Hello there can someone please help. I have an LG 50 in tv. The problem is when I turn the tv on it flashes a white screen and then goes off can someone please help. Thanks...
if it is flashing like this then it is the main input output board thats what fixed this issue or try plugging in a usb jump drive with pictures on it if it doesnt blink and corrects the issue the input is bad i hooked a dvd player and cable and still had issue once i used a usb jump drive it cleared right up most likely just bad input out put board hope this helps if the screen is completely black no flashing with sound is t-conn board
dude i have the same prob with a 47" philips lcdtv but mine looks like its darker flashing and my sound still works did u find a solution cuz i really need help
If i was guessing without seeing video and it really is powering off then back on it is your power board but when searching for one on ebay make sure you use the numbers from your board and look to make sure it is the right one before buying.. It should be part number EAY4175270 double check model of tv too.
There is a T-Conn board in the very top little board that controls light for both inverter boards. Inverter boards are the boards on each side of the tv. those project the light to the tv. If your T-Conn board was bad you would have sound but no picture. Way to test that part is to disconnect the harnesses going to T-Conn board then turn tv on. If you can see the screen light up with sound but still no picture it means the T-Conn board is bad.
The problem with this one was the tv come on fine and would stay on. It would just blink or fade in and out. How i knew it was the main input output board was i could plug in a jump drive in the back and then the tv would quit blinking just putting out a bad signal. Then there is the power board... If the tv is no staying on and it is just turning on and then back off again it is probably just the main power supply may even see a few raised caps on compacitors
I have the same t.v. But it turns on then it turns off and right now is turning off and on it just blinks with no picture..... Is it the same problem?
Update for video, Changed main input/output board to correct this issue. NO problem bought one on ebay $79.00 easy fix... tv picture is very clear. no flashing issue. hope this helps a tv shop would have charged about 650.00 and part would have been about 450.00 for about 30 minutes of easy work..... any one could do this just mae sure it is unplugged take back off remove wireing harness and screws and install new board......
Hello there can someone please help. I have an LG 50 in tv. The problem is when I turn the tv on it flashes a white screen and then goes off can someone please help. Thanks...
AlvizarEmpire 1 month ago
Same problem for my tv
ihavefriendsuckedin 2 months ago
Have the same tv except 42 inch version and the same problem, turned off energy saver and it fix the problem perfectly.
malfurn 2 months ago
if it is flashing like this then it is the main input output board thats what fixed this issue or try plugging in a usb jump drive with pictures on it if it doesnt blink and corrects the issue the input is bad i hooked a dvd player and cable and still had issue once i used a usb jump drive it cleared right up most likely just bad input out put board hope this helps if the screen is completely black no flashing with sound is t-conn board
st7650 6 months ago
dude i have the same prob with a 47" philips lcdtv but mine looks like its darker flashing and my sound still works did u find a solution cuz i really need help
LedZeppelinZR1 6 months ago
If i was guessing without seeing video and it really is powering off then back on it is your power board but when searching for one on ebay make sure you use the numbers from your board and look to make sure it is the right one before buying.. It should be part number EAY4175270 double check model of tv too.
st7650 8 months ago
Not sure if it is powering on and then back off again with no other symptoms it's the power board. Did it start doing this after a big storm.
st7650 8 months ago
There is a T-Conn board in the very top little board that controls light for both inverter boards. Inverter boards are the boards on each side of the tv. those project the light to the tv. If your T-Conn board was bad you would have sound but no picture. Way to test that part is to disconnect the harnesses going to T-Conn board then turn tv on. If you can see the screen light up with sound but still no picture it means the T-Conn board is bad.
st7650 8 months ago
The problem with this one was the tv come on fine and would stay on. It would just blink or fade in and out. How i knew it was the main input output board was i could plug in a jump drive in the back and then the tv would quit blinking just putting out a bad signal. Then there is the power board... If the tv is no staying on and it is just turning on and then back off again it is probably just the main power supply may even see a few raised caps on compacitors
st7650 8 months ago
I have the same t.v. But it turns on then it turns off and right now is turning off and on it just blinks with no picture..... Is it the same problem?
8367babyangel 8 months ago
Update for video, Changed main input/output board to correct this issue. NO problem bought one on ebay $79.00 easy fix... tv picture is very clear. no flashing issue. hope this helps a tv shop would have charged about 650.00 and part would have been about 450.00 for about 30 minutes of easy work..... any one could do this just mae sure it is unplugged take back off remove wireing harness and screws and install new board......
st7650 10 months ago