Spartan Doctrine 110mm Airsoft Silencer (Airsoft-Club.com)

[TheCoolmonkey24]

Can you use this for your g&g gr16?

[aderonn]

@TheCoolmonkey24 If you can get the flash hider off, or replace the barrel, it will work. But the flash hider is a pain to take off.

[1821mak]

How did you get sponsored by airsoft club

[aderonn]

@1821mak They came to me. But for any sponsorship, you need to acquire a large subscriber base on your own before companies will be interested.

[ForgottenAirsoftHD]

How Long Did It take to Arrive??

[aderonn]

@ForgottenAirsoftHD It normally takes between a week and 10 days for their stuff to arrive at my house after ordering.

[NeonVars]

Okay so negative thread goes with negative thread right? Or is it Negative goes with positive thread. Educate me please. I'm still very new to this, evidently screwing things as well.

[aderonn]

@NeonVars If your gun has negative threads, you will want a silencer with negative threads.

[IAirelandairsoft]

aderon i know that you said a silencer doesnt really supress the sound at all. But the Madbull gemtech silencer i have actually does!

[757anorfan]

I ordered one of these from airsoft club. It was airsoft doctrine. Basically the same thing only mine was the special forces one. And it was the same length too. But on mine, both sides unscrew. So I don't wanna sound offensive or anything but maybe you're not turning it hard enough?

[aderonn]

@757anorfan You might be right. For mine, one side unscrewed very easily and the other didnt. I'll try again and see if I can unscrew it.

[AirsoftStlouis]

Fantastic deal, $14 shipped! Thank you!

[bros4life98]

Also how much is shipping on airsoft club?

[aderonn]

@bros4life98 It depends on what you buy. Add what you want to your cart and there will be a shipping calculator on that page. Small stuff can be around $10 and larger stuff up to $30ish. It just depends.

[TheLastSurvivalist]

Hey you should do more field test, like it would of been really nice if we could hear how quite it made the gun. It's just a suggestion though. Great videos though.

[aderonn]

@TheLastSurvivalist I don't currently have any non-blowback gas pistols, but if I get one with threads, I'll make a test to see how it works.

[Sk8WithASideOfRandom]

Hey aderonn i just got my silenger today and both of my ends come off but the trads are sifferent on the adapters and you cant change them, i tried.. i wanted the logo at the sides but it wouldnt

[Lm0956]

I like the way silencers look on anything besides shotguns

[SecretPerson132]

Yes, silencers do look on airsoft guns!

[GUYVERx4]

I have a JBU 6.75" MSS and a Madbull Surefire QD 5" I prefer the look up a suppressor, but a sturdy barrel and suppressor are a must! the JBU while being light isn't that sturdy and kinda bulky, if you knock it (which is easy to do in field woodland play) the surefire mockup is superb! very solid while being light weight, very nice quality and not much more in price than the JBU MSS

[NUMBAHUNO]

Where do you buy your guns?

[aderonn]

@NUMBAHUNO Online mostly. Evike, AirsoftGI, AirsoftStation. This one was purchased from Delta1 from Godsairsofters and AirsoftTalk.

[TORNxBigxBro]

i just got that sight (aimpoint) , do you think you could do a review on it, and it seems like i can't zero it in, or bring it into the center at all for that matter, thanks

[AnotherGaisle]

Is there a typo on the print of the silencer? It says "MODLE" and I would assume it should be Model.

[zactheman999]

there called supressors. not silencers :/

[ratedrforbinladen]

@zactheman999 they are actually called both

[aderonn]

@zactheman999 I would normally agree with you in, but in legal documentation they are sometimes referred to as a silencer.

[asianpwnyourbigass]

@zactheman999 it's the same thing practically

[Theninjalemon]

@zactheman999 i think its just a term, people refer this to the "clip/magazine thing" but they are two diffrent things, i dont think it really matters honestly silencer is just a term for suppressor.

[TheAirsoft4life]

Hey I just got a kwa m4 devgru cqb what upgrades should i do ?

[aderonn]

@TheAirsoft4life I don't recommend doing anything to it if you just got it. Use the gun as is for a while and upgrade it later on down the road.

[Samsterdude1]

@TheAirsoft4life I have a KWA SR7. You really don't need to upgraded anything. I plan on installing a MOSFET because I use a lipo. But stock the gun shoots great!

[DFWWARPIGS]

Good job...and they look good on airsoft guns .....I use them to hide longer barrels on certain applications

[AirsoftShizsAndGigs]

gun looks sick dude!

[SlapBean]

geez. Australia is missing out on so much! Stupid Australian laws ;-;. Great review too :) wish i could buy airsoft items >->

[aderonn]

@TheArabNextDoor Oops, my bad. I'll fix it.

[hockeykid30b]

nice review!!! i subscribed, mind subbing back? it would really be a major accomplishment in my channel and it would be really appreciated to have such a great airsofter subscribed to my channel!:)

[aderonn]

@hockeykid30b Sure, but not just ecause you asked, but i really do think your channel is worth subscribing to. it looks like you put a lot of effort into your channel and care about making videos. Good luck.

[hockeykid30b]

@aderonn thanks! i do put alot of time into it. and im so glad you like it :D!!! thank you!

[OrdinaryAirsoftTeam]

@aderonn That is what I like to see! Aderonn helping out the little guy. Truly do appreciate this because too many Youtubers in the airsoft community refuse to do this!

[trevrox814]

on the QOD mean HOW do you think silencers look on airsoft guns

[zactheman999]

@trevrox814 thats why he did an anotation. dumbass

[trevrox814]

@zactheman999 I saw it the first 10 minutes it was uploaded and he didnt put the annotation up yet so dont just be a jerk about some small thing.

[artichokedanny]

What's up

[Stryker0726]

could you take a ccw gun and attach the silencer, then take a cw gun and put it on the other side, so like a double airsoft gun, exept you would just shoot into the other gun....but oh well

[aderonn]

@Stryker0726 Lol yeah I suppose you could.

[aderonn]

The green screen didn't work well with the tan and green gun. I'm considering using a blue screen in the future since airsoft gear is rarely blue.