Carbed LS's rule. I'm doing a 6.0L swap in my 74 Chevelle and also thinking about dropping my th350 for a t56 as well. Do you thing you can send my the link for your t56 swap? I could really use the help since no one has done either of these swaps to my car.
Hey what kind of transmission do you have matted to the LS1? is it the stock 4L60E that came with the 95 model truck? and did you have to get new motor mounts for the LS1 conversion? what about the wiring harness? how difficult was the conversion, and how much did it all cost? I am wanting to run a similar setup, on a similar vehicle, mines a 96 chevy, and i want to get an 01' LS1 Block to swap it in my truck, Thanks man, sick truck you got there!!!
Hey BigBeast88, Thanks for the comment! #1)- In this Video we have a turbo 350 on it, but we have since then swapped it out and we are now running a t56 in it now. #2)-Yes we had to use motor mount adapters from trans dapt. #3)- As for the wiring harness, we used the edelbrock conversion kit that has the box and harness. #4)-The conversion was pretty easy but then again I have been workinh on cars since I was 7yrs old. #5)- We have about $3500 in the conversion...
We paid $1800 for just the motor and carb conversion kit.. it's the little things that add up. I did this swap in El paso and they have nothing but dirt over there! If I would have done the swap here in Fort Worth it would of been half the price. Here is a link that will take you to the build of the truck and also when I did the 6 speed swap. Good luck on the build and if there is anything I can help with just ask,
did you have any problems with the hot cam being it was made for efi engines? i have that cam kit. i was wondering if i could use a victor jr. how do you feel about your choice in carb? thnx for the info.
now do you have to have a distributor or just edelbrocks ign box? also, how the heck do you time it?
im gonna be 6.0 my nova with a carb this winter and was wondering how that set up worked for you.
nemodapimpfish 1 year ago
Wish you would have got the MSD 601 box yet? The timing chips that come with the Edelbrock kit are junk.
ZONES89RS 1 year ago
@ZONES89RS why r they bad?
codysk8ter95 4 months ago
I bought the same edelbrock intake and ignition controller for a 6.0 to go in my nova. You dont have to mount the ignition box right there do you?
Matt87Kellum 1 year ago
what type of intake gasket did you use? need help?
Mld1st 1 year ago
Carbed LS's rule. I'm doing a 6.0L swap in my 74 Chevelle and also thinking about dropping my th350 for a t56 as well. Do you thing you can send my the link for your t56 swap? I could really use the help since no one has done either of these swaps to my car.
BigRed10287 1 year ago
Nice I am wanting to put the 6.0 liter in my 88 chevy I think the lq9
Hoffmancody 2 years ago
Hey what kind of transmission do you have matted to the LS1? is it the stock 4L60E that came with the 95 model truck? and did you have to get new motor mounts for the LS1 conversion? what about the wiring harness? how difficult was the conversion, and how much did it all cost? I am wanting to run a similar setup, on a similar vehicle, mines a 96 chevy, and i want to get an 01' LS1 Block to swap it in my truck, Thanks man, sick truck you got there!!!
BigBeast88 2 years ago
Hey BigBeast88, Thanks for the comment! #1)- In this Video we have a turbo 350 on it, but we have since then swapped it out and we are now running a t56 in it now. #2)-Yes we had to use motor mount adapters from trans dapt. #3)- As for the wiring harness, we used the edelbrock conversion kit that has the box and harness. #4)-The conversion was pretty easy but then again I have been workinh on cars since I was 7yrs old. #5)- We have about $3500 in the conversion...
DOMINGUEZ327 2 years ago
We paid $1800 for just the motor and carb conversion kit.. it's the little things that add up. I did this swap in El paso and they have nothing but dirt over there! If I would have done the swap here in Fort Worth it would of been half the price. Here is a link that will take you to the build of the truck and also when I did the 6 speed swap. Good luck on the build and if there is anything I can help with just ask,
DOMINGUEZ327 2 years ago
This has been flagged as spam show
did you have any problems with the hot cam being it was made for efi engines? i have that cam kit. i was wondering if i could use a victor jr. how do you feel about your choice in carb? thnx for the info.
investamericagroup 2 years ago