Has anyone noticed the way most notches are made? If you look at ISA standards now they are to be cut with the angle facing the ground and the flat cut on top or with both angle cuts on top and bottom not with angle on top and flat cut on bottom. You would thing a saw manufacure would do it to ISA standards. Just my opinion.
knocking down trees in Germany with a Swedish built saw, love it... oh yeah, when are they going to start selling those pants in the U.S.? I want a pair.
Looks like a really nice saw, checked 1 out at my dealer, looks to have quite a bit of power but why do the Europeans seem to always run tiny guide bars on their saw's? I mean I have a 357xp w/ a 20" bar and it go's great, the one in the video couldent be any longer than 16"
The 562xp I had was phenomenal. There is no doubt this saw is a game changer. I don't believe the one I ran had any defects in the 5 tanks of fuel that were put through it, but nonetheless it went back as requested. There is definitely a spot waiting for one when they come back. Well worth it, never handled a saw quite like it.
@zigZag776 autotune means that the carburator has no adjustments scrues, like H-L- T, to adjust air. i hope you understand, my english is not very good.:)))
@skywalke112583 Thanks. I understand what it is. I guess what I meant is why is it used? I never used an autotune carburetor but it seems better if you can adjust it. What's your thoughts on it?
@zigZag776 i think the same as you doo, and i also never used a chainsaw with an autotune carburetor and i'm very happy with this one. i have a 372xp and 365 special with a walbro carburetor on it but it runs like hell:)).i'm very pleased with this kind of carburetors.but since i never used one with autotune, i dont want too say anything to upset others :))))). onestly i wish to buy a 560 xp, but i have secondthoughts about it . what do you think,of heard of this model? thanks!!!!!!!!
REDNECKCABLETV, The new 562XP will hold anything between a 16 and 28" bar. Because of the CC's of the engine and the length of the bar it will have a large mount.
Well, i have had the chance to try these new saws out today, very very nice indeed!! I'll post a couple of films of this soon! The techs also told me that the Revboost function on these new saws has been cancelled. I don't know why, but as far as i have experienced today, this function won't be missed!
At the moment oktober is mentioned to be the month of release here in Europe, i don't know about the rest of the world though. What they will be releasing here will be the following; 555xp, 560xp, 562xp and the t540xp, they might also be releasing a 550xp which will be replacing the 346xp. Also the Techlite bar will be comming, but only in a few lengths, i believe 12 and 15 inch for climber saws (the t540 will be delivered standard with a 12 inch) and for big mounts in a 20 inch and a 28 inch
Has anyone noticed the way most notches are made? If you look at ISA standards now they are to be cut with the angle facing the ground and the flat cut on top or with both angle cuts on top and bottom not with angle on top and flat cut on bottom. You would thing a saw manufacure would do it to ISA standards. Just my opinion.
anderae1969 3 weeks ago
best chainsaw video
lj2729 1 month ago in playlist Favorite videos
so dramatic. haha. i guess they want people to bite.
Mr13born79 1 month ago
I'll stick with my trusty 372 XP and 390 XP. Simple. Perfect.
neurotyrant 2 months ago
@neurotyrant amen brother
4inches4u 2 months ago 2
knocking down trees in Germany with a Swedish built saw, love it... oh yeah, when are they going to start selling those pants in the U.S.? I want a pair.
timbermansam 3 months ago 2
Looks like a really nice saw, checked 1 out at my dealer, looks to have quite a bit of power but why do the Europeans seem to always run tiny guide bars on their saw's? I mean I have a 357xp w/ a 20" bar and it go's great, the one in the video couldent be any longer than 16"
MrAirbiscut 3 months ago
@MrAirbiscut
You lose power, a short bar is much faster
with delimbing you have to keep the body of the saw on the trunk, a long bar stuck in sand or dirt.
More heavy, gyroscopic effect is bigger. witch mean slower delimbing
densmee 3 months ago
this video makes me so happy!!
LittleofLife 3 months ago in playlist LittleofLife's favorites
LOVE this video!!!
LittleofLife 3 months ago
I didn't know a chainsaw commercial could be so cool.
jangalomph 3 months ago
what is to comment? this saw has a tromendeus force..........is light and easy to manover. i don't need anything else
skywalke112583 3 months ago
The 562xp I had was phenomenal. There is no doubt this saw is a game changer. I don't believe the one I ran had any defects in the 5 tanks of fuel that were put through it, but nonetheless it went back as requested. There is definitely a spot waiting for one when they come back. Well worth it, never handled a saw quite like it.
tkenn21bb 4 months ago
What's the deal with the autotune? I don't know that I'd like that.
zigZag776 4 months ago
@zigZag776 autotune means that the carburator has no adjustments scrues, like H-L- T, to adjust air. i hope you understand, my english is not very good.:)))
skywalke112583 3 months ago
@skywalke112583 Thanks. I understand what it is. I guess what I meant is why is it used? I never used an autotune carburetor but it seems better if you can adjust it. What's your thoughts on it?
zigZag776 3 months ago
@zigZag776 i think the same as you doo, and i also never used a chainsaw with an autotune carburetor and i'm very happy with this one. i have a 372xp and 365 special with a walbro carburetor on it but it runs like hell:)).i'm very pleased with this kind of carburetors.but since i never used one with autotune, i dont want too say anything to upset others :))))). onestly i wish to buy a 560 xp, but i have secondthoughts about it . what do you think,of heard of this model? thanks!!!!!!!!
skywalke112583 3 months ago
This has been flagged as spam show
if blockbuster had videos such as this they would not be bankrupt
emigrantgap 4 months ago
if blockbuster had videos such as this they would not be bankcrupt
emigrantgap 4 months ago
REDNECKCABLETV, The new 562XP will hold anything between a 16 and 28" bar. Because of the CC's of the engine and the length of the bar it will have a large mount.
HusqvarnaUSA 5 months ago 2
Well, i have had the chance to try these new saws out today, very very nice indeed!! I'll post a couple of films of this soon! The techs also told me that the Revboost function on these new saws has been cancelled. I don't know why, but as far as i have experienced today, this function won't be missed!
DUTCHHUSKY66 5 months ago
At the moment oktober is mentioned to be the month of release here in Europe, i don't know about the rest of the world though. What they will be releasing here will be the following; 555xp, 560xp, 562xp and the t540xp, they might also be releasing a 550xp which will be replacing the 346xp. Also the Techlite bar will be comming, but only in a few lengths, i believe 12 and 15 inch for climber saws (the t540 will be delivered standard with a 12 inch) and for big mounts in a 20 inch and a 28 inch
DUTCHHUSKY66 5 months ago
when is the 562xp going to be available?
skibissell 6 months ago
how big of a bar could said saw run? 3ft?
REDNECKCABLETV 6 months ago