Added: 4 years ago
From: marksnoswell
Views: 308,846
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (211)

Sign In or Sign Up now to post a comment!
  • Nice video but no sound. Would have been nice if it had like someone explaining what this was about and how its important. Theirs no reference at all or anything.

    But it would seem like it displays how the magnetic fields between the inner ring and outer smaller rings interact and gain momentum from the constant flow.

    again some reference would have been nice but kool anyway.

    This video is about a free energy device BTW

  • 1. how is that possible?

    2. why is evreone ranting about this video?

  • If you don't have a creative mind and that you study science to obtain a nice salary and a break car to carry your puppies and your female, you have nothing to do here. Your ignorance is a insult for the human race.

  • @PuppeTwister ahahaha, Now THERE'S a line of encouragement!

  • Over 98% of the world population is unable to understand a simple matrix or the exponential arithmetic function. Understand mean: find out the problem or the fonction without a having a hand on your shoulder to guide your path. After read the dictionnary (if there is no mistake inside your book, or that you couldn't notice it), this is where the real work begin.

  • Deepest Cover-up on Earth - Ancient Electric Evolutionary Subterranean h2o2 Water

    youtube vid it is 4:56 in

  • I'm 12 and what is this?

  • Wow! I learned..........absolutely nothing.

  • I went to see the video of this at Testa Tech. Pretty poor demo of magnets sppinning around a central coil of wire. For a guy who remote controlled spaceships in the 1950s over the world, you would think they would have a more impressive demo. If it even ran on its own looped power but it was just round magnets spinning around a round center, pulsed by little electromagnets. Pathetic.

  • @Texmurphy51 I think the point is that organizations seek to be discreet. Why advertise that there is an organization that seeks to assist any aliens when they come to put a New Galactic Order over all our lives (for the betterment of all, not just the Illuminati and their underlings). HAM radio has long been a province of the hobbyist, and as such would never be considered a candidate for adoption to Searl technology that enables instantaneous communication with our alien overlords. Hail Searl!

  • Why is the ignorant jerk talking ?

    People supposed to guess it all ? waist of time ... hope your eyes will turn like this , jerk

  • Also please read- ANTIGRAVITY: The Dream Made Reality, The story of John Searl, By my teammate John Thomas(1993), that I first read in late December, Early January 1993. Read also THE ANTIGRAVITY HANDBOOK (1985), ETHER TECHNOLOGY(1977), by Rho Sigma (the late Dr. Rolf Schffranke of Huntsville AL), and read SECRETS OF ANTIGRAVITY PROPULSION (2008) by PA LaViolette. I First saw Dr. LaViolette lecture on gravity control electrogravitics and subquantum kinetics in July, 1990 in Colorado Springs.

  • very possible but only thing ide ask it how would u get it going cause when u pushed one it would make the distances uneven

  • What's causing the field lines on the inner hub to cross out of the radial vertical planes on the inside yet remain in plane on the outer. I see absolutely no way the fields produce a net torque on the outer rollers. All this would do is distribute the rollers evenly around the hub with absolutely no rotation. It wouldn't even make a good bearing because the magnetic normal forces would increase the rolling resistance. What is the point of this?

  • Almost right: The poples on plates and runners are NOT straight up and down, they are SKEWED, in the actual SEG, lik HELICAL-cut gears!

  • eso no funcionaria de ninguna manera

  • That is not how it works

  • Nice vid, I think you missed your vocation somehow

    .

  • If ths is a magnet this wouldn't work :))

  • Oooh Zero resistance wire! As a ham radio guy, I could use some. Can I buy a hundred feet?

  • Nice done, compare this with the Searl John effect or solution. Compare where and how the magnets are. Searl John have copper core's so they make by movement extra magnetic fields, thats why the magnet rollers come a little bit off the big wheel. By high rotation not controlled, you have zero-resistance in the copper core, thats why they can go up as an ufo. Lara. Compare please ... so you learn ...

  • who will move the rollers?

  • @MillyVanillification The Zero Point energy Gargoyles.

  • I've gone to 2 DIFFERENT YouTube pages and the commentaries are duplicates of each other, then when I click the arrow in the top l-hand corner to go back 1 page the previous page is skipped -- this has happened SEVERAL times -- WTF!?

  • @primelimelite  hacked

  • this cant work, cuz the force of the Magnetic Field is the on both sides the same....

  • is think it would stop

  • Question: if we have 2 circular magnets kept parallel to each other, does the force of repulsion increase/ decrease when you rotate them?(in same/ anti direction?)

    I need to know the answer, can you help me?

  • This is just a Zylinder-bearing..

  • put a load on it like an aquarium pump , would it run a SMALL load like that?

  • In reality it would´nt work! Your Video shows activities they are illogical! - ??

    Whatever gave you that idea? I would arrange it a little more different!

  • In reality it would´nt work! Your Video shows activities they are illogical! - ??

  • debrainwasher why are we here for? why are we here for? I think you know, we just need to outcome the resources so we can have free eliments, electicity, and metal by growing them, SEG (searl effect genorator) By John Searl he invented the first one in 1946 that produced the "free power" by using the physics of magnets. the problem is Cooling and heating. cuases the magnets to become weaker. and the effect works good> its going to be ONE out of 1000 of the future's power

  • What additional force is presented, which moves these rollers aside? Because (according to 3rd N. Law) "releasing" B force is exactly the same like the "getting" this roller! So, if there is no another forces, the system will be a STATIC. >:-)

  • Inventors of perpetual motion

    have fervent faith and Saint's devotion

    The gods of physics duly smite them

    to be reborn ad infinitum.

  • If we could run our cars using free energy graphics we would solve the world's energy crisis. I heard crushed unicorn testicles in the gas tank work just as well.

  • weird...

  • Check out the wind belt generator I have the video save to my favorites also the infinite battery which runs off of limitless radio/gamma/x/microwave rays.Tesla and Hutchison would tell you.

  • The small ones would influence each others too => too much friction => no momentum... => this is bullshit

  • @RinoXX This device is totally frictionless. there is always an airgap. The outer payer is either copper or aluminium, creating eddy crrents with repulsion to balance the magnetic attraction between ring and roller-sets. We demonstrated that effect before a live audience in Albuquerque New Mexico, July 29th, 2010.We had people come up and try it themselves.

  • @Beamshipcaptain: There is no such thing, like a frictionless device. If it looks like it's frictionless it must be propelled... or it's floating in space.

  • @RinoXX Ever heard of MAGNETIC BEARINGS? Those are frictionless devices. Which is what this SEG is!

  • @Beamshipcaptain And I repeat myself. Everything has friction, even magnetism.

    If you want a magnetic bearing to be frictionless you need a superconductor and a total vacuum, nothing of both was acchieved.

    But mabe I missunderstood the video... but if its a bearing it's not verry reliable on axial tolerances...

  • @RinoXX This has no friction, and the magnetic bearing effect of the outer paramagnetic layer of the SEG was shown LIVE at TeslaTech2010 in Albuquerque NM, and I was there, working with Professor Searl and Fernando Morris. Look at the demonstrations showing the frictionless SEG eddy current effect on line. And when the SEG is overloaded, it is superconducting, in a vacuum, and the Earth RELEPS it with great force, it having lost all inertial mass.

  • @Beamshipcaptain How is this thing overloaded? With the help of high rounds per minute? I can't imagine how this should be energised by the earth?

  • @RinoXX The more load you put on the SEG, the faster it runs, the colder it gets, and the more it outputs. One of the first small units destroyed Prof Searl's first landlady's house.

  • @ greenlivingitup . com it shows how to build a free energy device with magnets

  • @DieTheDeath no it doesnt. it just shows it cost 200pounds to show you. this is no ( free (energy device)) :D

  • So why are the rotating parts supposed to move? Have I missed something?

  • Force is perpendicular to field. It won't move.

  • m3141592, it doesn't matter. The hope and belief is the goal.

    ;-))

  • Cool vid

    Cheers!

  • hey ya dumbass....im FSCK as drunk and i can tell you that youll spend less eficiency on the shit if the outside magnets are static and its the inside ring that impells around them,...

  • so cool what could go wrong

  • Ok, here's what you do: attach this device at the base of your creature's brainstem, just above where you'll see the top of the spinal cord. Then replace the rest of the brain pieces, and glue on the skull. I recommend using iron, it resists bullets and clubbing much better than real bone. Then sew (or staple) the scalp shut. Now you are ready to attach the electrodes and charge him up. But I recommend using a smaller device than this one unless you want to make a really big monster.

  • Thanks. Looks like I'll need a bigger device.

  • look up professor John Roy Robert Searl on google video and see this type of engine used to power anything you need power for.

  • yeah yeah...build a working one and power my house for fuck all....dare ya.!

  • Did you ever notice that these things only work in videos, not in a lab. They need more investors to build a working model, then when its milked for a while the Big Bad Oil company or MIB come in and steal the thing and all of the plans.

  • Texmurphy51, I agree completly. The more greedy and gullible investors the perpetua mobile industry can gain, the more funny failed replication attempts can be watched on YT. So we should encourage people to donate their salery checks to people like Mills, McCarthy, the self-titled Prof. Dr. Dr. SEG John R. R. Searl and many others.

    (\_/)

    +_-

  • @debrainwasher Steorn is king of the cons now. Lots of high tech stuff, good line of BS. I like Marko Rodin who has the coil that bends space/time in its center. If you go to his website & check the Endorsements they are all phony. Plus he takes donations from credit cards. If you had a working free energy device would you sell kits or licenses to build them, or build & sell them?

  • Texmurphy51, there are dozens of other in the rip-off scam perpetuum mobile business. This will become the golden future of our whole western civilisation, when the ongoing deindustrialization process (keyword MADE IN CHAINA) will have been completed and education will have vanished. Marko Rodin's coil that should bend spacetime? Yes of course, in people's fantasy such things are feasable, because Rodin's physics is based on numerology, the science of the medieval dark ages.

    (\_/)

    o_=

  • @debrainwasher Yes, unfortuately this has led our Government to bank on developing some Magical unknown source of power that will replace Oil in 10 years. If you look at Wind, Solar, they have problems. Nothing is said about how much polution they create during manufacture, or the energy payback time. I see short term the only alternative is Nuclear, preferably the Thorium reaction. Fusion is still in the future.

  • Texmurphy51, no matters what renewable or alternative energy sources we have (there aren't technical problems with these) political and economical constrainsts or so rigid, no power on this planet (not even God) can flip from oil to these sources. Hence, humanity will perish in a couple of centuries, when we will have turned our atmosphere into a venusian like and depleted all resources. Whenever reason goes against greed, greed will win. That's the harsh fate of humanity V1.0.

    (\_/)

    $_$

  • @debrainwasher Your right about cost, if wind/solar, whatever was cheaper than oil, countries would be using it. Countries in the EU have been installing wind for years dispite its cost. Once they hit about 30% capacity is when the troubles started. China is energy hungry & since the Gov owns everything they would use anything other than oil if they could. Our country would be 90% nuclear except for the envior groups. 3 mile island stopped it all.

  • YUP. or i sould take all the money and fix everything up? or just NUKE THE WORLD. whos with me? millions? billions? or wish 2012 will come around <SCAM

  • @Ticezy Nuclear is already out there to make bombs so to use it for power would be no big deal. The Throium reaction is a safe form of nuclear & cant be used for bombs.

  • Ticezy, to nuke the world would be an excellent solution. This way, the planet belonged to cocroaches for the next millions of years again (these animals are immune to radioactivity), fossile fuels can regenerate and humanity V2.0 can evolve and restart the depletion of earth's resources once more. Maybe humanity V3.0 or 4.0 will grasp, destruction of our homeworld is a very, very bad idea.

    (\_/)

    ^_^

  • you all are stupid>>??? its called SEG. Searl effect generator. its works in labs since 1950's

  • @Ticezy So your telling me a Known source of Free Energy, Laboratory Proven is sitting around not being used while we argue over running out of power. Do you have a working device of your own or are you just reading people who claim to have one?

  • Ticezy, you must be very knowledgabe. We all on YT are terribly keen to see one these magical SEGs with our own eyes. Would you like to tell us one of these labs you mentioned, in that we cen see it?

    (\_/)

    ^_~

  • @Texmurphy51 THey work in Person! I saw in person at TeslaTech2010 in New Mexico!

  • @Beamshipcaptain

    I saw David Copperfield appear on top of an empty table, that you could see underneath, riding a Harley Davidison.

    Does that mean it was real or could it be there was a little illusion there?

  • @Texmurphy51 Say WHAT???

  • @Texmurphy51 You misunderstand. I work with professor Searl. I am chieg IGV engineer for Seallowcommand, and head of R & D at Searl Aerospace, Inc. Incorporated in the great State of Nevada. I was the one who built the nine-foot IGV for Teslatech2010 last summer in New Mexico. The entire audience got to get up and play with the SEGs and demonstrator units at the main lecture and workshop. Videos on YouTube of that!

  • @Beamshipcaptain Ok so your telling me you can prove free energy?

    Why not build a small device, bring it to a neutral setting checked for hidding power supplies. Set up you device, invite media, scientists, & let it run for a Month. Show it can output power to say a 100w lightbulb, with no input power for a month.

    If you could actually demonstrate "Free Energy" you would have investors killing each other to get a piece of it.

    Does Searl wear that garb & hat all the time?

  • @Texmurphy51 Free energy is all around the web, all around youtube. Build some devices yourself, are you afraid of success?

    I am Chief IGV engineer for Swallowcommand, and Head of R & D for Searl Aerospace, Inc. Free energy and artificial gravity is my business. I was the one who built that 3-meter IGV model for TESLATECH2010, in Albuquerque, New Mexico.

  • @Texmurphy51 Investors are coming on line for Searl Magnetics,Inc. which just opened up offices and factory in California, for mass-production of the domestic SEG free energy converter. First SEGs were built in 1946.

  • @Beamshipcaptain So your saying that devices have been out there generating free energy since 1946. A factory to manufacture devices that will generate Free Energy is being build to sell these products. Yet all the Governments of the world are looking for another energy source & have no idea this is going on.

    Well the WORLD is SAVED. I will be able to go out & buy this for my house & get off the electric grid. Oil & Coal usage will stop.

    Come ON do you expect me to believe that?

  • @Texmurphy51 Why not? This technology was perfected in the Early 1950s, and ALL GOVERNMENTS are aware of it, and aware they are NOT "UFO"s.

  • @Beamshipcaptain Well then if its that easy why isnt it being manufactured?

    Who is stopping it if the plans are available on the internet?

    Why dont you build one and run your house and car?

    What or who is holding this back?

    I think you will find what holds this back is IT DOES NOT WORK.

    All you have to do is build a working model & display it to the media.

    Its as simple as that. A test under controlled conditions to prove the device & you will be rich beyond belief.

  • @Texmurphy51 IT IS BEING MANUFACTURED. My Teammate, Fernando Morris, and Professor John Searl have opened up Searl Magnetics Inc., offices, labs, and mass-manufacturing facilities in Southern California, the home of electric-car maker TESLA motors!

  • @Texmurphy51 It works so well it cannot be shut down!

  • @Texmurphy51 See it work right on YOUTUBE, ald LIVE from TeslaTech2010, 2 months ago in Albuquerque, New Mexico. Team Searl and Professor Searl was there! I was there!

  • @Texmurphy51 The governments ALL KNOW about the Searl IGV craft, and that they are NOT UFOs. But they won't tell the people, and go thru all sorts of pretense. What do you think NASA is? Open your eyes to the TRUTH of what is really going on. Fret not, Searl Magnetics, Inc. just opened for business in Southern California this September, 2010. Searl Aerospace Inc., of which I am a part, (Chief of R & D) incorporated in the state of Nevada last May 2010. We did a great conference in July, USA.

  • @Beamshipcaptain The early Searl flying disk photos are obvous models in flight. No witnesses, models lost. If it works point to a film, some witnesses. Not a video of some magnets spinning in a circle.

    So you say I can buy a Searl generator to power my house for FREE ?

    Send me one & I will sign a contract to pay you all the money I presently pay for electricity & heating fuel. Buy an electric car & charge it, also pay you for that.

    Once the generator is payed off I will pay 1/2 for rent.

  • @Texmurphy51 Yes the are moels in flight, and THOUSANDS of witnesses. WEEKLY BBC programmes on the Technology. Warminster became the UFO capital of Europe in the 1960s and 70 s because of the Searl Team SNSRC Team work with the Levity Discs, controlled on 12 Meter band HAM high-powered radio. Graound stations all over the world to turn them in flight. No limit to the speed, no inertia no G-force, NO sonic Boom.

  • @Beamshipcaptain Where in the world are you getting this information?? Your telling me that THOUSANDS witnessed the flight of flying Searl disks. They flew worldwide controled by the 12meter band & yet we do not use the technology.

    Show me newspaper, film, witnesses, proof of any kind that this occured,

    My reference to models was that the 10 foot unit was not in the picture flying but what looked like 1 foot disk on a wire. How did he radio control,an unseen object worldwide? kinda tough

  • @Texmurphy51 Yes, thoousands witnessed the WEEKLY BBC Programmes on the Searl Team's flying discs, self-powered by the SEG. Warminster became the UFO capital of Europe. 10- foot 4.5 ton P-11 model flight tested at Edwards AFB in 1977.

  • @Beamshipcaptain No I want YOU to show me some evidence. Film, statements other than a few photos. First of all the 12 meter band will not reach worldwide. How could he fly them when they were out of view? You cant control something unseen & there was no video technology at the time.

    This is an obvious Hoax. The photos that exists are of small models on strings in flight.

    If your so close to this build one & publicly demonstrate it.

    Why would Searl keep this hidden & only sell books?

  • @Texmurphy51 There were ground stations all over the world to fly the discs. This work was featured in 1968 in LIFE magazine, USA, and there were WEEKLY prorrammes on the work on BBC from 1968-72, and a 10-foot, 4.5 ton P-11 was tested at Edwards air base in California in 1977, DR. Arthur Cain of NASA was on Team and there are photos showing him working on the Demo-1 21-foot craft. Go to Swallowcommand website or Searlsolution website. First SEGs destroyd Prof Searl's first landlady's house.

  • @Beamshipcaptain So because they picked up flying UFOs in 1968 or whenever, I am supposed to believe that these were flown by Searl?

    I can only find videos by Searl or associates that refere to these so called tests of the P-11 in 77.

    Point me to a website, (NOT YOURS) who will confirm these tests of who Arthur Cain is.

    As for those UFOs, that was ME flying them from my house by remote control over the 440Mhz band.

  • @Texmurphy51 You are nucking futz. 42 VTOL craft built and flown from many HAM ground stations. Covered by he BBC in WWEKLY programmes from 1968-72. There were many P-series craft. THe 40 footers were stored in Archangel Russia, for safety's sake as there was no place to house them in Britain. Some were left up in space for years to test the effect of space environment on certain body-shell materials.

  • @Beamshipcaptain Ok so now you say that there were, "many HAM stations involved" Well I am a Radio Amateur so how about giving me the call signs of these stations so I can contact the operators. If so many were involved there have to still be some alive that can varify your claim.

    Again I am asking you to point me to a specific website,(not your own) who can give me proof. All the searches keep using Searl himself as a reference. Nothing independent, no other withesses.

    Show me Proof.

  • @Texmurphy51 How would I have the call signs? At least one gentleman has comeforward who controlled the Discs. Why is this so hard to believe, when it is documented? Dr. Arthur Cain, of NASA, William T. Sherwood, in Rochester NY, both helped to build the DEMO-1 and other craft, Edwards AFB, Calif. tested a Ezekile plass IGV in 1977, NASA consulted about life support in 1969 because manned units require a life-support system because of the vacuum inside, SEG tested at Sussex Univ.

  • @Beamshipcaptain For the love of Searl please don't give him the call signs. We don't know who might be an Illuminati stooge these days. It might be safe to speculate that with a name like 'Tex' he may be an operative of Big Oil. You played it shrewd though, that was some fast thinking. Hail Searl.

  • @Beamshipcaptain So Ham operators around the world controled this device by no recored of who they were of their calls exist. The name only comes up in YOUR videos, I see no other record on the internet. Same with Sherwood. Same with the IGV device. ONLY ON YOUR VIDEO, no where else on the internet. Point me to an independent source of information to prove what you say. Can you do that??

    Ok I SEE, when the Aliens come to give us the New World Order.

  • @Texmurphy51 NASA. Dr. Arthur Cain of NASA was on the SNSRC and SISRC staff building the Levity Discs (IGVs). NASA is aware of the SEG technology since 196os. US Air Force. A 10-foot, 4.5 ton P-series craft tested at Edwards Air Base in California in 1977. THe vice Air Marshal of England, witnessed the flights. As did sveral millin people on British TV WEEKLY, and eywitnesses in Warminster (They had town meetings about the "Warminster THING", including 2 British police officers.

  • @Beamshipcaptain If I search for Arthur Cain I only get your video mention of him. AGAIN point me to a website that shows He or this test took place. No NASA site or legit New Site mentions anything about this even taking place. Can you show me a News Article, Website, or ANYTHING other than UFO sites that have just repeated this story from Searl?

    If you have nothing than STOP repeating this event. Where is your Proof?

    Sounds like Searl was taking false credit for UFOs seen around the world.

  • @Texmurphy51 , He has no proof, me and Beami go way back.

    Beami's sole reason for being here is to scam you, funnel you up the line to Searl and his criminal associates who will want to sell you a DVD about Searl and a set of books called "the law of the squares" for a few hundred dollars, when you read them you will be none the wiser, A very bright friend of mine (Electronics Engineer power stations) has read them in detail.

    There has NEVER been ANY working prototype EVER.

  • @1BustedMyth I knew he was full of it, I just wanted to see if he was a nut of a scammer. Maybe a combination of both but I guess he should make a better story. The "controled it on Ham Band" story is a dead givaway since they did not have the technology in the 50s to remote control a craft as commonplace that many Hams could use. I hate to see people get scammed by things like this & so called Free Energy devices.

  • @Texmurphy51 , BOTH!!!!

    This little bastard is particularly bad because he passes himself off as unbiast. Scum like this polute the gene pool of honest genuine amateur scientists, experimentors and make a mockery of people who like to ask "what if" of which I myself am one.

  • @1BustedMyth Well I see whats going on. Just like the Bedini motor or Steorn that claim free energy, they sell books or "experimental kits" that make no claim of working but allow your to try it yourself.

  • @Texmurphy51 , My friend you have it in a nutshell !

    Beamshit hates me and just goes away when I turn up, because I won't stank for his money grubbing bullshit, he claims to be an inventor/ experimentor and yet he is acyually a preditor on them.

    I have fiddled with Magnets and lots of other stuff all my life, I am all for people having fun doing science at home and if it leads to something, fantastic!~

    But these people are the scum of the earth, here to take your money and destroy dreams.

  • @1BustedMyth , I have worked as a hobby on many projects and have a network of friends who do the same, almost all of the "Free Energy" books, kits for sale are a fruad some unintensionly but most deliberatly, they pray on the very people they claim to support.

    that said there is always a possibility of that other 1% showing fruit for people who are serious. Solar Panels are working Free Energy, but you stil have to have a large amount of money to buy them, so are they free?

  • @Texmurphy51 They were witnessed, and the witnesses drew what they saw. It was the IGV craft.

  • @Beamshipcaptain , Post the video's of the SEG flights on yt so we can all see them, you know the ones I have been asking you for over 18 months!

    You know, those ones you are yet to make!

    Did you want to borrow some fishing line to hang a model up in your bedroom to film (better ask Mum first).

    By the way, whats your cut on book sales these days?

    How about a little bet on when the VERY FIRST! seg will be operational?, after 20 years I can't keep up with the expected date!

  • @Texmurphy51 hold it, hold it... there are NO call signs. Searl and SPECTRE do not use HAM to communicate with our minions...err.. i mean officers. When Cap says he doesn't have the call signs, he isn't trying to hide anything or conceal the locations of secret bases that utilize spinning magnet powers sources. As you pointed out, they are merely magnets spinning in a circle. There is no way that any kind of secret group is using SEG power sources to rise to post cold war eminence. (whew)

  • @BullShitCaptain - you seem to promote the same lies on just about every video. Folks seem to be asking the same questions I do too, and get the same fact-less responses. The BBC has no record of these alleged flying disks otherwise you'd post them. Curiously no one seems to be able to find them. I searched BBC archives for any story relating to Searl and his disks - no joy there. Each time you tell the stories they seem more implausible. Lucky you're not Pinocchio.

  • @LiamXaoh Funny thing, with a quick and easy search, I and others found them. You are a damned liar, and you know it!

  • @BullShitCaptain funny thing, with a quick and easy search the only references are ones made by you and your fellow liars.

  • @LiamXaoh BBC ARCHIVES- MASTERCLIP: 2 B00227 A1_xxx.

    A cursory Search turned this up. So you have not even looked, except to look to suppress this technology or interest in it! You are a liar. This work is done for YOU!

  • @BullShitCaptain - post it to YouTube if it exists. It doesn't so....

  • @LiamXaoh The witnesses exist. In England.

  • @BullShitCaptain - the video footage doesn't exist & neither do the witnesses. You work on the principle that if a lie is repeated often enough then people will believe it. Judging by the posts here you have failed to impress.

    You & your cronies have spent a considerable amount of effort creating false evidence, lots of lightweight videos, shallow websites, referenced your own works & yet haven't gone to the effort of posting videos that would provide some form of proof.

  • @LiamXaoh The DVD THE JOHN SEARL STRY shows footage of two British policemen who saw the P-6 IGV. Both drew what they saw, and it was the P-6, complete with forcefields. Most of the people that built the SEGs and IGVs, and flew the IGVs around the world are still alive also.

  • @Beamshipcaptain - so you keep saying. I can find several people who will swear the holocaust never happened. I can find people who will swear they were at Woodstock, but weren't. I can find people who will swear they have seen aliens and have been probed by them. A lot of swearing but none of it evidence.

    If the footage really existed of these devices flying you would get it and shut up your many critics. You can't find the footage therefore one has to assume it doesn't exist.

  • @LiamXaoh Back in the 1970s, scientists said "we can't find planets around other stars, so we assume it does not exist". Well now we know of 500 other worlds. Keithshemp is a Britisher, on YouTube, and he remembers the Searl WEEKLY programmes on the Searl work. He is one of MILLIONS. You cannot deny this working technology, first built in 1946. In 1977, a 11-foot, 4.5 ton P-11 was tested in California at Edwards.

  • @BullShitCaptain - you keep recycling the same old eyewitness bullshit. If the videos exists you'd find it and put it up on YouTube - against that sort of proof we'd all have to think twice. But no, you just reword your old lies and expect people to fall for them.

    Back earlier in the last century they had technology to film important events. Yet strangely no one thought to film the flying Searl devices and keep the footage.  How careless of them. A reasonable person would say you're lying.

  • @LiamXaoh We found it, but we don't have the money to get it from the BBC. The Searl flyin devices were filmed routinely with still and video. Film loops of stills are on line that have been strung together and animated, Plenty of Black and white and color stills exist. And you are not a reasonable person, because you lied about the BBC footage. No one trusts you. However, the Searl effect technology exists, and prominet physicists have witnessed the work, much of it done at Sussex University.

  • @BullShitCaptain - you have not found footage from the BBC otherwise you would use it. The cost of the footage would be worth millions in advertising if you could get it. The nominal cost to get footage is about $60 search fee plus about $1200 per minute. You're telling me your project can't afford that? As most YT videos show the key points in less than a minute it sounds once again you are lying about this alleged footage.

    Stick your fake witnesses up you know where and get the footage.

  • @LiamXaoh Film exists of an orange fireball traversing the SOuthern english countryside; that is from a UFO special in the 1970s and 80s. That is a Searl IGV in flight. Tesns of thousands of witnesses also in Warminster. They called it "The Warminster THING". Town meetings were held to duscuss the THING. Numerous newspaper articles exist on the Searl team IGV testing by the Searl National Space Research Consortim. I built a 3 meter Searl IGV, and presented it last summer, 2010, in New Mexico.

  • @LiamXaoh You cannot call yourself a reasonable person.

  • @BullShitCaptain - all my friends say I'm rational and reasonable; plus I don't go around making up stories about UFO sightings being IGVs. So I'm reasonable and not a liar too. All these stories you make up are so transparent. Have you any idea at all what constitutes evidence? No! If you posted footage that was clearly showing Searl's lying, oops, flying device then someone may believe, but since there is no footage (despite all your claims to the contrary - otherwise you would post it).

  • @BullShitCaptain - anyone can make all sorts of claims on the Internet (you are a prime example) but we rational folk demand proof. I read your claims and wonder if you really do think people are that gullible. You must otherwise how could you get funding for a scam? For less than a few hundred dollars I'm sure you could build a small SEG and get it actually doing something which unequivocally demonstrates it does something other than fool idiots. But no - you ramble on and on and on.

  • @LiamXaoh Agree, the Searl effect is a surreal effect. Not a video exist to date that reveals any levitating platforms

    I wonder how many suckers have been punched for a buck by this BS.

  • @tcoleman50 - spend a few hours looking at all the free energy devices and you'll see a few videos offering plans to build such devices. I'm assuming Joe Average sends for the plans and either says "looks too hard" or "I'll do it when I have the time" and he has blown his money. Let's say he builds it and it doesn't work (it can't possibly). Probably won't ask for his money back as he may think "can't have built it right". If I had a thick skin and no scruples I'd sell plans too.

  • @LiamXaoh A reasonable person would say the device is in balance when it stops... and it will. There is no internal force that continues the rotation.

  • @Texmurphy51 Please read ANTIGRAVITY: THE DREAM MADE REALITY, The Story of John Searl (1993) by John Thomas, that I read in January, 1994. Also read SECRETS OF ANTIGRAVITY PROPULSION (2008) by Paul A. LaViolette, PhD. There is a whole chapter devoted to the Searl and Russian incorrect copy SEGs.

  • @Texmurphy51 The entire town of Warminster saw the Warminster "THING", which was the Probe sis, later on th eP-11 and P-12. Two police officers drew what they saw, and it was the Probe six, complete with light-cell rim detail. later, from 1968-72 the Searl teams had WEEKLY programmes. Ground stations all over to controkl the craft. Please visit SWALLOWCOMMAND website and SearlSolution website for more info on this suppresed free energy and gravity control technology.

  • @Texmurphy51 All governmnets and military know about the Searl IGVs and they are Not UFOs.

  • @Texmurphy51 You do'nt know what you are talking about. And you can buy and build magnetic motors and generators for the past few years now. Get on it! Are you afraid of SUCCESS?!

  • @Texmurphy51 It has worked well since the first ones were built at British Rewinds, in the UK in 1946. 42 VTOL flying craft (Levity Discs) IGV craft powered by these Searl Effect Generators were built and flown with 12 meter bad HAM radio since 1954-1978. One 10-foot 4.5 to IGV was flown at Edwards AFB in California in 1977. The craft are inside a vacuum, and have no inertia. Flight Voltage is some 10^12 Volts DC, negatve at the rim, positive at the hub. Current is alwyas never over 1.5 milliAmp

  • @Texmurphy51 They work from 64 years ago to today. You don't know what you're talking about.

  • @Beamshipcaptain Show me proof. Point to a video, News articles, pictures, credible witnesses of this happening. As I said you cannot control a craft through 12meters for one it will not reach worldwide reliably. Second you cant control a craft without some sort of visual feedback. No video means you cant fly it. This story is bogus at face value because it makes no sense.

    Show me the proof.

  • @Texmurphy51 Are plice officers credible enough?

  • @Beamshipcaptain They drew what they saw, and it was the Probe 6, down to the last detail, including the 4 unretractable landing legs. Police are trained to be reliable, because lives depend on their being so.

  • @Texmurphy51 We would be incriminating ourselves to actually show you proof, so we rely on hearsay, innuendo, and rhetorical folderol to substantiate all claims. It'll have to do. I can attest that Searl has been extraordinarily helpful to my organization, SCEPTRE. In fact, the SuperSEG devices that draw power from the liquid magma in our secret base of operations near Java were designed by Searl, as modifications to his revolutionary SEG power generator. Searl is a genius of the 1st Order.

  • @ErnstStvroBlofeld So let me get this straight... You have to keep this a secret because why? you will be arrested? Searl sell videos & books on the subject but to actually show that it works is incriminating?

    Your willing to reveal an assocation with Super Secret organization, on Youtube but cant show me proof of a power generator you say is for sale. Well Hell I guess that makes sense.

    Your perfect for the radio show Coast to Coast AM. Call them up & they will probably book you.

  • @Texmurphy51 Well..... I never claimed it was 'for sale' in the same way one might purchase a bit of old Soviet nuclear hardware. Searl was good enough to help SCEPTRE come to am eminent solution. If an organization chooses to locate a new base of operations in a a volcano near Java, it would be prudent to utilize the magma to power the base. Even after SCEPTRE's forthcoming ascension, I doubt it would be put to market. Someone else might think to use it the same way against SCEPTRE!!

  • @ErnstStvroBlofeld Mr. Blofeld, I believe we have cast enough illumination, so to speak, on the topic of secret HAM radio frequencies. Also, why even mention to deny? Isn't this the kind of behaviour that caused the British Secret Service to take such an interest before? I am sure you least of all would be seeking to create a BOND with any group on terms that are other than cordial. Please refrain from coaching our other operatives. The Captain knows the rules as well as any. Hail Searl!

  • @BeamshipGeneral , I'm sorry did you say "Hail" ? when was the last time we heard that?, oh yea that's right- Hitler !

  • @ErnstStvroBlofeld You are a crazyperson. Get the hell off the internet, and go play in traffic.

  • why it run? that is just static

  • This is professor John Searl's famous SEG. First 14-footer built in 1946.

  • just pretty dam graphics is all - does it work though and where is the instructions no audio on this thing

  • what about if your magnetic field detoriate ?where are you going to restore it with new energy supply ?

  • Blue tubes = magnetic field lines

  • is the blue tubing supposed to simulate the current? i dont get it

  • This is useless. The force "pulling" the rollers around the stator in one direction is going to be equal to the force pulling the other way. Effectively, this is useless and would increase the friction between the rollers and stator, slowing the spin faster.

  • that doesn't make sense... if the force is equal, how is it going to increase the friction?

  • Sorry, the pulling force is equal in both directions.

    On top of that, there would be friction, which acts in the opposite direction to the velocity. This would decrease velocity over time i.e. slow it down.

    I said it would increase friction because friction is proportional to the normal force (the force pushing the roller and stator apart) which in turn is equal to the magnetic force pulling the roller and stator together.

  • the magnets pulling it forward are the same as the magnets pulling it back so it wont go any where

  • genious

  • Comment removed

  • I could see a use for this. A vitrual worm gear drive using more potent angles to generate higher torque with less rpm? Just a thought. Q: is a helical wound toroid going to produce an angled field? Or is this based on a current going in a circle and the field being generated as the current propagates along the wire?

  • why would the B field be helical? less curvature by going the next magnet over? please advise.

  • could it be more online c r a p?

  • You do reallize that Eistein was not 100% white RIGHT ? IT IS AN INTERESTIN NOTE THAT EXTREMELY HIGH IQ'S COME FROM EVERY RACE AND SKIN TONE GROUP !

  • Eistein had IQ about 176.

    I got higher. so what?...

  • And this is supposed to prove....?

  • What is the point of this video?

  • S.E.G. Ripoff i presume.