmanin 6 months ago
What's the diameter of the propeller?
I need another fan for air circulation in an industrial aplication and so far I managed to "solve" the problem with a 1800 cfm/hour centrifugal fan but still there's more needed!
I have a car fan propeller that "blows me away" turned by a driller at 2900 rpm , but I would love a big propeller like this one or at least one from a truck(I searched them and there are 650, 680 and 750 mm in diameter).
Can you "guess" what's the CFM for this propeller ?
thanks!
gabigowriel 6 months ago
Do my eyes not deceive me or is that 2 austin mini wheels in the background ? Just sold 3 of em on ebay and got 90$ for em, same colour as well.
aly369 7 months ago
@aly369 yeh I had a pair of them, too much rust after i got the tires off (water trapped between the tube), so I binned them
Aussie50 7 months ago
ABB Motors-CTY TNHH TM KT HẢI ÂU Tổng đại lý phân phối Motor ABB tại VIỆT NAM
From: aromavin | Jul 12, 2011 | 18 views
Tổng đại lý phân phối Motor và Biến Tần ABB.
Tổng đại lý phân phối Motor Giảm Tốc và Hộp Giảm Tốc GONGJI
Tổng đại lý phân phối Giảm Tốc SANYA
Tổng đại lý phân phối Quạt Thổi Khí GREENCO
aromavin 7 months ago
I want it!
vissenkijken 8 months ago
ill buy that
pumpmaster760 9 months ago
@pumpmaster760 mmm, dunno about them shipping costs :D. it would get expensive real fast.
Aussie50 9 months ago
@Aussie50 i live in washing state U.S. so ya it might be expensive. But that one badass fan!
pumpmaster760 9 months ago
mmmm awesome sound love it.
loud fans are just the best
domokid 10 months ago
Does a fan move more air if it has more blades on it?
smurfboywv 11 months ago
wow one helluva an air conditioning
isethaitchison 1 year ago
Im interested in getting one of these for our Band. We want to use one that is large and rustic looking for asthetics but one that also can blow fairly hard, with low noise, and clean running motor so we dont get any screwy sounds in our amps. I hope this is possible because we want to send a smoke machine at our crowd full speed for a wind tunnel effect.
MastodonDR 1 year ago
why the hell do you need that much power for a fan
METALLICA1024 1 year ago
@METALLICA1024 its a huge heavy impeller, plus the application is usually on a oil riig or mine shaft, thats where you need 4 - 6 of them ( I did a few contra-roating 2 stage units for mine shafts)
Aussie50 1 year ago
@Aussie50 oww thats why its so powerful!
METALLICA1024 1 year ago
1:58 that reminds me of the wind in an airplane
AcaAllertor127 1 year ago
@AcaAllertor127 I need to get around to setting both up together and run them, that would be some serious thrust!
Aussie50 1 year ago
@Aussie50 jet v8 jagnut to come over and add the bad@#$ heater fan triple power!!!
AcaAllertor127 1 year ago
@AcaAllertor127 yeah that is a good fan (the axial one I traded him for somthing), all 3 would work really well!
Aussie50 1 year ago
damn yeah that will kill ya!
METALLICA1024 1 year ago
@METALLICA1024 hell yeah it would do some damage :D
the 100Hp axial fans I worked on for Flakt Woods would do the full 'slice and dice' if you got sucked inot the duct!
Aussie50 1 year ago
@Aussie50 no kidding!!!
METALLICA1024 1 year ago
loud fan!
FanFan61618 2 years ago
Good LORD! I want one of those!!!
DieselPoweredHamster 2 years ago
Wow! This is a monster! Is the motor 2-pole 3600rpm or 4-pole 1800 rpm? With the wind generated blowing back over the motor, no wonder it runs so cool!
NathanH5 2 years ago
its a 4 pole 1425Rpm motor, and as you mention, they need to be ran in an 'Air over" configuration to stay really cool.
Being Australian spec 240V 50hz, our 4 pole motors run slower than US 120V 60Hz motors
Aussie50 2 years ago
Scary !
robinhooodvsyou 2 years ago
cool. mount them both on the back of a cart and see what happens.lamo
V8Jagnut 2 years ago 4
That is some serious fanage!!! lol..good vid.
mattyvt93 2 years ago
My goodness that fan has power very nice.
TheCoolmaster100 2 years ago
wow thats a beast ! love it !
67tr876 2 years ago
holy crap its a jet engine lol
30GB 2 years ago 4
must move alot of air!!! deos it?
animebsd 2 years ago 2