2003 impala LS with dual flowmasters

[muffinz623]

what series is the flowmaster? thanks

[DNALI]

@muffinz623 I ran the serial number and it comes back as a 60 series.

[BluRxPwn]

i jizzed when the car turned on o.o

but the car itself did too lol (:

i quess it really did get "turned on"

[thedarksun8891]

missed a perfectly good opportunity to hit some pedestrians.....tsk tsk tsk

[sowavvy23]

Why The Hell Would You Even Think About Putting Ford Mustang Rims on A Damn Chevy ?

[DNALI]

@sowavvy23 Well since u asked. These wheels are Bullit style wheels. For those of you who dont know. Bullit style wheels are found on all muscle cars including dodge, ford, and yes even chevys. It just so happens that these bullit style wheels came off a mustang. If i changed the center caps they would look like any other Bullit wheel on the market. Why???? because they fit and look fuckin sick as hell.

[blah1752]

That is the best sound I've heard from a v6 with flowmasters!  Awesome dude. What are your wheels? Those are looking sweet!

[DNALI]

@blah1752 Apreciate the feedback man. they are mustang bullitt style wheels.

[goodson305]

@DNALI Damn,very nice I like the sound how much it cost to buy and the installation? I need this one for my car.

[DNALI]

@goodson305 Cost me rund 600 for the whole set up. im sure u could find it cheaper tho.

[goodson305]

Perfect equal sound.

[HwkyPlrs]

@dnali ight when you get the number jus let me kno. Thanks man

[HwkyPlrs]

@dnali dude were'd you get this exhaust?

[HwkyPlrs]

@dnali hey dude can you tell me were you bought this and what part number it is cuz i want mine to sound like that but idk were to loom

[HeyKid137]

I have an 03 LS, how much did you spend on it

[DNALI]

@HeyKid137 hey i paid about 600. its a cat back system with stock piping. i had the cat and resonator done a diferent time then the mufflers. most muffler shops would replace the piping in between if u do it all at once. probly be cheaper too.

[ohyes247]

nice for a v6 qith V8 exhuast

[sleepr2ride]

what all was done to this exhaust, u added duals after the resonator ?

if you dont mind telling me, how much was this whole new setup? thx

[DNALI]

@sleepr2ride hey i cut the catalitic converter and rezonator out and replaced them with high flow units then had installed a y pipe with the two flowmaster mufflers. i had everything done for under 650 but i got the rezonator and cat insatalled before the mufflers so im sure if you got it all done at once it wouldnt be as much.

[CaptainMcAwesomeFace]

What kind of wheels are those?

[DNALI]

@CaptainMcAwesomeFace they are mustang wheels of a 07 gt.

[MINICLIP47]

how much???

[PAKMAN144]

nice engine but i know a better noe with a sweet sound system

[arturorock8]

dang dude thats a loud ass rev

[DNALI]

@arturorock8 in all honesty these engines are not very flattering at high revs. once you get past 2 and a half 3 gs she definatly sounds like a v6.

[oilfield666]

@DNALI any v6 will sound like a v6....the other day i seen a new camaro with v6 and exhaust take off from the lights......jesus christ that was horrible

[Achung1970]

Are those series 60 mufflers and is the resonator stock. What size are those. I like the way it sounds

[DNALI]

@Achung1970 the resonator is not stock, i had flowmaster high flow cats and resonators installed aswell as the series 60s.

[CESAR213]

around how much did you pay for that setup?

[DNALI]

@CESAR213 i went to a custom exhaust shop here in toronto. and the basicly just cut and welded all the components out then in. the whole duals them selfs from the y pipe back was $400. and the high flow catalitic converter was 150 and the resonator was 120. everything was welded by a shop. im pretty sure my mufflers are flowmaster 60 series but i will go get the serial sometime tonight and look them up.

[wootness3000]

Sounds like you have a bit of a knock. :O

[DNALI]

@wootness3000 not too sure what a knock sounds like. but she runs powerful and clean enough for me.

[oilfield666]

@DNALI there is no knock there, no idea what that guy is hearing.....knock sounds like metal knocking on metal....higher milege engines will knock. or piston slap during cold start up (aluminum pistons get worn and clearances get too large untill aluminum expands as engine warms up)

[kullprit]

sounds pretty nice

[lil901memphis]

where did u get your y pipe and cai

[SonnyCarino]

they got the Y pipes on ebay for like 15 bucks, ud be better off getting the flowmaster 1 in 2 out dual exhaust muffler

[818trusty]

hey man thanks for the reply. i appricate it bro. thanks alot:)

[818trusty]

just wondering. i got a 2005 impala and im thinking of putting on some flowmasters as well but i need some advice. Also what series did you use and what did you do to make it sound something like yours. let me know thanks

[DNALI]

wats up man. all the piping is stock. just get cut out ur cat and resonator and install high flow units. dont just cut them out it will sound too raspy. then i had it y piped like an ss and installed flowmaster 60s. this car also has a cai wich makes the exaust note a lil deaper aswel.. good luck man

[kennyraythaprince]

you have a stoc 6 in it>?

[DNALI]

yes aside from the items listed above this is a stock 3800 v6

[autogeek23]

ver nice. diggin the rims.

[MrJabrilAli]

wat song is that in the beginning

[DNALI]

myself Dnali- Lets Go more at soundclickdotcom/dnali

[Pickleator23]

wat engine does that have in it...3800 series?

[DNALI]

yes 3.8. series 2

[SPOT187]

how much do u think it would cost for chrome pipes

[DNALI]

the shop i went to was gna charge 125 for chrom tips. i think these ones came to 50 for both. mite be lucky and find some cheeper tho i never realy looked around

[SPOT187]

Appreciate it hommie i think imma just save up for the chrome cause I got chrome rims. thanks bra

[TheJoshman361]

where did you get that tail light piece ???

[DNALI]

painted them myself. just took em off used margarine containers for the circles and got the vet logo from the chevy dealer.

[quilltape]

hey bro that sounds sick what series muffler you using what size pipe list everything i want mine to sound like that

[DNALI]

pipin is all stock. i basicly choped out the stock resonator and cat for high flow units. and had a y pip installed with what i belive are 60s.

[quilltape]

well how ever sounds bad as man good job

[RNelson11687]

whats the need for the 4inch tips?

[DNALI]

like a boom tube. gives it a different sound than just comming out of your regular 2 and a half inch pipe/

[ruyguy331]

hey can you explain what parts you used to do this and maybe give some links cuz i have an 01 impala ls and i cant find the parts after the y pipe

[DNALI]

i went to a custom exhaust shop here in toronto. and the basicly just cut and welded all the components out then in. the whole duals them selfs from the y pipe back was $400. and the high flow catalitic converter was 150 and the resonator was 120. everything was welded by a shop. im pretty sure my mufflers are flowmaster 60 series but i will go get the serial sometime tonight and look them up.

[saabkyle04]

Badass sounding Impala man!

[DNALI]

have to look up the series but ive had em on for 2 days when the vid was taken

[CarCrazyMike82]

that sounds good. What series is that and how long has it been on the car?

[DNALI]

i think there 60 series. not 100% sure