Airsoft Gun Repair AEG Repairs and Reviews

[swordmasteral]

My crosman pulse dp4 shoots 2 at a time when in semi and skips shot in full auto any ideas how to fix it?

[ozzylover1234]

@swordmasteral the plastic might have melted in the gearbox because its a crossman and crossman sucks. dont try to fix it you wont be able to

[swordmasteral]

@ozzylover1234 ok

[your0wner444]

someone help my carbon 15 (m4 cqb) is stuck on full auto! help? pm or comment if you know how to help!

[gruntguy300]

i just switched my pistol grip on my m4 so i had to take the motor out and everything, but when i put it all back together it makes the sound of a hair dryer when i shoot

[cetaphil69]

im joining

[2fisherman4]

what if you pull the trigger with battery in and not on safe and all you hear is a *click* what do you do??? i got a klashkinov ak47

[airsoftpro3101]

Can someone help me fix my galaxy/jg mp5k? The mag that it came with won't wind and the gun won't feed with it.

[IGnITzxDoNZ]

@airsoftpro3101 hold the gun upside down and shoot

[DefilerhXc]

any ideas how to repair my tm famas, the release lever is catching and makes the gears wind after a full auto burst, it alos stops me from using single shot???

[TheBadass2421]

on my G&G gr16 blowback my fire selectore switch is relly hard to move frome safty to semi got any ideas what it could be or how to fix it please respond going to a war soon and dont want to miss it

[ZaCkOX900]

@TheBadass2421 There are problems with the selector switch in these G&G low cost series. I don't know if replacing it will fix it. Just letting you know you aren't the only one.

[TheBadass2421]

@ZaCkOX900 well mine was 230 so im kind of pissed but its moving better now

[ZaCkOX900]

@TheBadass2421 That is why I won't buy the low-line anymore. I'm looking at $300+ dollar guns.

[firebad0]

wow, your haircut has changed alot

[natechand30]

@bravoforceairsoft

thanks but i figured out the problem 

[natechand30]

hello crazyNCman to start my initals are N.C second i plug my battery in shoot but nothing comes out i checked the fuse and everything is perfect the battery is charged what do i do

[bravoforceairsoft]

@natechand30 maybe something is wrong with your tappet plate

[xxxmatthewcadenaxxx]

my airsoft revolver hammer broke. How do i fix it

[GeekUltra]

Is there any way you can repair cracks in the ABS plastic?? it's just a tiny little crack but I don't want it to get any bigger.

[crazyNCman]

@GeekUltra yes there are plenty of plastic repair products on the market.

[crazyNCman]

@GeekUltra yes there are plenty of plastic repair products on the market.

[HalfaU0mega]

@GeekUltra If you dont mind a little hard work, try some gorilla glue and shoe glue, my friend fixed his SIG 552 stock w/ it. You may have to do a tiny bit of sanding and painting though. And please dont get me on this, he broke something off of his gun so i'm not sure if it will work or not.

[airsoftMadness9]

HELP! My G&G gr16 (scar L) wont work, when i pull the trigger it makes a muffled sort of grinding sound like "errrrt" and I bypassed the fuse checked the battery and the motor conections. What could be the problem king

[ekem13]

@airsoftMadness9 Your anti-reversal latch? or a broken piston?

[Hisssna]

ok my l96 broke cause my jackass friend kicked it so yah please message me back i really love this gun and its so strong

[packofwolves93]

my mp5n's bolt is shattered and the piece where the bbs get fed in is shattered...i dont know how they got like that.....coud you tell me how i can fix this or where i can go to get it fixed thnx

[Killasniper232]

there is no wallmart in Germany :)

[xXRequiremXx]

my guns fuse and motor connections are fine but when i fire, nothing comes out and it makes a high pitched sqealing noise or no sound at all. I've tried adjusting the motor height but can't get it to the right sound. Any help?

[theawsomericky]

i need a new battery because someone stole mine but it sucked anyway so i cant test it until then

[theawsomericky]

thnx

[theawsomericky]

what is the best of these gram bbs .20, .25, .48 i have all but i dont know what i should get more of

[0GEEZER9]

@theawsomericky depends on ur gun iv m4 i use .25s, 48s are out of the question but 2s are fine though not as accurate.

[realtoyz13]

test em in your gun, see what works best for you.

no offence but it's a bit of a stupid question since only you can test it.

[meg18241]

u should do a review on that a47 in the black box please.

[crackedjacker]

its cool watchin all of your vids as your video quality gets better and better

[manxdude1]

i need a uk gun repair shop! does anyone know somebody in uk? need my gas sigma 40 trigger fixed.

[BlackSkullsAirsoft]

do you know anywhere in new jersey where i can get my army armament l85a1 repaired? i cant seem to find one.

[TheFarmrBoy]

i have a JG ak47 and it crapped out after three months or so of use. nothing rattles on the inside or appears to be broken. i get no response from the gun even with the battery hooked up. any suggestions??

[taterbuzz]

Maybe wiring problems or possibly fuse. Or your battery might have just crapped out.

[TheFarmrBoy]

aight thanks.. i just took it to godfather paintball (and airsoft) and let them fix it for like $35 bucks which wasn't bad.. somethin internally was screwed up

[taterbuzz]

That's good.

[crazyaznpower12]

motor connection and fuse check those.

[Leojx94]

Next time get a G&G, even the plastic versions are great. Difference between the 2 are that most of the Full Metal AEGs Recommend a 9.6v -11.1v lipo. The plasitic version runs on an 8.4 instead.

[Turrick16]

maybe but not truly sure, maybe it is the trigger wire is came off or bunt off either way double check if it is that then u go

[BeAwsum]

cool thing about airsoft fuses there are the same as ones as in computers.

or you could just by pass it.

[jonen9494]

Hey! great vids,ad i wont miss out your next live, t whats your intro song?

Thanks

[FANGairsoft]

whens the next show?

[crazyNCman]

every Saturday night

[EJR1998]

@crazyNCman Hey man. Me and my Mom and Dad are going to stop by your shop in October. Where vacationing in Tennesee so we wanted to drive to Ashville and I talked my dad into taking me to your shop.  If I can find something I will buy it if I have enought :P.

[crazyNCman]

@EJR1998 Ahhh I have not worked there for 6 months.

[EJR1998]

@crazyNCman Oh ok. You commented on my comment I just craped a gold brick.

[Nashtrosa]

can u do a review on the sig 550

[Thetarheel25]

i live in NC too

[iconclanXLR]

well i live in the same state as him

[sammyjisdaman]

well i live in sc

[craky2]

i live in you time zone :D

[whysogrim]

My gun isn't shooting anymore. I took out the motor and the gears were chipped a little. The motor spins when it is out of the gearbox but as soon as I put it in the gearbox it sounds like it is stuck. It even started to smoke. I was running a SRC Ultra High Torque Motor.

[FLteenm1a1]

Do a review on the KART m14 JAE no one had a gud review one it!! u guys have it at ure store too!

[mattot247]

Alright. Just bought a 1600 mah battery and was wondering about how long i should charge it.

[volcomsk8tr1125]

charge the battery using this equation. MaH number of batter so in this case is 1600 and then divide it by the MaH number on the charger and you should get a whole number around 7 or 8. thts how many hours to charge it

[herulf123]

Look at the charger... should be a sticker or somthing that says the DC output and the MaH.... what ever the Mah on the charger is say its 500 mah... battery is 2000 mah=4 hours.. i think this is correct...

[nerfrulz]

hey could you go over rewireing because my cybergun m1a1 is constantly needing wire repair where the wire that connects the battery to the fuse keeps comming undone

[Pacmaan1992]

the global leader of airsoft STFU?

[crazyNCman]

Bow down to the king! The King of Airsoft!

[Pacmaan1992]

ahahaha?

[BigBeefBoy52]

"everybody else has to follow" haha funny man!!

[horrorbusiness420]

i live in Canada and the city i live in will not allow a wallmart to be there haha , alot of towns/ citys boycott wallmart.

[NickDenning3]

haha why?

[jmeisintense]

where i live we have like 8 wal-marts

[jonen9494]

yOU GUYS GET ME ALL WRONG! CrazyNCman, I am one of you subscribers, and I appologize if I hvae insulted you in any way, But it just seemed to me that you jsut call yourself a guru. I didnt check my info. .Sorry :)

[lufah234]

Actually in LA there are no walmarts, they're banned or something

[lerbelz]

k thnx

[lerbelz]

would you say it is okay to use a gravity fed aeg?

[ztejas13]

uhhhhh....

no

[aalltheprotector]

not as good as proper mags

[iAirs0ft]

im not home on saturday nights for the next 4 weeks..

[imbordashell]

yay being in a electical class at my school finally pays off

[crazyNCman]

What are you a moron or somthing? Hmmmm live streaming video webcast VS a Youtube video. What would be better??!!

[lilkilla923]

its your fault that u cant stay up after your bed time so it's your loss

[crazyNCman]

Guess he didn't want to look like a moron on my comments. Oh wait...stupid viewer email will make him a moron on a LIVE webcast!

[memkills]

oh kewl i thought i was the only one using a volt meter for batteries and fuses and chekin the motor and stuff.... sweet

[URM0MW4NT5MYJUNK]

have you done a review on the G&G gr16 electric blowback (abs body version)...well if not you should! glad to see that your getting rolling again

[zerocheese]

Maybe it was just me just this one time, but this video took forever to download and play while other HD ones did not at nearly the same time. Maybe the compression needs some work maybe not just consider it for your next video.

[painfull94]

i am pumped

[Lancer667owns]

the walmart in my town went out of bussiness

[lilballa7]

Wal-marts don't go out of business.... Hahaha

[Vujovich64]

they only migrant

[Lancer667owns]

it did!! they opened a k mart where it was:(

[ajsnuker]

GOOD!

[SHORTREAPER117]

crazyncman is now a tagger! Just kidding can't wait to see you live this saturday

[magic4yu]

omg you did that with sharipe!! dang 5/5 for just that lol

[shane4121928]

o yea forgot 2 ask goin 2 have your guest star this saturday?

[shane4121928]

cant wait for saturday glad to hear ur sounding better thanks for answering my questions last saturday

[TechTalkr94]

no walmart in england but walmart own ASDA

[chicken11999933]

good job with that sharpie!!!

[sniperking001]

i blew my fuse in my new gun the first day i had it lol. then i swaped it out for a good non chinese one.

[ericlhaboi]

how did you blow your fuse?

[craftonXD]

Sometimes if you disconnect or connect your battery wrong it blows the fuse. Like if you slip up when its half plugged in.

[sniperking001]

i have no clue i think it was cause it was a crap chinese fuse.

[tankcommander94]

We dont have a Walmart in the Uk. Walmart own ASDA in our country, and they dont sell anything above £5.00. Plus the law is different in the Uk about airsoft!! Anyway great review, ive subscribed, keep going!!

[ferrero129]

hey dude im in the uk as well ^.^ and that is ture but i found a place where i like and i found shot guns and all that well not alot about 15 or so but good =D

[mystrojack]

ur to up yourself lol

[airsoftaegs]

more like 243 watching your live show including me

[Lollerobot]

oh yeah ! i can again come to ask questions and you try say my name ...

[jonen9494]

Who says you'r the "Guru" ?....

[Ganonman2]

many people...look through all his comments

[idontshower2006]

The 14000+ subscribers he has.

[tfoshohoe]

the fluke meter i have automatically knows ac dc bla bla bla its awsome but alot! of money!

[flyingbelsey]

Just an observation, you say "you kids" quite a bit.

Is the majority of your viewing audience in their teens? Around here the airsofting community is mostly made up of people in their 20s and 30s.

Just curious I guess. I think I'll tune in to your webcast, since you keep badgering me. :P

Keep it up. :D

[ninjuggalo420]

saftey first shit yeah

[damcg15]

crazy ill be sure to definately watch on saturday u rock man best airsoft review vids on youtube

[liberator416]

rad shirt

[theamazingblazing541]

men you rock dude

[ultumitbmx]

man** lmao

[toastertomattoe]

support ncman!

[rubikon29]

I wanna say thank you to you and your co-workers for you helpfulness when i called in with my concerns about my air soft gun.

[crazyNCman]

Please do not post those "first" comments.

[WaCKafAce]

Yeah, I hate it also.