Sharp 1650 and nice plow...I need to find a sleeve hitch for mine so I can use my plow...one question though...why not run the factory 23" bar tire and rim, it would put less stress on the transmission and have more torque for pulling..
@IHMan1066 not nessecarily... i did a test on this with 23 inchers. i have both. these rims are 12 inches wide bead to bead. and when pulling you want more surface area touching the ground. if u run the stock rims, 26 12 12 tires they dont as much surface area contacting the ground. the 23 inchers are ok. but i have noticed a major difference with these tires as in traction and all of that... thanks for the comment. i do have a wide frame sleeve hitch im willing to get rid of if you want
nahh im not pullin it lol. and alirght i wish they still made super lugs but its alright lol its just used for plowing discing and moving dirt and snow and stones lol
@deerhunter217 id get firestone or carlisle tru power. exactly how i typed it. tru power. they r the best. and if u get a 10.5 in rim. get 26 12 12. if u r pulling the 128. go to midwest super cub.net and get the red 800# spring. that is all you need. also go to your local violin shop and by violin resin. take ur clutch disc and melt the resin on the clutch plate. then your clutch wont slip at all. the spring is around 35 bucks
@deerhunter217 well the rims are 12 inches wide... they r not factory. also the tiresare 26 12 12 tires by carlisle. called super lugs. they do not mmake them anymore. the plant burned down about a year ago.. closest thing to them are firestones
@montecarloss85HO not really since the tactor is kinda old and the plow is on the heavy side i dont want to put the tractor under to much strain also i live on a pretty big hill so no not really
@TractorWorld yeah man. free plow. it is a great plow! i am going to restore the plow and sandblast repaint etc in the next month. ull see a vid of that soon! and thanks. i like this tractor. i need to repaint thetranny cover plate again ( the rotor tiller chipped err up :-(
GREAT JOB I have a 1250 cub and would like to rebuild. I installed a ported hydro. pump and installed all the hydraulics and I wanted to know where did you get the parts to rebuild the hydro?
@446Case i get them rite from any case ih dealer/ cub cadet dealer. and also they sell kits on ebay. my kit came with the orings to rebuild the relief valves. and are you going to rebuild the hydro completely? if so... pm me and ill send u some tips if you want and where i bought the rebuiild kit
@montecarloss85HO I want to rebuild the hydro COMPLETLY. I'm not worried about rebuilding the relief valves because I never use them but I want to rebuild the Hydro Pump and was woundering where you got the parts/rebuild kit. Any help would be great. THANKS
@446Case well if u want pm me and ill send you all the urls and ill tell you the easiest way to do it. tell me how far you are too. if the tranny is yanked etc
@Needmorehorsepower thanks man:-) and these are my pullin tires. it is why they are so big lol. 26 12 12 on 10.5s. usually are only 8.5s originally. this thing seems unstopable for plowing!
@500passwords thanks bud! got your parts. ill pm you and tell you everything... and i was very impressed on how it plowed. got shitty tires on the front so i dont scratch my good ones!
Cub lo boys the 3rd "notch" or "click" is front and rear high beam.............
Theoutdoorsguy1 9 months ago
@Theoutdoorsguy1 oh. thanks for the info and comment
montecarloss85HO 9 months ago
Best-looking 1650 I've seen. One of my all-time favorite Cubs! Nice job and thanks for sharing .
Moondog9322 11 months ago
i also pull super stock with one tractor and the tire that everyone wants is 26 12 12... so it is sort of an opinion i guess....
montecarloss85HO 1 year ago
Sharp 1650 and nice plow...I need to find a sleeve hitch for mine so I can use my plow...one question though...why not run the factory 23" bar tire and rim, it would put less stress on the transmission and have more torque for pulling..
IHMan1066 1 year ago
@IHMan1066 not nessecarily... i did a test on this with 23 inchers. i have both. these rims are 12 inches wide bead to bead. and when pulling you want more surface area touching the ground. if u run the stock rims, 26 12 12 tires they dont as much surface area contacting the ground. the 23 inchers are ok. but i have noticed a major difference with these tires as in traction and all of that... thanks for the comment. i do have a wide frame sleeve hitch im willing to get rid of if you want
montecarloss85HO 1 year ago
Thats a great looking cub! I send u my address for the decal. That is cool that u did the pin strips on the hood!
MrGitrdone41 1 year ago
This has been flagged as spam show
i uploaded a vid of my cub
flynnlandscaping 1 year ago
i have a lt1050 2008 model and it wont come close to yours
CUB CADET POWER!!!!!!
flynnlandscaping 1 year ago
@flynnlandscaping yeahh man! i am not a fan of singles really. but this tractor is nice. has some good power.
montecarloss85HO 1 year ago
@flynnlandscaping Fuck those jap tractors
CUB CADET POWER!!!
flynnlandscaping 1 year ago
what tires are those on the rear??
nice cub man
TheRedneck122 1 year ago
@TheRedneck122 carlisle super lugs on 12 inch rims 26 12 12 tire size
montecarloss85HO 1 year ago
nahh im not pullin it lol. and alirght i wish they still made super lugs but its alright lol its just used for plowing discing and moving dirt and snow and stones lol
deerhunter217 1 year ago
yea i know. it sucks!! i got good year ag's on my 128 and im looking to get a 10.50 rim and im not sure what brand tires..
deerhunter217 1 year ago
@deerhunter217 id get firestone or carlisle tru power. exactly how i typed it. tru power. they r the best. and if u get a 10.5 in rim. get 26 12 12. if u r pulling the 128. go to midwest super cub.net and get the red 800# spring. that is all you need. also go to your local violin shop and by violin resin. take ur clutch disc and melt the resin on the clutch plate. then your clutch wont slip at all. the spring is around 35 bucks
montecarloss85HO 1 year ago
hey wat size tires and what brand are on the rear??
deerhunter217 1 year ago
@deerhunter217 well the rims are 12 inches wide... they r not factory. also the tiresare 26 12 12 tires by carlisle. called super lugs. they do not mmake them anymore. the plant burned down about a year ago.. closest thing to them are firestones
montecarloss85HO 1 year ago
This has been flagged as spam show
i have a 1975 cub cadet 1000 that has a three speed transmission and creeper function i have the mower deck and front-end plow
Pokefan528 1 year ago
i have a 1975 cub cadet 1000 mine has the creeper control setting and gear clutch i have the mower deck and front-end plow
Pokefan528 1 year ago
@Pokefan528 nice. you use it alot?
montecarloss85HO 1 year ago
@montecarloss85HO not really since the tactor is kinda old and the plow is on the heavy side i dont want to put the tractor under to much strain also i live on a pretty big hill so no not really
Pokefan528 1 year ago
@Pokefan528 the tractor will be able to handle the work. u should try to plow with it!
montecarloss85HO 1 year ago
very cool.....love the Cub collection!
1968hambone 1 year ago
on the loboy its low, high then high with tail light
gibsonman5 1 year ago
@gibsonman5 yeah something like that. i thought there was a dimmer in there too. maybe an option?
montecarloss85HO 1 year ago
Great video. You need a barney knob on the steering wheel. They make it a lot easier to drive.
BlohmandBlohmer 1 year ago
@BlohmandBlohmer yeah i hear ya! i do have one on my mowin cub! but havent putone on this one. i plan on to though someday lol
montecarloss85HO 1 year ago
free brinly plow? what? love that tractor too!!!
TractorWorld 1 year ago
@TractorWorld yeah man. free plow. it is a great plow! i am going to restore the plow and sandblast repaint etc in the next month. ull see a vid of that soon! and thanks. i like this tractor. i need to repaint thetranny cover plate again ( the rotor tiller chipped err up :-(
montecarloss85HO 1 year ago
@montecarloss85HO yeah i have the same plow i restord mine
TractorWorld 1 year ago
@TractorWorld yeah ima restore mine too! itll look nice behind it i thhink!
montecarloss85HO 1 year ago
@montecarloss85HO o yeah!
TractorWorld 1 year ago
GREAT JOB I have a 1250 cub and would like to rebuild. I installed a ported hydro. pump and installed all the hydraulics and I wanted to know where did you get the parts to rebuild the hydro?
446Case 1 year ago
@446Case i get them rite from any case ih dealer/ cub cadet dealer. and also they sell kits on ebay. my kit came with the orings to rebuild the relief valves. and are you going to rebuild the hydro completely? if so... pm me and ill send u some tips if you want and where i bought the rebuiild kit
montecarloss85HO 1 year ago
@montecarloss85HO I want to rebuild the hydro COMPLETLY. I'm not worried about rebuilding the relief valves because I never use them but I want to rebuild the Hydro Pump and was woundering where you got the parts/rebuild kit. Any help would be great. THANKS
446Case 1 year ago
@446Case well if u want pm me and ill send you all the urls and ill tell you the easiest way to do it. tell me how far you are too. if the tranny is yanked etc
montecarloss85HO 1 year ago
what are you goin to plant
Ls3guy 1 year ago
@Ls3guy probably tomatoes, corn, grape vines, pumpkins, cucumbers, etc thanks for the comment:-)
montecarloss85HO 1 year ago
wow very cool,never thought these tractors could do stuff like that,i love those ag tires on the back :)
Needmorehorsepower 1 year ago
@Needmorehorsepower thanks man:-) and these are my pullin tires. it is why they are so big lol. 26 12 12 on 10.5s. usually are only 8.5s originally. this thing seems unstopable for plowing!
montecarloss85HO 1 year ago
she was plowing pretty good .
cub looks mean with those ags on the back.
thumbs up from 500
500passwords 1 year ago 2
@500passwords thanks bud! got your parts. ill pm you and tell you everything... and i was very impressed on how it plowed. got shitty tires on the front so i dont scratch my good ones!
montecarloss85HO 1 year ago